Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBathtub Replacement in Dallas, TX
Bathtub replacement in Dallas typically costs $1,800 to $6,500, depending on whether you’re swapping a standard alcove tub for a like-size model or converting to a walk-in, freestanding, or jetted design. Most straight swaps are finished in one to three days, while a tub-to-shower conversion or a layout change runs a week or longer once tile, plumbing, and waterproofing are complete. We handle the whole job under one roof: removal, rough plumbing, waterproofing, surround tile, and disposal, all backed by our 730-Day Done Right Promise.
Dallas homes keep their original tubs a long time, and it shows. A lot of the housing stock in East Dallas, Oak Cliff, and the older blocks of Lakewood went up between the 1940s and 1970s, which means cast-iron tubs that have been reglazed twice and drain lines that may be clay, cast iron, or early PVC. When a tub starts to flex underfoot or the finish won’t hold after a reglaze, replacement is the honest answer. That’s the work we do day in and day out as part of our Bathroom Remodeling service, and it’s the kind of job where a straight answer about what’s behind the wall matters more than a slick sales pitch.
Call (844) 797-4808 and a live person picks up, any hour, any day. No voicemail. No waiting until Monday morning for a callback that may or may not come.
When You Need Bathtub Replacement
Tubs rarely fail all at once. Most give you warning signs for months or years before they become a problem. Here’s what we see most often in Dallas bathrooms:
- Visible cracks, chips, or a finish peeling in sheets. Once the porcelain or acrylic coating breaks down, water gets underneath and the surface keeps failing no matter how many times it’s refinished. Reglazing buys a year or two at best.
- A tub that flexes or creaks when you step in. That usually means the subfloor or the tub’s support base has given way. In Dallas’s older pier-and-beam homes, we’ve opened floors to find rotted joists under a tub that looked fine from above.
- Rust stains or a persistent slow leak at the drain. A drip you can ignore for months can rot the framing around the tub apron. By the time the ceiling below shows a stain, the damage is already in the wall.
- Recurring mold or mildew at the caulk line that won’t stay clean. If you’ve re-caulked three times and it comes back in weeks, moisture is getting behind the surround, not just sitting on top of it.
- An aging or unsafe tub for the people using it. Stepping over a 17-inch tub wall gets harder with age or a knee injury. A low-threshold walk-in or a curbless shower solves a real safety issue, not a cosmetic one.
- You’re remodeling the bathroom anyway. If you’re already replacing tile, the vanity, or the floor, pulling the tub now saves you from tearing up a new bathroom in two years.
If you’re seeing any of these, a free on-site estimate will tell you whether repair or replacement is the smarter money. We don’t push replacement when a repair holds.
Our Bathtub Replacement Process
Every job follows the same structure, from the first call to the final walkthrough. Here’s how a typical Dallas bathtub replacement runs:
- Free estimate and design consult. We walk the bathroom, measure the alcove, check the drain and supply lines, and talk through tub types and materials. You get a written upfront price before any work starts. The number you see is the number you pay.
- Protect the space and demo. On install day, our uniformed, background-checked technicians lay floor protection and mask off the rest of the house. The old tub and surround come out, and we haul the debris away the same day.
- Inspect what was hiding. With the tub gone, we check the subfloor, joists, studs, and the valve and drain connections. This is where older Dallas homes surprise people, and we show you photos of anything we find before we touch it.
- Rough plumbing and waterproofing. We set the new drain and overflow, adjust the supply lines, and install the waterproofing membrane behind the surround. Skipping or rushing this step is the single biggest reason bathrooms leak later.
- Set the tub and finish the surround. The new tub goes in level and secure, then tile, surround panels, trim, and fixtures go up. Subfloor repairs happen before any of this, not after.
- Final walkthrough and cleanup. We test everything, clean up, and walk you through the finished job. Then the 730-Day Done Right Promise kicks in: if anything isn’t right, we come back and make it right.
Most straight swaps finish in one to three days. A tub-to-shower conversion with new tile and a layout change takes longer, and we’ll give you the real timeline in the estimate rather than telling you what you want to hear.
Bathtub Replacement Pricing in Dallas
Bathtub replacement in Dallas runs $1,800 to $6,500 for most jobs. The low end is a straight swap of a standard alcove tub with a basic surround. The high end covers a walk-in or freestanding tub, new tile surround, and plumbing adjustments. Here’s a line-item breakdown so you can see where the money goes:
- Tub removal and haul-away: $200 to $500. Cast-iron tubs are heavy and take more labor than acrylic.
- New alcove tub (standard acrylic or fiberglass): $400 to $1,200 for the tub itself.
- Walk-in tub: $3,000 to $8,000 installed, depending on features like jets, heated seats, and a quick-drain system.
- Freestanding or soaking tub: $800 to $3,000 for the tub, plus plumbing and floor reinforcement where needed.
- Tile surround or panel surround: $600 to $2,500, based on material and square footage.
- Drain and valve work: $250 to $900. Older Dallas homes sometimes need a drain line or supply line reworked to fit a new tub.
- Subfloor or framing repair (if found): $300 to $1,500, quoted after demo once we can see the actual damage.
What drives cost up: converting to a walk-in or freestanding tub, moving the drain, opening walls to fix rot or old plumbing, and choosing natural stone or large-format tile. What keeps it down: staying with the same tub footprint and choosing a quality acrylic tub over a specialty model.
We pair upfront pricing with 0% financing for 18 months and $1,000 off projects over $10,000, so a larger bathroom overhaul stays within reach. If your tub replacement is part of a bigger remodel, read our home services overview to see how we handle a full-scope project from foundation to finish line.
Every estimate is free, in writing, and has no surprises on the back end. Call (844) 797-4808 to book yours.
FAQs – Bathtub Replacement
How much does bathtub replacement cost in Dallas?
Bathtub replacement in Dallas typically costs $1,800 to $6,500, with a straight alcove swap at the lower end and a walk-in or freestanding tub with new tile at the higher end. Drain and valve work, subfloor repairs, and material choices move the number. Call (844) 797-4808 for an exact quote. Estimates are free and there’s no obligation.
Can you replace just the bathtub without remodeling the whole bathroom?
Yes. A standard tub swap is a standalone job and most run one to three days. If your existing tile surround is in good shape, we can often set a new tub and reuse or refresh the surround. If the tile is failing or the waterproofing is compromised, we’ll tell you honestly, because installing a new tub over bad waterproofing only hides a leak for a year or two. Call us and we’ll walk you through both options.
How long does a bathtub replacement take?
Most bathtub replacements take one to three days. A same-footprint alcove swap is the fast case. A walk-in tub, a freestanding tub with plumbing changes, or a tub-to-shower conversion takes a week or longer, since tile and waterproofing have to cure before use. You’ll get your timeline in the written estimate. Call (844) 797-4808 to schedule a free assessment.
Do I need a permit to replace a bathtub in Dallas?
A straight tub replacement in the same location usually doesn’t need a permit, but moving plumbing, converting a tub to a shower, or changing the drain location often does. Dallas permitting rules vary by the scope of work and the age of the home. We’ll tell you what your specific job requires and handle the paperwork where a permit applies. Call us to talk through your project.
Will you haul away my old tub?
Yes. Removing and hauling away the old tub and surround is part of the job. Cast-iron tubs are heavy, and we break them down safely and dispose of them so you’re not left with a 300-pound problem in the driveway. It’s included in the estimate, not tacked on later.
What’s the difference between reglazing and replacing a tub?
Reglazing recoats the existing surface for $400 to $900 and buys you a year or two if the tub is structurally sound. Replacement is the right call when the tub flexes, the subfloor is soft, or the surface keeps failing. If a quick reglaze will genuinely solve your problem, we’ll say so. We’d rather earn a customer for life than sell a job you don’t need.
Is it cheaper to repair or replace my bathtub?
It depends on what’s failing. A leaky drain or a bad valve can often be repaired for a few hundred dollars. A cracked, flexing, or rusted-through tub is almost always cheaper to replace than to keep patching. Call (844) 797-4808 and we’ll give you an honest repair-vs-replace call after looking at it in person.
What tub materials do you recommend?
For most Dallas homes, a quality acrylic tub is the practical choice: it holds heat, resists chipping, and won’t rust. Cast iron is durable and quiet but heavy, and installation can require floor reinforcement in older homes. When you’re pairing the tub with a full bathroom refresh, we can talk through the material partners we trust across every trade, from fixtures to tile, so you’re choosing quality, not just what’s on the shelf.
Why Dallas Homeowners Choose Groundwork Construction Co.
We’ve been in business since 2014, and our technicians bring up to 12 years of experience to every bathtub replacement. Background-checked, uniformed technicians show up on every job, and we answer the phone 24/7 with a live person, not voicemail. Upfront pricing means the number you see is the number you pay. And the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space, covers the work in writing.
From foundation to finish line, we handle the whole scope of your bathroom project so you’re not juggling a plumber, a tile setter, and a demo crew on your own. If you’re also considering a wider update, our Dallas Bathroom Remodeling in Dallas team can walk you through cabinetry, tile, and layout options alongside your tub replacement.
Get Your Free Bathtub Replacement Estimate
Ready to get that old tub out of your life? Call (844) 797-4808 for a free, no-hassle estimate and design consult. A live person answers around the clock, and we’ll show up on time, in uniform, with a written price before any work starts. Whether you need a simple swap or you’re planning a full Dallas bathroom renovation, we’ll give you a straight answer and back it up in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas.