Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence Cost in Dallas, TX: What Each Grade Actually Buys You
Aluminum fence in Dallas costs $28 to $42 per foot installed for residential grade, $38 to $55 per foot for commercial grade, and $50 to $70 per foot for industrial, pool-code-compliant grade. A typical Dallas yard run lands between $3,500 and $9,000 depending on grade, linear footage, and footing spec. Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free, itemized estimate that names every grade component. Live person, 24/7, ready to walk you through the difference.
Why two aluminum fences priced the same here are not the same fence
Aluminum won’t rust. That’s the pitch, and it’s true. What the brochure skips is that residential-grade aluminum on a long run across Blackland Prairie clay can rack at the rails within a few years if the post footing spec ignores soil movement. Dallas sits on expansive vertisols that swell and shrink hard through the wet-dry cycle. The grade of the fence matters as much as the material, and most per-foot quotes hide it behind one number.
The grade isn’t marketing language. It’s defined by picket wall thickness and rail profile, and those two specs determine whether the fence holds its position through a soil movement cycle or a spring straight-line windstorm.
What the grade specs actually mean
| Grade | Picket wall | Rail profile | Installed cost |
|---|---|---|---|
| Residential | .050-inch | 1-3/8-inch | $28-$42/ft |
| Commercial | .080-inch | 1-5/8-inch | $38-$55/ft |
| Industrial / pool code | .080-inch or heavier | Heaviest rail system | $50-$70/ft |
The rail is what resists racking force when wind hits the panels or clay shifts a post. Residential rail bends before it fails. Commercial rail holds position. On a 60-foot run over Blackland clay, that difference is the whole ballgame a few summers in.
Buying residential grade on a large lot is the single most common aluminum fence mistake we see in Dallas. It’s not that residential grade is bad. It’s that it was never spec’d for that length of run over that soil.
What “concrete footing” hides on a Dallas quote sheet
Aluminum posts here are typically set in concrete because expansive soil punishes anything else. But “concrete footing” describes two very different things. A 3-inch diameter footing at 24-inch depth and a 6-inch diameter footing at 42-inch depth both read “concrete footing” on a one-line quote. Only the second is adequate for Blackland Prairie movement.
DFW also runs a no-freeze-depth, high-wind-zone code reality. Builders here design for soil movement and wind uplift first, never frost. The footing has to do real work: depth and diameter control how the post performs through every wet-dry cycle, and concrete volume per post is a cost line most quotes bury.
- Ask for footing depth and diameter in writing, not just “concrete set.”
- Ask for concrete volume per post. It tells you whether the footing is real.
- Match grade to run length. Long runs over clay want commercial rail.
- Confirm the rail profile number, not just “aluminum.”
Local crews know the pattern: a post under-footed on Dallas clay shows up as racked panels and loose posts within a few dry summers. Getting the spec right up front is what keeps the fence looking new through the swings.
Pool enclosures: the upgrade most Dallas homeowners end up needing
Dallas pool fences fall under Texas Pool Code, which sets specific height and picket spacing requirements, and the installation requires a permit and inspection. A pool-code-compliant aluminum enclosure is commercial grade at minimum, often industrial grade. Many Dallas homeowners are replacing older wrought iron pool fencing with aluminum, and the spec questions they hit are exactly the ones above.
This is where grade stops being an upsell and becomes a pass/fail. Buy the wrong picket spacing or wall thickness and the inspection fails. We itemize the pool-code spec on the estimate so there’s no surprise at inspection.
What an upfront aluminum fence estimate should show
Groundwork’s aluminum fence estimate itemizes grade, picket wall thickness, rail profile, footing depth, and concrete volume. Not one per-foot number that obscures the spec. That’s the difference between a price and a commitment, and it’s why we back every installation with our 730-Day Done Right Promise: if it’s not done right, we make it right. Upfront pricing, no surprises.
Our technicians have up to 12 years of experience on ornamental metal and fence installation. We bring established material names like Boral and PGT into the conversation when a homeowner wants a specific look or finish, and we tell you straight when residential grade is fine and when it isn’t. Background-checked, uniformed technicians on every job.
Grade is the same principle that runs across our Fence Installation in Dallas work, and it connects to every project we take from foundation to finish line. If you’re comparing fence to other outdoor work like a driveway or patio, start from the home page to see how we scope the whole property.
FAQs
Aluminum fence in Dallas runs $28-$42 per foot installed for residential grade, $38-$55 for commercial grade, and $50-$70 for industrial pool-code grade, with most residential yards landing between $3,500 and $9,000. Call (844) 797-4808 for an exact itemized quote, and estimates are free.
Residential grade is cheaper per foot, about $10-$13 less installed than commercial, but it’s the wrong buy on long runs over Dallas clay. If your fence line is long or your yard moves with the wet-dry cycle, commercial rail holds position where residential rail bends. The cheaper fence that racks in a few years isn’t cheaper. Call (844) 797-4808 and we’ll tell you which grade your lot actually needs.
Yes, and it has to meet Texas Pool Code height and picket spacing requirements, which means commercial grade at minimum. Pool enclosures require a permit and inspection in Dallas, so the spec has to be right the first time. Call (844) 797-4808 to scope a pool-code-compliant enclosure with a free estimate.
We can get you on the schedule fast, and your estimate is free. Calls are answered by a live person 24/7, so you’re not waiting until Monday to talk to someone about grade, footage, or footing spec. Call (844) 797-4808 to book your estimate and design consult. Financing is available at 0% for 18 months, plus $1,000 off projects over $10,000.
If you want a price you can actually compare line by line, with the grade, wall thickness, rail, and footing spelled out, call Groundwork Construction Co. of Dallas at (844) 797-4808. Free estimate and design consult, honest answers on which grade your yard needs, and the 730-Day Done Right Promise in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas, TX.
What Our Customers Say
"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett