A Groundwork company - serving Dallas, TX
Groundwork Construction Co. of Dallas construction team

Wrought Iron Fence Cost in Dallas - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Wrought Iron Fence Really Costs in Dallas, TX (And What You’re Actually Buying)

Plan on $3,500 to $9,000 for a typical Dallas residential ornamental fence project, which works out to roughly $35 to $100 per linear foot installed depending on gauge, coating system, and custom detail. The single most useful thing we can tell you up front: true wrought iron hasn’t been manufactured for residential fencing in decades. Nearly every “wrought iron fence” quote you’ll get in Dallas is welded steel tube, and the price gap between a good one and a bad one comes down to wall thickness and the coating beneath the powder coat. Call (844) 797-4808 for a free estimate and we’ll walk your fence line and spec it honestly.

First, the Terminology Problem Nobody Explains

If you’ve been quoted a “wrought iron fence,” ask the contractor two questions before anything else: what’s the wall thickness of the tube, and what primer system sits under the powder coat? Most homeowners get a blank look. That’s the tell.

Modern ornamental fence in Dallas is welded mild steel tube, usually 3/4-inch or 1-inch square. The “wrought iron” label is a marketing holdover. This matters because the rust performance of steel tube has nothing to do with the name and everything to do with how it’s finished and where it’s cut. Open ends, weld joints, and field cuts are where water gets in, and once it’s inside a tube, the fence rusts from the inside out. You won’t see it until the paint blisters.

Dallas summers make this worse than most markets. Mornings here routinely run above 80% relative humidity, and that moisture sits on metal for hours before the day burns it off. A fence with a thin primer and a single powder-coat pass will show surface rust at the welds within about two years. A fence with zinc-rich primer under a proper powder coat will hold up for a decade or more. Same “wrought iron” description on the quote. Completely different product.

Dallas Wrought Iron Fence Cost by Tier

Here’s what the real product costs in this market, broken out by spec. These are installed prices, including posts, concrete footings, and cleanup.

Fence Tier What You Get Installed Cost per Linear Foot
Basic powder-coated ornamental steel Standard-gauge steel tube, single-stage powder coat, stock panels $35-$55/ft
Commercial-spec ornamental steel Heavier gauge, multi-stage zinc-rich primer plus powder coat, welded panels $50-$75/ft
Custom fabricated with finials and spear tips Fabricated to your dimensions, decorative finial and spear-tip detail, upgraded coating $65-$100/ft

For a typical Dallas front-yard run of 60 to 90 linear feet, that lands you squarely in the $3,500 to $9,000 range once you factor in a gate. A double drive gate, a grade change, or a corner that needs custom fabrication pushes toward the top of that band.

What drives the tier? Three things. Gauge of the tube (thicker wall costs more and lasts longer). Coating (multi-stage primer plus powder coat is the corrosion baseline for any steel fence in DFW). And detail work (finials, spear tips, custom arches, and the fabrication hours behind them). If a bid comes in well under $35/ft, ask what got skipped on the coating system. It’s usually that.

Why Post Footings Matter More in Dallas Clay

Dallas sits on the Blackland Prairie, and the expansive clay here swells and shrinks hard with the wet-dry cycle. If you’ve owned a home here more than a few years, you’ve probably seen the evidence: stair-step cracks in brick, doors that stick in late summer and free up in fall. Fence posts sit in that same soil.

Ornamental steel posts are typically 1-5/8-inch or 2-inch round or square tube. In this clay, a post set in a shallow hole without proper concrete encasement will rack as the soil moves. When the post racks, it stresses every welded panel connection down the line. That failure shows up three to five years after install, almost never gets covered by the original installer, and looks like a fence that’s leaning and popping welds for no obvious reason.

The fix is straightforward but requires discipline. Posts need concrete encasement down to 36 to 42 inches in this soil. It’s the kind of detail that doesn’t show up on a finished fence inspection and gets skipped by crews working fast. When we spec ornamental fence through Fence Installation, the footing depth is written into the bid, not left to judgment on install day.

What Separates a 10-Year Fence From a 30-Year Fence

The difference comes down to installation craftsmanship. Ornamental steel fence fabrication and installation is a skilled trade, and the detail work at corners, gates, and grade changes is what determines how the finished fence looks and holds up. A fence that runs a straight line across a sloped yard is easy. A fence that steps with the grade cleanly, hits every corner square, and swings a gate true after two years of clay movement takes a crew that knows what they’re doing.

This is where our background-checked, uniformed crews matter. They aren’t a luxury framing; they’re accountability for a product that will sit on the front of your home for three decades. Every ornamental fence project we install is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. Our technicians have up to 12 years of experience, and we use verified brand partners like PGT and CGI for the hardware components that matter.

  • Wall thickness: heavier gauge tube resists dents and rust-through; ask for the spec in writing.
  • Coating system: zinc-rich primer under powder coat is the corrosion baseline in North Texas humidity.
  • Footing depth: 36 to 42 inches, concrete-encased, in Dallas clay. Get it in the bid.
  • Gate hardware: hinges and latches take the most wear; don’t let a good fence get undermined by cheap hardware.
  • Corner and grade details: square corners and clean grade transitions are the difference between a professional install and a weekend one.

Should You Choose Steel Over a Wood or Aluminum Fence?

Ornamental steel is the longest-lived fence option for most Dallas yards, but it’s not the only one. If you’re comparing, a vinyl fence runs $3,500 to $9,000 installed, and an aluminum fence runs $4,000 to $10,000. Steel ornamental lands above both at the heavy-gauge and custom tiers, but it outlasts them in this climate by a wide margin.

Where steel wins clearly: security, sight lines, and lifespan. Where a wood fence makes more sense: privacy, budget, and neighbor agreements where the fence is shared. If your goal is a privacy barrier rather than a decorative front fence, Fence Installation in Dallas covers the wood, vinyl, and composite options in more detail. For a front-yard decorative fence that frames the house and holds its finish for decades, ornamental steel is the right call.

FAQs About Wrought Iron Fence Cost in Dallas

Get a Straight Answer on Your Fence Cost

If you’ve been quoted “wrought iron fence” without a gauge spec or a coating system spelled out, that quote is incomplete. Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free estimate and design consult. We answer live, 24/7. Upfront pricing, no surprises. And every ornamental fence we install is backed by the 730-Day Done Right Promise. Built to last, backed in writing.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas, TX.

What Our Customers Say

★★★★★ 5.0 from 4+ reviews

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

- Craig Whitaker

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

- Angela Wong

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

- Laura Bennett
Need Construction help in Dallas? Licensed & insured · free written estimates
Call (844) 797-4808

Request a Free Estimate

Tell us what's going on in Dallas. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch