Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in Irving, TX
We provide independent Delta service across Irving, TX, from mid-century ranch homes in South Irving to the multifamily towers along the SH-114 corridor. What makes our Delta work different here is sequencing: on this city’s clay-soil lots, a valve swap or tub-to-shower conversion often has to wait until foundation correction is settled. We’re an independent Delta service provider, not authorized, sponsored, or endorsed by Delta, so our recommendations follow what the fixture needs. Call (844) 797-4808 for a free estimate.

Why Irving Residents Choose Us for Delta Service
Our technicians have up to 12 years of experience, and they’ve handled Delta Monitor 13/14 valves, Classic kitchen faucets, and Windemere bath trim often enough to know the difference between a cartridge that needs freeing and a valve body that needs replacing. Fixture work is unforgiving of guesswork. A frozen cartridge forced past its stop cracks the body, and then a $40 part turns into a wall-opening job.
Irving homeowners call us for three reasons. We answer the phone with a live person, 24/7, so a leaking shower valve doesn’t wait until Monday. Our pricing is upfront, so the number on the estimate is the number you pay. And every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers the labor behind the trim, not just the parts.
The difference that matters residentially is parts discipline. We source genuine Delta OEM cartridges and match finish codes rather than swapping in generic trim that reads wrong against the tile. Our background-checked, uniformed technicians work across all four Irving ZIPs: 75038, 75062, 75063 and 75037. You can see the full Irving service area for coverage details.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Delta Construction Problems We Solve in Irving
- Seized Monitor 13/14 cartridges. After years on Irving’s hard, mineral-heavy municipal water, the pressure-balance cartridge in a Monitor valve gets stiff and loses hot/cold balance. The handle drags, and the shower runs cold when someone flushes a nearby toilet. A cartridge and seats swap usually fixes it without opening more wall than necessary.
- Dripping spouts on two-handle faucets. Rubber seats, springs and O-rings in older Delta compression and washerless stems degrade over time. We find this constantly in 1950s-1970s South Irving ranches that still have original valves or a valve that was replaced once in the 1980s and never touched again.
- Scaled aerators and cartridge inlets. Kitchen and lavatory flow drops even after an aerator cleaning, especially in homes on older galvanized service lines where sediment breaks loose after main work or a slab repair. The fix starts at the cartridge inlet, not the faucet head.
- Finish failure on shower trim. Powder-coated and PVD escutcheons and tub spouts spot and peel faster in high-use rental and hospitality units near the DFW and Las Colinas corridor, where cleaning chemicals accelerate the breakdown. Matching the replacement finish code to the rest of the room keeps the bathroom looking intentional.
- Valve bodies past repair. A hairline crack in the body, or a 1990s Monitor cartridge that’s no longer produced, ends the patch-repair conversation. Honest valve replacement is usually cheaper long-term than a third callback on the same wall.
Delta Service in Irving: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes almost every Delta job we scope in Irving: much of the South and central Irving housing sits on the region’s expansive black clay, and the 1950s-1970s bath layouts in ZIPs like 75060 and 75061 often hit out-of-level floors or a cracked slab before tile work ever starts. On those lots, the original homes were built on shallow footings suited to the clay, so what looks like a simple valve swap can stall while the floor gets evaluated. For Delta owners, that means a tub-to-shower conversion or a Monitor cartridge replacement has to be sequenced around foundation correction, not started first. Set the new valve and trim before the slab is settled, and the tile plane won’t stay true. Meanwhile, the Las Colinas and Valley Ranch edge of the city (75038, 75039, 75063) brings multifamily and hospitality towers with shared-riser plumbing, where the failure pattern and shutoff access are a different problem entirely. Few suburbs have that much vertical commercial work a few miles from postwar slab-on-grade houses, and it changes the approach on both sides of the corridor.
In a typical Irving bath remodel, the existing Delta Monitor valve is decades old, the cartridge is frozen in the body and the escutcheon is caulked over failing drywall. A qualified local pro opens the wall, frees or replaces the valve, checks the slab and framing for the movement common on clay soils, then installs a new pressure-balance cartridge and trim before setting tile so the finish line stays true. The same sequence applies in Las Colinas multifamily units served from a shared riser, where the pro confirms shutoff access before touching the valve.
Delta Models & Products We Service in Irving
We work on Delta Monitor 13 and 14 series tub-and-shower valves with the single-handle cartridge, the family that shows up most often in Irving’s mid-century bath layouts. On the faucet side, we service Classic and Foundations single-handle kitchen and lavatory faucets, plus the Everly, Porter and Windemere widespread and centerset bath collections. Shower heads include the In2ition and HydroRain two-in-one models, where the handheld and fixed head share a diverter that can seize with scale.
Parts are sourced per job to match the specific valve or finish code. We don’t claim local stock and we won’t tell you a part is on a shelf when it’s ordered. Our approach is genuine Delta OEM cartridges, seats, springs and trim whenever the valve body is sound, with reputable aftermarket considered only for discontinued or budget-limited cases where you understand the tradeoff.
Groundwork’s Delta service covers the full fixture set across the trades, and the brand partnerships behind our remodel work include KraftMaid, Kohler, GAF and Andersen, so a bathroom project can move from valve repair into cabinetry, counters and finish without a second contractor.

See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in Irving
What drives cost is access and scope. A cartridge-only repair is minor; a valve replacement inside a finished wall, a floor that needs leveling, or a full shower rebuild moves into remodel territory. These ranges reflect the Dallas market, Irving included.
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate includes a fixture inspection, a finish-code match, and a written line-item scope. No open-ended allowances. Projects over $10,000 carry $1,000 off, and we offer 0% financing for 18 months on approved terms. Call (844) 797-4808 for an exact quote; estimates are free.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Delta Construction in Irving
Usually yes. That combination points to a failing pressure-balance cartridge, not a failed valve body, and swapping the cartridge and seats restores hot/cold balance without opening more wall than the access requires. If the body itself is cracked, replacement is the honest call. Call (844) 797-4808 to get it looked at; estimates are free.
They can. On the older South and central Irving lots, expansive black clay moves with the wet-dry cycle, and out-of-level floors or a cracked slab often surface once the old tub comes out. We check the floor and framing before setting the new valve and tile, so the finish plane stays true.
In most cases, yes. Seats, springs and O-rings for older two-handle compression and washerless stems are still available as OEM, and a dripping spout is usually a seat-and-spring job rather than a faucet replacement. If the stem is discontinued, we’ll tell you plainly and price the alternatives.
The restriction is usually upstream at the cartridge inlet, where scale and sediment collect, and older galvanized service lines in Irving homes can shed debris after main work or a slab repair. Cleaning the aerator only addresses the last inch of the problem. Call (844) 797-4808 for an exact quote on the inlet and cartridge service.
Often yes, because conversions typically touch plumbing rough-in and sometimes framing, and Irving requires permits for that work. We pull the permits and schedule the inspections as part of the scope, so the finished shower passes without a surprise at resale. Estimates are free if you want the requirements checked for your address.
Service Areas Near Irving
Delta fixture work runs beyond the Irving city limits. We cover Dallas and the Park Cities neighbors of Highland Park and University Park, plus Addison. Two nearby towns with their own page depth are Farmers Branch and Coppell, both a short drive from the SH-114 corridor and built on the same clay-and-hard-water footing as Irving.
Book Your Delta Service in Irving Today
If a Delta valve is stiff, a spout drips, or you’re planning a tub-to-shower conversion in Irving, call (844) 797-4808. Calls are answered by a live person, 24/7. We’ll inspect the fixture, quote it upfront, and back the work with our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.