Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Unilock Construction
We provide independent Unilock construction service in Dallas – paver patios, driveways, retaining walls and permeable units – with base prep, joint-sand selection and edge restraint built around how Unilock blocks actually perform in North Texas clay and summer heat. What sets our Unilock work apart is that we treat the base as the job, not an afterthought: we compact in lifts, correct slope for drainage, and set restraint before a single paver goes down.

Dallas sits in the Blackland Prairie clay belt, where expansive vertisols swell and shrink hard with the wet-dry cycle. That soil behavior drives how Unilock systems have to be installed here, and we quote every Dallas project around it.
To be clear about who we are: Groundwork Construction Co. of Dallas is an independent installer. We are not authorized, sponsored or endorsed by Unilock. We set our own methods and back our work with our 730-Day Done Right Promise. Call (844) 797-4808 to talk through your project.
Why Trust Groundwork Construction Co. of Dallas for Your Unilock Construction?
Unilock units aren’t interchangeable. Brussels Block is a tumbled, dimensional paver with a soft-edged profile and a specific thickness; Beacon Hill Flagstone carries a flagstone face with its own bedding tolerances; U-Cara and Pisa wall systems depend on interlock geometry and geogrid placement that have to be respected. Our technicians have up to 12 years of experience and work with these series regularly enough to know how each one handles a Dallas summer and a clay base.
That shapes how we source and fit. We match the exact series and blend rather than substituting a lookalike paver, because a color or thickness mismatch shows immediately on a driveway apron or a patio edge. We install OEM-compatible joint sand and edge restraint, we compact the base in lifts, and we don’t cut corners that a future owner will pay for. Every job is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Upfront pricing means the number you see is the number you pay. Calls are answered by a live person, 24/7. Our technicians are background-checked and arrive in uniform on every Dallas project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Dallas
Most Unilock failures we see in Dallas trace back to the base, drainage or restraint – not to the units themselves. Here are the ones that come up most often.
- Efflorescence bloom on Brussels Block and Beacon Hill Flagstone. White salt haze that keeps coming back after you scrub it. It returns because the unit stays saturated: water is trapped under the pavement from poor drainage or a base that was never compacted in lifts. Cleaning the surface treats the symptom. Fixing the water source is the actual repair.
- Joint sand washout and paver migration. Common on driveways and patios where polymeric sand was swept into joints over a base that was never compacted in lifts. The pavement moves, the sand channels out, and units start to creep. Dallas’s heavy spring rain accelerates it once water is sheeting across instead of draining.
- Edge restraint failure and spalling on the outside course. Shows up on Brussels Block runs where units were cut with a dry saw and the base was left proud at the perimeter. The edge course takes the load, loses support and breaks down. Spalling gets worse every freeze-thaw cycle.
- Retaining wall settlement or bulging (U-Cara and Pisa systems). Usually caused by missing geogrid, bad batter or no drainage gravel behind the wall. In Dallas clay, when that soil takes on water it pushes hard, and a wall without proper reinforcement has nowhere to relieve the load.
- Differential settlement at the house transition. Patios and walkways set against a pier-and-beam or slab foundation in Oak Cliff or East Dallas often drop or lift unevenly as the clay moves, opening a gap at the threshold. The fix is re-grading and re-setting the affected course with proper slope away from the structure, not just caulking the seam.
Unilock Parts & Our Repair-vs-Replace Approach
The right part for a Unilock repair is the same series, not a lookalike. Blend variation and thickness differences between product families show up fast, especially under Dallas sun where color reads clearly across a whole driveway. We source matching Unilock units for the series already on your property, along with OEM-compatible edge restraint and polymeric joint sand. We don’t claim to stock parts locally; units and materials are sourced per job so the match is right.
On repair versus replace, we make an honest call. If the base is salvageable, we re-lay and re-sand the settled area – reset the units, recompact, restore the edge. If the base, the restraint or the wall’s geogrid reinforcement is the actual failure, a patch won’t hold and we’ll tell you that plainly. You’ll get a written assessment with the reasoning, and upfront pricing so you know what each path costs before you decide. Call (844) 797-4808 to schedule a free estimate and design consult.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We walk the pavement, check slope and drainage paths, probe for soft base, inspect edge restraint and, on walls, confirm whether geogrid and drainage gravel are present. We tie what we find back to the specific Unilock series on your property.
- 2
Written scope and pricing. You get a line-item quote covering the actual fix – whether that’s pulling and resetting a course or a full base rebuild. No change orders mid-job unless you approve them.
- 3
Base prep and install. We excavate to depth, grade for water flow away from the house, and compact in lifts. Units are set to the correct blend and pattern, edge restraint is installed, and joints are filled with polymeric sand.
- 4
Walkthrough and clean-up. We check the finished surface, confirm drainage leaves the pavement, and walk the job with you so you know what to expect as the clay moves through the season.
- 5
Warranty. Every job carries our 730-Day Done Right Promise. If it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Dallas
We install and repair Unilock hardscape systems for Dallas homeowners across the series they actually own. That includes Brussels Block and Brussels Dimensional pavers, Beacon Hill Flagstone for patios and walkways, Brussels Fullnose coping and step units, and U-Cara and Pisa retaining wall systems. On permeable work, we handle units designed for water infiltration with the open-graded base they require. Whether it’s a paver driveway, a paver patio or a full driveway replacement, the approach is the same: match the series, build the base for Blackland clay, and get the drainage right.
We Also Service These Brands
Unilock is one part of what we do. We also work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures across our kitchen and bath work – so a Dallas homeowner planning a patio and a kitchen at the same time can keep it with one contractor from foundation to finish line. A multi-brand bench means your project isn’t held hostage to a single product line.
FAQs – Unilock Construction Service in Dallas
Is Groundwork Construction Co. of Dallas authorized by Unilock? No. We are an independent Unilock service provider and are not authorized, sponsored or endorsed by Unilock. We set our own installation methods and back our work with our own 730-Day Done Right Promise. Call (844) 797-4808 if you want the details on how that works.
Do you use genuine Unilock/OEM parts? Yes – we match the existing Unilock series and use OEM-compatible edge restraint and polymeric joint sand. We source matching units per job rather than substituting a lookalike paver, because blend and thickness differences show immediately.
How long does Unilock service take? A repair that involves pulling and resetting a course or two is typically a short job; a full driveway replacement or patio install runs several days depending on square footage and base conditions. We give you a realistic timeline in the written quote, not a guess.
What Unilock models/series do you cover? Brussels Block, Brussels Dimensional, Beacon Hill Flagstone, Brussels Fullnose coping and step units, and U-Cara and Pisa retaining wall systems – plus permeable units with the open-graded base they need.
Will service void my Unilock warranty? Improper installation can affect a manufacturer warranty, which is why we install to the series’ requirements for base, drainage and restraint. We’ll walk you through what our work covers and what the product warranty covers before we start.
How much does Unilock construction cost in Dallas? Here are the market ranges we quote in Dallas:
| Service | Typical Dallas Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Your exact number depends on square footage, series, base conditions and access. Call (844) 797-4808 for an upfront quote – the free estimate and design consult costs you nothing.
Book Your Unilock Service in Dallas, TX
If your Brussels Block driveway is blooming white, your patio joints are washing out, or your U-Cara wall is leaning, get an honest diagnosis before anyone quotes a tear-out. Groundwork Construction Co. of Dallas installs and repairs Unilock systems with base prep built for Blackland clay, upfront pricing and our 730-Day Done Right Promise. Call (844) 797-4808 for your free estimate.
Written by the team at Groundwork Construction Co.