A Groundwork company - serving Dallas, TX

Walk-In Shower Installation in Dallas, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Walk-In Shower Installation in Dallas, TX

A walk-in shower installation in Dallas typically runs $4,500 to $14,000 for a full curbless or low-threshold conversion, with most standard tear-out-and-replace jobs landing between $6,000 and $9,500. The number moves with tile choice, drain relocation, glass, and whether we’re cutting into a structural slab. We install walk-in showers as part of our Bathroom Remodeling work across Dallas, and we price them upfront so the number on the estimate is the number on the invoice. Call (844) 797-4808 to set up a free estimate and design consult.

If you’ve spent a week stepping over a 15-inch tub wall and decided enough is enough, you’re in the majority of the calls we take in Dallas. Walk-in showers are the single most requested bathroom change we handle, and for good reason: they age better, clean easier, and turn a cramped 5×8 Dallas bathroom into something that actually feels open. Our technicians have up to 12 years of experience on tile, waterproofing, and glass, and every project carries the 730-Day Done Right Promise. Check our home page for the full picture of what we cover.

Key Takeaways

  • Most Dallas walk-in shower installs fall between $6,000 and $9,500; full curbless conversions with high-end tile go higher.
  • Curbless designs in slab-on-grade Dallas homes usually mean cutting the concrete to recess the drain. We plan that before demolition.
  • We waterproof with a bonded membrane system, not greenboard behind tile, because Dallas humidity and slab moisture punish shortcuts.
  • Upfront pricing and 0% financing for 18 months, plus $1,000 off projects over $10,000, keep a real remodel within reach.
  • Live person, 24/7 on the phone. No voicemail, no waiting until Monday.

When You Need Walk-In Shower Installation

Most homeowners don’t wake up wanting a new shower. Something pushes them. Here’s what we see most in Dallas.

  • The tub is a daily hazard. If someone in the house is recovering from a hip replacement, has balance issues, or is simply getting older, a high tub wall is a fall risk. A low-threshold walk-in with a built-in bench and grab bar placement planned from day one solves it without looking clinical.
  • The existing shower is leaking into the ceiling below. In older Dallas neighborhoods like Lakewood and the M Streets, we regularly find original 1950s mud-bed showers that have been quietly failing for years. The tile looks fine. The pan underneath doesn’t. If you see a soft spot, a hairline crack at the curb, or a water stain on the ceiling of the room below, get it looked at before it becomes a subfloor repair.
  • You’re planning to sell within a few years. A modern walk-in shower in the primary bath is one of the upgrades Dallas buyers actually notice. It photographs well and reads as move-in ready.
  • The tub never gets used. Plenty of Dallas homes have a garden tub in the primary bath that takes up 12 square feet nobody touches. Converting that footprint to a large walk-in with a frameless glass panel is the highest-impact change per dollar in most bathrooms.
  • Tile and grout are past saving. Cracked grout, missing caulk, and a dated 4×4 tile surround. Rather than re-tiling over a failing substrate, we tear out to the studs and rebuild the waterproofing correctly.
  • You want to age in place. Curbless entry, a linear drain, a fold-down bench, and blocking behind the walls for future grab bars. We plan for the next 20 years, not just today.
  • Mold keeps coming back. Dallas summers push indoor humidity high, and a poorly vented or poorly waterproofed shower grows mold season after season. A rebuilt shower with correct vapor management and a real exhaust path fixes the source, not the symptom.

Our Walk-In Shower Installation Process

Every install follows the same sequence, because skipping steps is how showers fail. Here’s how we run it from first call to final walkthrough.

  1. Free estimate and design consult. We walk the bathroom, measure the footprint, check the drain location, and confirm what’s under the floor. In slab-on-grade Dallas homes that usually means we’re planning to cut concrete for a curbless design. You’ll get material options, a written scope, and a real number before we pick up a tool. Upfront pricing, no surprises.
  2. Demolition and inspection. We pull the old tub or shower, the tile, and the backer down to the studs. This is where we find out whether there’s rot in the framing, a slow leak that’s been running behind a wall, or a plumbing drain that needs to move. We show you photos of what we find and any change order in writing before proceeding.
  3. Rough-in and drain work. The drain, valve, and any plumbing changes go in now, before waterproofing. For curbless installs, we recess the slab or build a structural curb ramp, depending on what the floor allows. Licensed plumbing on every change.
  4. Waterproofing. A bonded sheet or liquid membrane over cement backer, with seams and corners reinforced, and a pre-sloped pan. This is the step most cheap installs skip, and it’s the step that determines whether your shower lasts 15 years or 4. We don’t cut corners here and we photograph the membrane before tile goes up.
  5. Tile, glass, and fixtures. Porcelain, ceramic, or natural stone on the walls and floor, with a slip-resistant floor tile underfoot. Glass gets templated after tile is set and installed a week or so later, since Dallas shops need accurate measurements for frameless panels. Kohler and other brand fixtures go in at this stage.
  6. Final walkthrough and punch list. We fill it, run it, check the drain, check the door seal, and walk you through maintenance. Anything you flag goes on the punch list and gets handled. The 730-Day Done Right Promise covers workmanship from that day forward.

One note on the slab work: Dallas is mostly blackland clay soil, and it moves. We’ve seen plenty of homes where a slab crack had already shifted the drain laterally before we showed up, which is why we check the drain pitch and the slab condition during the estimate, not after demolition. It’s a Dallas-specific step that most out-of-town outfits skip.

Walk-In Shower Installation Pricing in Dallas

Here’s honest pricing for what we actually install in Dallas. Ranges reflect real Dallas labor, material, and glass costs as of this year. Your exact number depends on dimensions, tile selection, and whether the drain moves.

What you’re getting Typical range Notes
Tile-over-curb replacement, existing drain $4,500 – $7,000 Simplest path when you keep the existing drain and shower footprint
Standard walk-in with new pan, curb, and framed glass $6,500 – $9,500 Most common scope in Dallas
Frameless glass and premium tile $9,000 – $12,500 Porcelain slab, Euro glass, linear drain
Curbless conversion with slab cutting $10,000 – $14,000+ Requires concrete demolition and drain recessing
Bench, niche, and grab bar blocking $800 – $2,200 add-on Blocking behind tile for future safety rails

What moves the number up or down

  • Drain relocation. Moving the drain to a center or linear location on a slab means concrete cutting and re-piping. That’s a real add: usually $1,200 to $3,000.
  • Tile. Standard porcelain runs roughly $4 to $10 per square foot in material. Natural stone and large-format porcelain slabs run $15 to $40 per square foot plus more labor, because slabs are heavier and less forgiving.
  • Glass. Framed glass is budget-friendly. Frameless ⅜-inch or ½-inch tempered panels with a single hinge mount are the premium option and run $800 to $2,400 depending on size and configuration. Dallas glass shops quote 2-3 weeks out, so we template after tile is complete.
  • Plumbing surprises. Galvanized supply lines, corroded drain fittings, or a hidden leak that’s rotted framing. We show you the photos before we quote the fix.
  • Layout. A walk-in that keeps the original tub footprint is cheaper than one that moves walls to gain 18 inches. We tell you honestly when the layout is worth changing and when it isn’t.

Every walk-in shower we install is covered by the 730-Day Done Right Promise. Every project over $10,000 gets $1,000 off, and we offer 0% financing for 18 months so you can spread a real remodel over time without a credit card rate. The estimate and design consult are free. If you want a real number for your Dallas bathroom, call (844) 797-4808.

Waterproofing: The Part Nobody Sees and Everyone Pays For

Every failed shower we’ve torn out in Dallas failed for the same reason: the waterproofing wasn’t done right. Tile and grout are not waterproof. They’re a decorative wear surface over a membrane, and if that membrane has pinholes at the corners, a poorly sloped pan, or a curb built from drywall instead of cement board, water is going through it every time someone showers. The failure takes 18 months to show up as a ceiling stain and about 6 years to show up as a rotted subfloor. That’s the window where cheap installs look fine and expensive installs keep looking fine.

We use a bonded membrane system with a pre-sloped pan, reinforced seams and corners, and a flood test before tile goes down. You get photos of the membrane before the tile goes up, and those photos go into the project file. The 730-Day Done Right Promise backs the work, and if there’s ever an issue, we make it right. Built to last, backed in writing.

Design Choices That Actually Matter in Dallas

Dallas has a few design realities that other markets don’t. Blackland clay soil moves, and small seasonal shifts in the slab can open hairline cracks that make frameless glass panels bind against each other. We install slightly more forgiving glass mounts on slab homes to compensate. Dallas summers also push indoor humidity to 70% or more, so we build in a proper exhaust path and pick tile with a slip resistance rating (DCOF) that holds up when the floor is wet. A 12×24 matte porcelain with a DCOF above 0.42 is what we recommend for most Dallas installs.

Size matters too. Most Dallas walk-in showers come in at 36×60, but if you’re converting a garden tub footprint you can usually go wider. A 48×60 walk-in with a bench and a niche is the sweet spot for a usable, open floor plan. We walk you through layout options at the design consult, and we’re honest about which options add real value and which are just premium-price upsells.

Why Groundwork Construction Co. of Dallas

We’re a full-scope construction company that’s been in business since 2014, and we handle the whole project from demolition through final glass install. That means one contractor, one schedule, one point of contact, and no finger-pointing between the plumber, tile setter, and glass guy when something needs to be fixed. From foundation to finish line.

Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked. Calls are answered by a live person 24/7, so if you have a question on a Tuesday night or a leak on a Sunday morning, someone picks up. We use a curated set of verified brand partners across trades, including Kohler for fixtures and top-tier tile brands, so you’re choosing quality materials, not whatever’s on the truck. Every project is priced upfront, with no change order surprises once work begins. And every install is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space.

Areas We Serve in and Around Dallas

We install walk-in showers across Dallas and the neighboring communities, including Highland Park, University Park, Lakewood, the M Streets, Preston Hollow, Oak Cliff, Uptown, and the Park Cities. If you’re outside Dallas proper, we likely cover you through our adjacent markets. See our Bathroom Remodeling in Dallas page for the full city service area and related bathroom projects.

FAQs – Walk-In Shower Installation

How much does walk-in shower installation cost in Dallas?

Walk-in shower installation in Dallas typically costs between $4,500 and $14,000, with most standard installs landing in the $6,500 to $9,500 range. The biggest cost drivers are whether the drain moves, whether the floor is slab and needs to be cut for a curbless design, tile selection, and glass. Call (844) 797-4808 for a free estimate – we price upfront, and the number on the estimate is the number on the invoice.

How long does a walk-in shower installation take?

A standard walk-in shower install takes 7 to 10 working days once demolition starts, with about 3 to 4 of those days spent on tile and waterproofing and the rest on demolition, rough-in, and glass. Glass is templated after tile is done and takes 5 to 10 business days to come back from the Dallas fabricator, so the total elapsed time is usually 2 to 3 weeks from demo to final walkthrough. We schedule exactly that timeline before we start, so you know what to expect.

Is a walk-in shower cheaper than a walk-in tub or a tub-to-shower conversion?

Typically yes, by several thousand dollars. A walk-in shower install in Dallas usually runs $6,500 to $9,500 for a standard scope, while a walk-in tub usually lands higher because the tub unit itself is more expensive and requires electrical work for jets and a heater. A tub-to-shower conversion can be cheaper than either if the plumbing drain and valve stay where they are, because you skip moving plumbing. Call (844) 797-4808 for a comparison estimate based on your actual bathroom layout.

Can you install a walk-in shower in a single day?

No, and any company promising a single-day walk-in shower install in Dallas is skipping steps. Demolition and rough-in alone take a day, and waterproofing needs to cure before tile goes up. Tile setting and grouting are another 2-3 days, and glass needs to be templated and fabricated after tile is complete. A real walk-in shower install takes 7 to 10 working days of actual work. Call (844) 797-4808 and we’ll walk you through the exact timeline for your bathroom.

Do I need a permit for a walk-in shower installation in Dallas?

Yes, if you’re moving the drain, changing the plumbing, or adding electrical (like a heated floor or a lighted niche), the City of Dallas requires a permit and inspection. A cosmetic replacement that keeps plumbing and electrical in their existing locations usually does not. We pull the permit when it’s required and handle the inspection schedule. Call (844) 797-4808 and we’ll tell you exactly what your project needs.

What tile should I choose for a walk-in shower in Dallas?

A matte porcelain or ceramic tile with a wet slip resistance (DCOF) rating above 0.42 is the safe pick for a Dallas walk-in shower floor. Large-format 12×24 wall tile is popular and easy to clean, and a smaller format underfoot gives you better grip. Natural stone works but needs sealing every 1-2 years given Dallas humidity. We’ll walk you through the options at the design consult, and we only install materials we’re confident will hold up.

Ready to Talk Through Your Walk-In Shower?

If you’re thinking about a walk-in shower in Dallas, the best next step is a free estimate and design consult. We’ll walk the bathroom, talk through layout options, and give you a real number in writing. No pressure, no vague ranges, no phone tag. Call (844) 797-4808 today and we’ll get you on the schedule. Live person, 24/7. Upfront pricing, no surprises. And every install covered by the 730-Day Done Right Promise.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas.

Need Construction help in Dallas? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch