Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Dallas, TX
Vanities, tile, and fixtures are the three surfaces you actually touch every day in a bathroom, and they set the tone for the entire room. A vanity anchors the space, tile handles water and wear, and fixtures control how the room performs for the next 20 years. When any one of these gets dated, cracked, or just plain wrong, the whole bathroom feels off, even if the drywall and plumbing behind it are still solid.
Groundwork Construction Co. of Dallas replaces vanities, re-tiles floors, showers, and backsplashes, and upgrades faucets, showerheads, valves, and lighting throughout the metroplex. We handle this work as a standalone refresh or as part of a larger project, and we keep the same crew and the same 730-Day Done Right Promise on both. If you’re weighing a full overhaul instead, start with our Bathroom Remodeling in Dallas page to see the whole scope. For a straight answer on your specific project, call (844) 797-4808 and we’ll talk it through. A live person picks up, day or night.
We’ve been building in this market since 2014, and bathroom surfaces are one of the most requested upgrades we run. Our technicians bring up to 12 years of hands-on experience to each job. We’ve seen what holds up in North Texas humidity and what fails two summers later, and that shapes what we put in your bathroom.
Key Takeaways
- Vanity, tile, and fixture work runs about $3,000 to $11,000 in Dallas depending on square footage and material grade.
- Most vanity swaps and fixture replacements finish in one day. Tile work takes longer.
- Upfront pricing means the number you see is the number you pay. No mid-project surprises.
- Every project is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right.
When You Need Vanities, Tile & Fixtures
Bathroom surfaces fail in predictable ways, and Dallas homes have their own patterns. Here’s what sends people to call us.
- Your vanity is water-damaged or the wrong size. In older Dallas neighborhoods like Lakewood and the M Streets, we regularly see particleboard vanities that swelled after a slow leak under the sink. By the time the cabinet face bubbles, the subfloor usually has moisture too.
- Tile is cracked, loose, or grouted into oblivion. Hairline cracks in shower floor tile often mean the pan underneath is moving. Regrouting over a failing substrate just works loose again in a year or two.
- You’re fighting mold or mildew that keeps coming back. Dallas summers push indoor humidity high. Tile installed without a proper waterproofing membrane behind it traps moisture, and the grout lines turn black no matter how often you clean.
- Fixtures are dripping, corroded, or the wrong finish. A shower valve that’s 25 years old is one hard freeze from leaking inside the wall. Replacing the valve during a fixture upgrade is a lot cheaper than a drywall repair afterward.
- You’re prepping to sell or rent. A dated bathroom is one of the first things a buyer notices. New tile, a clean vanity, and modern fixtures move a listing faster than almost any other surface upgrade in the house.
- A previous remodel is starting to show its shortcuts. We get called to fix tiled showers built without a liner, vanities hung without proper blocking, and fixtures swapped without matching valve cartridges. Replacing the visible layer is the right time to correct what’s underneath.
Our Vanities, Tile & Fixtures Process
We keep the sequence tight because surface work goes wrong fast when steps get skipped. Here’s how a project runs from the first walkthrough to the final wipe-down.
- Walkthrough and measurements. We measure the vanity opening, tile square footage, and every fixture location. If the walls aren’t square (common in Dallas homes built before 1970), we plan for that now, not mid-install.
- Material and fixture selection. We work through your options for tile, vanities, faucets, and shower trim, with upfront pricing on each. We only install brands we trust to last, and we’ll tell you plainly which finishes hold up in a humid bathroom and which ones don’t.
- Demo and prep. Out come the old vanity, tile, and fixtures. We check the substrate, correct any rot or moisture damage, and set the waterproofing before a single tile goes down.
- Rough-in work. Plumbing and electrical get handled before surfaces close up. New shower valves, vanity faucet positions, and lighting circuits all go in while the walls are open.
- Tile, vanity, and fixture install. Tile gets set with proper spacing and grout, the vanity gets mounted and leveled, and fixtures go on last. We check every connection for leaks and every fixture for smooth operation.
- Final walkthrough. We wipe down, seal grout lines, and walk you through everything we installed. You get the written 730-Day Done Right Promise in hand before we pull out of the driveway.
Most jobs finish on schedule because we order materials before demo starts. When something is backordered, we tell you immediately and offer an in-stock alternative that fits the same price point. You won’t find out a tile is delayed on install day.
Vanities, Tile & Fixtures Pricing in Dallas
Vanities, tile, and fixtures run $3,000 to $11,000 for most Dallas bathroom updates, and the number you see in your estimate is the number you pay. Here’s how that range breaks down.
| Item | Typical Dallas range |
|---|---|
| Vanity replacement (single-sink, standard size) | $900 – $2,400 installed |
| Vanity replacement (double-sink, custom or oversized) | $2,000 – $4,800 installed |
| Floor tile (roughly 50 sq ft bathroom) | $1,200 – $3,400 installed |
| Shower tile and waterproofing (standard walk-in) | $2,200 – $5,500 installed |
| Faucets, showerhead, and other fixture swaps | $400 – $1,500 installed |
| Shower valve replacement (behind the wall) | $600 – $1,400 installed |
| Lighting and exhaust fan upgrade | $350 – $1,100 installed |
What pushes a project toward the top of the range? Tile choice is the biggest lever. Natural stone and large-format porcelain cost more in material and in labor because they need extra substrate prep and a more careful set. Double vanities, moving plumbing to a new wall, and adding a niche or bench inside a shower are the other common cost drivers. Keeping the toilet and plumbing where they are saves real money, because relocating drains is where budgets move.
If you’re staying on the lower end, a clean ceramic or porcelain tile for the floor, a stock vanity, and quality fixtures from established brands get you a bathroom that looks sharp and lasts. You don’t need to spend at the top to do it right. We’ll show you the honest comparison and let you decide.
Every estimate comes with our three standing offers: $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult. We’ll show you how each one applies to your specific project. All projects are covered by the 730-Day Done Right Promise. For an exact quote on your Dallas bathroom, call (844) 797-4808. Free estimates, upfront pricing, no surprises.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity replacement cost in Dallas?
A single-sink vanity replacement runs $900 to $2,400 installed in Dallas, and a double-sink or custom vanity runs $2,000 to $4,800. The price includes removing and disposing of the old cabinet, checking and leveling the floor, and hooking up the faucet and drain. If there’s water damage underneath, we’ll quote that as a separate line item so you can see exactly what it costs. Call (844) 797-4808 for an exact quote. Estimates are free.
Can you fix cracked shower tile without a full remodel?
Usually, yes, but the answer depends on what’s underneath. If a tile is cracked because something dropped on it, we can replace that tile and match the grout. If the grout lines are moving, the waterproofing has failed, and patching won’t hold. In that case, we recommend pulling out the shower tile and building the waterproofing back correctly so it lasts. Call us and we’ll tell you which situation you’re in after a quick look.
How long does fixture and vanity replacement take?
Most fixture swaps and vanity replacements finish in a single day. Tile work is the timing outlier. A floor tile job on a standard Dallas bathroom usually takes one to three days, and a full shower tile job with waterproofing runs three to five days, factoring in the time the waterproofing layer needs before tile goes down. We give you a day-by-day schedule before we start.
Do you do this work as part of a full bathroom remodel?
Yes. Vanities, tile, and fixtures are often the visible upgrade inside a larger Bathroom Remodeling project, and we handle both scopes. If you’re already opening walls or relocating plumbing, the surface work phases in naturally. If you only want to replace the vanity and fixtures and leave everything else, we do that too, and the 730-Day Done Right Promise applies to either job. Call (844) 797-4808 and we’ll scope it with you in a free estimate.
What tile holds up best in a Dallas bathroom?
Porcelain tile holds up best in most Dallas bathrooms because it handles humidity, temperature swings, and daily cleaning without staining or wear issues. It’s the workhorse choice. Natural stone looks beautiful but needs more careful sealing, and the humidity in North Texas means it needs repeat maintenance. Grout choice matters too. We’ll walk you through which grout fits your use and how often it needs attention, so you know up front what maintenance really looks like.
Can I finance my bathroom vanity and tile project?
Yes. We offer 0% financing for 18 months on bathroom projects, and projects over $10,000 qualify for an additional $1,000 off. That makes a larger tile-and-vanity upgrade financially manageable without draining savings. We’ll show you the financing terms in plain language before you commit. For an application and estimate, call (844) 797-4808. A live person answers, and the estimate is free.
Why Groundwork Construction Co. of Dallas
You want a contractor who shows up when promised, prices the job honestly, and stands behind the work. That’s the full scope of what we commit to on every project.
- Upfront pricing, no surprises. The number you see is the number you pay.
- 730-Day Done Right Promise. If it’s not done right, we make it right, in writing.
- Live person, 24/7. Call any hour and a real person picks up. No voicemail, no waiting until Monday.
- Background-checked, uniformed technicians. The people in your home are verified and professional.
- Real brand partners. We install materials from trusted names, including select CGI and CWS tile lines, so quality isn’t a gamble on availability.
If you’re planning a broader update, our home page shows how bathroom surfaces fit into the work we do from foundation to finish line. Most folks who start with a vanity swap end up asking about a full bathroom refresh once they see what’s possible, and we’re glad to scope both on the same visit.
Call (844) 797-4808 for a free estimate on your Dallas vanity, tile, or fixture project. We’ll walk the bathroom, get you a written number, and put a start date on the calendar. The estimate and design consult are free.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas.