Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose PGT Construction
Groundwork Construction Co. of Dallas provides independent PGT construction, repair, and replacement service across the Dallas area, working on WinGuard impact windows, Architectural Series wood-clad units, Designer Series vinyl, and PGT aluminum products every week. What sets our PGT work apart is that we diagnose the actual failure first, source OEM-compatible parts where they exist, and tell you honestly when a repair will hold and when it won’t. We’re an independent contractor, not affiliated with or authorized by PGT, so our recommendations come from what your home needs rather than a brand playbook. Call (844) 797-4808 to schedule a free estimate.

Why Trust Groundwork Construction Co. of Dallas for Your PGT Construction?
Our technicians have up to 12 years of experience, and a good share of that time has been spent on PGT products specifically. That matters because PGT’s product families behave differently: a WinGuard impact unit has a laminated glass build-up that a Designer Series vinyl single-hung doesn’t, and the hardware and glazing systems aren’t interchangeable. When we take on a PGT job in Dallas, the technician knows which series they’re looking at before they order a single part.
We work warranty-safe. That means we don’t drill through frames in ways that void coverage, we don’t substitute hardware that changes how a sash seats, and when a PGT unit is still inside its manufacturer warranty window we tell you so before any work begins. We source OEM PGT replacement parts whenever they’re available – rollers, weatherstripping, glazing beads, sash hardware – so fit and function stay true to the original design. For obsolete or discontinued components, we move to quality aftermarket equivalents that meet or exceed original specs, and we say plainly which one you’re getting. Every project carries our 730-Day Done Right Promise, so if something we touched fails, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Dallas
These are the failures we see most often on PGT products in North Texas. Each one has a real cause, and naming the cause is the difference between a fix that lasts and one that comes back.
- Failed dual-pane seals on WinGuard and Designer units. Fogging or condensation between the glass after years of thermal cycling is a breached seal, not dirt you can clean off. Dallas summers push units through thousands of heat-cool cycles, and once the seal breaks, moisture gets in and the unit hazes permanently.
- Delaminated impact glass on WinGuard windows. South- and west-facing elevations take the worst of Dallas sun, and the laminate or edge seal on impact glass can fail there first. You may notice a milky edge or a bubble before the glass ever cracks.
- Weatherstripping and sweep deterioration on sliding glass doors. PGT sliders lose their seal as the sweep wears, which shows up as water infiltration at the threshold and air leaks you can feel by hand. Dallas wind-driven spring storms find that gap fast.
- Corroded or binding rollers and hinges on aluminum and vinyl sliders. Heat and occasional hail take a toll on roller assemblies and hinge hardware, and a door that grinds or jumps its track is usually a worn roller, not a bad door.
- Structural distortion and repeat seal failure across multiple units. When several PGT units on the same elevation fog or stick, the problem is often broader than the glass – and that’s when replacement beats repair on value.
PGT Parts & Our Repair-vs-Replace Approach
We source OEM PGT parts for rollers, weatherstripping, glazing beads, and sash hardware whenever they’re available, because original components preserve the fit and function the unit was engineered around. We don’t claim to stock PGT parts locally; each part is sourced for the specific job after we’ve measured and identified the unit, which avoids the guesswork of trying to match a discontinued profile off a shelf. For obsolete or discontinued parts, we use quality aftermarket equivalents that meet or exceed original specs and tell you exactly what’s going in.
The repair-or-replace call is where honesty pays you back. If frame or glass damage is isolated to one unit, repair is usually the right answer and the cheaper one. But when multiple units show seal failure or structural distortion, full replacement almost always delivers better long-term value than chasing failures one at a time. Call (844) 797-4808 and we’ll give you a straight read on which side of that line your PGT windows and doors fall on.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the exact PGT series – WinGuard, Architectural, Designer, or Aluminum – because the repair path and parts list depend on it. Then we confirm the failure: seal breach, laminate delamination, worn roller, or failed sweep.
- 2
Repair or install. For repair, we order the OEM-compatible part or the OEM replacement insulated glass unit and sash, then reset and reseal it to restore clarity and performance. For installation, we set and flash the new unit to the manufacturer’s spec and to DFW wind-uplift code.
- 3
Test. We operate every sash and slider, check the seal and sweep by hand, and confirm water sheds the way it should before we call it done.
- 4
Back it in writing. Every PGT job we complete is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Dallas
We service and install across the PGT lines Dallas homeowners actually have on their homes. The WinGuard Impact-Resistant Series is our most common service call, and it’s where impact-rated glazing and heavy frames need a careful hand. The Architectural Series – custom aluminum-clad wood – shows up in higher-end remodels where the frame detail and finish matter as much as the glass. The Designer Series vinyl covers a huge share of the tract and infill homes across Dallas, and PGT Aluminum Series units round it out on garages, porches, and additions. We handle window replacement, impact window installation, and storm-related roof repair alongside the PGT work.
We Also Service These Brands
PGT is one line in a much wider capability. We also work on KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, so a remodel that touches windows, doors, kitchen, and bath can run through one contractor instead of three. That’s the full-scope advantage – from foundation to finish line, with a single point of accountability.
FAQs – PGT Construction Service in Dallas
No. We’re an independent contractor and are not affiliated with or authorized by PGT. We work on PGT products because we know them well, not because PGT endorses us. That independence is actually useful: our recommendations come from what your home needs. Call (844) 797-4808 for a free estimate.
Yes, whenever OEM PGT parts are available. We source OEM rollers, weatherstripping, glazing beads, and sash hardware for each job after we’ve identified the unit. For obsolete or discontinued components, we use quality aftermarket equivalents that meet or exceed original specs and tell you which one you’re getting.
Most isolated PGT repairs – a single foggy unit, a binding roller, a worn sweep – are completed in a single visit once the correct part is on hand. Replacement of an insulated glass unit or sash usually requires ordering the OEM part first, which adds lead time. Call (844) 797-4808 and we’ll give you a realistic timeline for your specific units.
We cover the WinGuard Impact-Resistant Series, Architectural Series (custom aluminum-clad wood), Designer Series (vinyl), and PGT Aluminum Series. Because each series has different glass build-ups and hardware, we identify the series before ordering parts or recommending a repair path.
Not if it’s done right. We work warranty-safe by avoiding frame modifications that void coverage and by using OEM-compatible hardware that keeps the unit seating and operating as designed. If a unit is still inside its manufacturer warranty window, we tell you before any work begins so you can decide. Call (844) 797-4808 to talk through your situation.
Cost depends on the service, the series, and whether you’re repairing or replacing. Typical Dallas ranges:
| Service | Typical Range |
|---|---|
| Window Replacement (per unit) | $4,500 – $15,000 |
| Impact Window Installation (whole-home or large project) | $8,000 – $25,000 |
| Roof Repair (storm-related, minor) | $400 – $1,800 |
Call (844) 797-4808 for an exact quote – estimates are free, and the number you see is the number you pay.
Book Your PGT Service in Dallas, TX
If your PGT windows are fogging, your slider is grinding, or you’re weighing a full replacement, Groundwork Construction Co. of Dallas will give you a straight diagnosis and an honest repair-or-replace recommendation. Calls are answered by a live person 24/7, and every project carries our 730-Day Done Right Promise along with upfront pricing and 0% financing for 18 months. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Dallas.