Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Therma-Tru Construction
Groundwork Construction Co. of Dallas provides independent Therma-Tru construction, repair and installation service across the Dallas area – we work on Fiber-Classic, Smooth-Star, Classic Craft and Therma-Tru patio door systems regularly, and we’re not authorized, sponsored or endorsed by Therma-Tru. What sets our Therma-Tru work apart is component-level familiarity: we know how these slabs, frames, sills and multi-point locks behave in Dallas heat, and we fix the cause instead of selling a door you don’t need. Call (844) 797-4808 to schedule a free estimate.

Why Trust Groundwork Construction Co. of Dallas for Your Therma-Tru Construction?
Most remodelers hang a door and move on. We spend real time inside Therma-Tru systems: hinge sets, sweeps, thresholds, brickmold, strike plates and locking hardware. Our technicians have up to 12 years of experience, and they’ve learned which parts on a Fiber-Classic or Smooth-Star entry actually wear out first and which failures are installation problems wearing a product’s name.
We’re careful about warranty. Where a Therma-Tru frame and slab are sound, we source OEM-compatible hinge sets, sweeps, sills and thresholds so the repair stays consistent with the door’s original build. We check plumb, reveal and lock alignment before we touch a screw, and we won’t void a manufacturer warranty by cutting, drilling or refitting in ways that break the door’s original sealing. Every job is covered by our 730-Day Done Right Promise, and our technicians are background-checked and arrive in uniform. This is targeted work, not general handyman service.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Dallas
These are the Therma-Tru issues we see most on Dallas homes, named by line so you know what you’re looking at:
- Fiberglass finish hazing and gel-coat cracking on Fiber-Classic and Smooth-Star doors. Dallas UV and thermal cycling beat on a factory finish that was never touched up. You’ll see dull patches, fine crazing, or a chalky haze on the sun-facing slab. It’s cosmetic until moisture works into the cracks, which is when it stops being cosmetic.
- Threshold and sweep water intrusion on Therma-Tru entry systems. A worn sweep or mis-set threshold lets driven rain in at the sill. On a Dallas slab home that shows up as rotted jamb legs and stained flooring near the door long before anyone notices the seal failed. Hail-driven spring storms push water sideways, not just down.
- Multi-point and deadbolt hardware binding on Therma-Tru patio doors. The lock handle fights you because the door has moved, not because the lock is bad. Seasonal frame movement and settling throw the strike out of alignment, so the points won’t engage smoothly. Forcing it bends the linkage.
- Sagging or rubbing slabs on larger Therma-Tru entry doors with sidelites. A hinge or frame out of plumb makes a heavier slab drag at the head or strike side. The door won’t sit flush, and the wear compounds the longer it’s ignored.
- Slab telegraphing a poorly fitted frame. If the rough opening was off, the slab shows it as uneven gaps, a bowed reveal, or a door that scrapes one season and clears the next. Getting the frame right is the fix; a new slab in a crooked frame repeats the problem.
Why this matters on Dallas clay
Dallas sits on the Blackland Prairie, and the expansive clay under it swells and shrinks with every wet-dry cycle. Door frames move here in ways they don’t on limestone or sand. That’s why a door that latched perfectly in a wet spring can drag by August, and why foundation-and-frame movement shows up first at your doors and windows as sticking hardware and uneven reveals. A typical Therma-Tru door call is a Fiber-Classic or Smooth-Star entry that drags at the strike side and no longer latches cleanly, often because a hinge has worn or the frame shifted with seasonal movement. After checking plumb and lock alignment, a qualified local pro typically resets or replaces the hinge set and strike, adjusts the frame, and re-seals the threshold rather than selling a new door when the slab is still sound.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Parts matter, but judgment matters more. We don’t claim to stock Therma-Tru parts locally – they’re sourced per job to fit your specific line and hardware series. Here’s how we choose:
- Repair is honest when the slab is flat and sound, the glass is intact, the frame has no rot, and the lock hardware can be realigned or replaced with the right parts.
- Replacement is honest when the slab is warped, the glass unit has failed, or the jamb has rot or damage that a patch won’t fix durably.
- OEM-compatible parts for hinge sets, sweeps, thresholds, brickmold and locking hardware keep a sound door consistent with its original build.
- We say so plainly when replacement is the better long-run call. We won’t upsell a door when a hinge set and a re-seal solve it.
Call (844) 797-4808 for a free estimate – we’ll diagnose honestly and quote upfront.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check plumb, reveal, hinge condition, sweep and threshold, lock engagement and glass. We test the door through its full swing and note where it drags or won’t seat.
- 2
Repair or install. We reset the frame, replace hinge sets, sweeps, thresholds and strikes, adjust lock alignment, and re-seal the sill. For new installs, we set the rough opening square and flash the sill correctly before hanging the slab.
- 3
Test. We open and close the door, check the latch and multi-point hardware, confirm the sweep seals against the threshold, and verify no light or water path remains.
- 4
Warranty. Every job is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Dallas
We cover the Therma-Tru lines Dallas homeowners actually have:
- Fiber-Classic, Fiber-Classic Smooth and Fiber-Classic Contour entry doors
- Smooth-Star fiberglass entry doors
- Classic Craft and Rustic Craft entry doors
- Therma-Tru patio and French door systems, including Tru-Defense and multi-point locking patio doors
- Interior door systems, sidelites, hardware, thresholds and sweeps
Full-scope work doesn’t stop at the door: we also handle full kitchen remodeling, full bathroom remodeling, and roof replacement and installation, so an entry replacement or patio door upgrade can be integrated cleanly with the rest of your project.
We Also Service These Brands
We’re multi-brand by design. Alongside Therma-Tru doors, we specify and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures – verified partners across the trades so your project is coordinated through one contractor. That breadth is why homeowners trust us from foundation to finish line, not just on the front door.
FAQs – Therma-Tru Construction Service in Dallas
No. We’re an independent Therma-Tru service provider and we’re not authorized, sponsored or endorsed by Therma-Tru. We work on their doors because we know the products well, and we fit and finish them to the same standard you expect from the rest of your remodel.
We source OEM-compatible Therma-Tru parts – hinge sets, sweeps, thresholds, brickmold and locking hardware – and they’re ordered per job to fit your specific line and hardware. We don’t claim to stock them locally, so we confirm the right part before work starts and give you the number upfront.
Most hinge, sweep, threshold and lock-alignment jobs are completed in a single visit. A new entry install or a frame reset that’s out of plumb takes longer, so we give you a clear timeline with your written line-item quote – no vague “we’ll see when we start” answers.
We service Fiber-Classic, Fiber-Classic Smooth and Fiber-Classic Contour, Smooth-Star, Classic Craft and Rustic Craft, plus Therma-Tru patio and French door systems including Tru-Defense and multi-point locking patio doors. If you’re unsure what you have, our techs identify the line on the estimate.
Not when repair is done correctly. We check plumb, reveal and lock alignment before touching anything, and we avoid cuts and refits that break the door’s original sealing. When we do replace parts, we use OEM-compatible components. Our 730-Day Done Right Promise backs our own workmanship on top of that.
Therma-Tru repairs typically fall in the same range as our door and window service, while larger projects follow standard Dallas market pricing (see the table below). Call (844) 797-4808 for an exact quote – estimates are free.
Usually not. Gel-coat cracking or hazing on a Fiber-Classic or Smooth-Star slab is often cosmetic and can be addressed with proper prep, refinishing and re-sealing, provided moisture hasn’t reached the substrate. If the slab is warped or the glass has failed, replacement becomes the honest call. Call (844) 797-4808 for a free diagnosis – we’ll tell you which it is.
It’s usually frame movement, not a bad lock. Seasonal door-frame movement and settling throw the strike out of alignment so the points won’t engage smoothly, which is common in Dallas on the clay. Forcing the handle bends the internal linkage. We realign the strike and check plumb before replacing hardware. Call (844) 797-4808 for an exact quote on the fix.
Yes, mainly the UV-facing finish. Dallas summers and hard freezes cycle the slab and frame, and paint/finish that’s never touched up accelerates hazing and crazing. A periodic check of the finish, sweep and threshold keeps the door sealed and looking right far longer. Call (844) 797-4808 to schedule an inspection and free estimate.
Yes, when the rough opening is square and the trim is intact. We measure the opening, note the existing brickmold and reveal, and specify a door and hardware that align cleanly with your trim. If the frame is off, we square it first so the new door doesn’t repeat the old door’s drag. Call (844) 797-4808 for a free estimate and design consult.
Repair when the slab is sound, the glass is intact, the frame has no rot, and a hinge, sweep, threshold or lock realignment fixes the cause. Replace when the slab is warped, the glass has failed, or the jamb has rot a patch won’t fix durably. Call (844) 797-4808 and we’ll give you the honest answer with upfront pricing – no change orders.
Here are standard Dallas market ranges for the projects we handle alongside door service. Pricing is upfront – the number you see is the number you pay:
| Project | Dallas Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
We also offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (844) 797-4808 for an exact quote – estimates are free.
Book Your Therma-Tru Service in Dallas, TX
Whether it’s a dragging Fiber-Classic entry, a binding Therma-Tru patio lock, or a full replacement, our Dallas team diagnoses the cause and quotes upfront. Calls are answered by a live person, 24/7, and every job is backed by our 730-Day Done Right Promise. Call (844) 797-4808 for your free estimate in Dallas.
Written by the team at Groundwork Construction Co.