Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Kohler Construction
We provide independent Kohler construction, repair, and installation service in Dallas, TX: cast-iron tub installation and repair, Memoirs and Archer toilet service, Simplice and Crue faucet cartridge work, and Kohler shower system installs, all handled by technicians with up to 12 years of experience. Kohler products are worth the money when they’re installed correctly, and that’s the part most Dallas installations get wrong. We’re an independent Kohler service provider, not affiliated with or authorized by Kohler. Groundwork Construction Co. of Dallas works with Kohler product, not for Kohler. Every job carries our 730-Day Done Right Promise. Call (844) 797-4808 and a live person answers.

Why Trust Groundwork Construction Co. of Dallas for Your Kohler Construction?
Our technicians have installed and corrected Kohler fixtures across hundreds of North Texas kitchens and baths, so they recognize the products by their quirks. A Villager cast-iron tub sounds different under a mortar bed than one sitting bare on the subfloor. A Memoirs toilet fill valve that’s out of adjustment runs silently for ten seconds after every flush. That familiarity is why we can tell you on the first visit whether you’re looking at a repair or a replacement.
Parts matter as much as labor. We use genuine Kohler cartridges, fill valves, and trim kits wherever those parts are still available, and reputable aftermarket equivalents only for discontinued trim like older Memoirs spout assemblies. That keeps the finish matched and your warranty intact. We don’t claim to stock Kohler parts locally or carry inventory on a truck. Parts are sourced for each job after diagnosis and confirmed before we schedule the work. Our technicians are background-checked and arrive in uniform. Upfront pricing means the number you approve is the number you pay, and the 730-Day Done Right Promise backs every Kohler repair and install in writing. Live person, 24/7, at (844) 797-4808.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Dallas
These are the Kohler failures we see most often in Dallas homes, and what usually causes them:
- Bellwether and Villager cast-iron tubs that flex or crack at the apron. A cast-iron alcove tub weighs several hundred pounds and needs a mortar bed or a ledger to carry the rim. Set directly on the subfloor without either, it rocks slightly underfoot and shows a hairline along the apron within a few years. Dallas makes this worse. Our Blackland Prairie clay swells and shrinks with the wet-dry cycle, and a slab that moves even a fraction of an inch transfers that movement straight into a rigid cast-iron tub. Chipped enamel also starts a rust bloom that spreads under the glaze.
- Memoirs and Archer toilets that run constantly. Almost always a fill valve that’s out of adjustment or a flapper that no longer seals. Phantom running quietly adds to your water bill in a way you won’t notice until the statement arrives.
- Tank-to-bowl leaks at the gasket. When the closet bolts were set on an uneven floor without shims and a level base, the tank sits out of plumb and the gasket between tank and bowl weeps. You get a slow seep at the base and a faint sewer smell in the room.
- Simplice and Crue spray heads that lose pressure or stick in spray mode. North Texas water runs hard, and mineral scale builds inside the pull-down head and the diverter. The faucet isn’t failing. The head is scaled. A cartridge drip at the handle is a separate issue and usually the cartridge, not the faucet body.
- Seized shower valve cartridges. Kohler pressure-balance valves, including the 8304 and similar units, seize or start to scald when the original install never left an access panel. A simple cartridge swap turns into a wall opening because nobody can reach the valve.
Kohler Parts & Our Repair-vs-Replace Approach
We use genuine Kohler cartridges, fill valves, and trim kits where those parts exist, and reputable aftermarket equivalents only for discontinued trim. Parts are ordered for each job after diagnosis. We don’t claim local stock or parts on a truck.
Our repair-or-replace call follows the same logic on every Kohler job. Cast-iron tubs and ceramic toilet bodies are usually worth saving, because the Kohler body outlasts the parts bolted to it. A tub with enamel chipped through to the iron is a replacement decision, not a repair, since any patch will rust again. A toilet bowl with a failed glaze traps residue no matter what you do to the fill valve. We’ll tell you which side of that line you’re on, in writing, before any work starts. Call (844) 797-4808 for a free estimate on the Kohler work you’re weighing.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. A technician inspects the Kohler fixture in place, checks the model and series, and confirms the actual failure. On a running toilet, that means testing the fill valve and flapper separately. On a dripping faucet, it means checking the cartridge and the spray head before quoting anything.
- 2
Repair or install. We order genuine Kohler parts where they exist, then set the work. That means shimming and leveling the toilet base, bedding a cast-iron tub properly on mortar with a ledger carrying the rim, or adding an access panel behind a shower valve so the next cartridge swap stays a cartridge swap.
- 3
Test. Every Kohler job gets a live test. Flush cycles, fill levels, faucet spray and stream, shower pressure balance at hot and cold, and a check for leaks at the overflow, shoe gasket, and supply lines before anything gets closed up.
- 4
Warranty. The 730-Day Done Right Promise covers the work in writing. If a Kohler install or repair fails within that window, we make it right.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Dallas
We work with Kohler Bellwether and Villager cast-iron alcove tubs, Kohler Memoirs and Archer two-piece comfort-height toilets, Kohler Simplice and Crue kitchen faucets, and Kohler Choreograph and DTV shower systems. We also handle trim, fill valves, cartridges, and shower valve service on older Kohler fixtures. This fits the three jobs Dallas homeowners call us for most: bathroom remodels, tub-to-shower conversions, and vanity installations. If your Kohler fixture isn’t on this list, call and describe it. Kohler has made a lot of product lines over the years, and we’ll tell you honestly whether we service yours.
We Also Service These Brands
Groundwork Construction Co. of Dallas isn’t tied to a single brand, and that matters when you’re remodeling a whole room. We work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Toto fixtures alongside Kohler. You pick the product. We tell you what holds up and install it right. One contractor from foundation to finish line, and every brand choice held to the same standard.
FAQs – Kohler Construction Service in Dallas
Is Groundwork Construction Co. of Dallas authorized by Kohler?
No. We’re an independent Kohler service provider in Dallas. We’re not affiliated with or authorized by Kohler. We install and service Kohler products as an independent contractor, which means we can recommend what actually fits your home and budget rather than what’s on a manufacturer’s shelf.
Do you use genuine Kohler/OEM parts?
Yes, wherever those parts are still available: genuine Kohler cartridges, fill valves, and trim kits. On discontinued trim, we use reputable aftermarket equivalents that we’ve confirmed fit the fixture. Parts are ordered per job after diagnosis, and we confirm them with you before scheduling.
How long does Kohler service take?
Most Kohler repairs, including a toilet fill valve, faucet cartridge, or spray head, are completed in a single visit once parts are in hand. Larger Kohler installs, like a cast-iron tub or a Choreograph shower system, run longer and depend on the surrounding tile and framing work. Call (844) 797-4808 and we’ll give you a realistic timeline for your fixture.
What Kohler models/series do you cover?
We cover Bellwether and Villager cast-iron tubs, Memoirs and Archer toilets, Simplice and Crue faucets, and Choreograph and DTV shower systems, plus trim and valve service on older Kohler fixtures. If you’re unsure about yours, call and describe it.
Will service void my Kohler warranty?
Not when the work is done correctly with genuine parts. We use Kohler parts where they exist and follow the install methods the fixtures need, bedding cast-iron tubs on mortar and giving shower valves proper access. That protects your coverage rather than jeopardizing it. Call (844) 797-4808 with questions about your specific fixture.
How much does Kohler construction cost in Dallas?
Kohler bathroom work in Dallas runs across these ranges, and a free estimate gives you an exact line-item quote:
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Call (844) 797-4808 for an exact quote. Estimates are free, and you’ll get a number you approve before any work starts.
Book Your Kohler Service in Dallas, TX
If you’ve got a Kohler tub that rocks, a toilet that runs, or a shower valve with no access panel, call Groundwork Construction Co. of Dallas at (844) 797-4808. A live person answers around the clock. You’ll get a free estimate, upfront pricing, and work covered by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Dallas.