A Groundwork company - serving Dallas, TX

Metal Roofing in Dallas, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Metal Roofing in Dallas, TX

Metal roofing in Dallas costs roughly $9,500 to $28,000 for most homes, installed, depending on square footage, panel type, and how much deck repair the old roof needs. It’s the roof type that handles North Texas heat and hail better than almost anything else on the market, and it’s typically the last roof a homeowner in Dallas buys for the house. We install standing seam and exposed-fastener metal systems across Dallas with upfront pricing and the 730-Day Done Right Promise behind the workmanship.

Metal is a different trade than asphalt shingles. Expansion and contraction, fastener placement, panel gauge, and flashing detail all decide whether a metal roof lasts 50 years or starts leaking in three. Our technicians have up to 12 years of experience with metal systems specifically, and we walk every homeowner through what their house actually needs before a single panel gets ordered. Call (844) 797-4808 for a free estimate, and take a look at our full Roofing services if you’re still deciding between materials.

Key Takeaways

  • Metal roofing in Dallas runs about $9,500 to $28,000 installed, with standing seam at the top of that range.
  • Metal reflects radiant heat, which matters in a city that hits 100°F+ for weeks each summer.
  • Hail is the big Dallas test. Panel gauge and fastener type decide how a metal roof handles it.
  • Our work is covered by the 730-Day Done Right Promise, and pricing is upfront with no surprises.

When You Need Metal Roofing

Metal isn’t the right answer for every Dallas house, but when it is, the signs are usually concrete. Here’s what we see most often on the roofs we inspect around the city.

  • Your asphalt roof is failing after 12 to 15 years. Dallas heat and UV chew through asphalt shingles faster than the label promises. If you’ve replaced the same roof twice and don’t want a third, metal is the upgrade that stops the cycle.
  • You’ve had two or more hail claims in five years. North Texas hail seasons are brutal, and insurers notice repeat claims. A properly gauged metal roof can absorb impact that cracks shingle granules and exposes matting.
  • Your attic runs 20 to 30 degrees hotter than the living space. Metal with a reflective coating and proper underlayment knocks down heat gain in a Dallas summer, which shows up on your electric bill and takes pressure off your AC.
  • You’re in a neighborhood with architectural guidelines that accept metal. Areas of Lakewood, Preston Hollow, and parts of Oak Cliff have homes where standing seam matches the existing character and holds value at resale.
  • You’re staying in the house long-term. Metal costs more upfront than asphalt and pays that difference back over decades. If you’re selling in two years, asphalt is usually the better call.
  • You want a roof that sheds debris and rain hard. Dallas gets sudden heavy downpours, and metal’s smooth surface and steep seams move water off the roof instead of letting it pool near flashings.

Our Metal Roofing Process

Every metal roof we put on a Dallas home follows the same sequence. The order matters, and skipping steps is how metal roofs end up with leaks at the valleys and fasteners backing out within a few summers.

  1. Free inspection and measurements. We get on the roof, measure every plane, photograph the existing flashing and deck, and check the attic from underneath. You get an upfront number before we order anything.
  2. Material and panel selection. We walk you through standing seam versus exposed-fastener panels, gauge options, and reflective coatings. If your HOA or historic district has rules, we work within them.
  3. Tear-off and deck repair. The old roof comes off, and we inspect the decking. Soft spots, rotted fascia, and bad decking get replaced before underlayment goes down. That’s the part most cheap bids skip.
  4. Underlayment and flashing. High-temp synthetic underlayment, new valley metal, new pipe boots, and proper step flashing at walls and chimneys. This is where metal roofs leak if it’s done wrong.
  5. Panel install and fastening. Panels get set, aligned, and fastened to spec. Standing seam uses concealed clips that let the metal move with heat; exposed-fastener systems get gasketed screws driven to the right depth so they don’t over-compress.
  6. Final walkthrough and cleanup. We clean the site, walk the roof with you, and hand over the workmanship guarantee in writing. Most single-story jobs are done in a few days, weather permitting.

Metal Roofing Pricing in Dallas

Dallas metal roofing pricing depends on the panel system, the roof’s square footage and pitch, and how much prep work the deck needs. Here’s what we see in this market, installed.

Scope Typical Range
Exposed-fastener metal (economy panels) $9,500 – $16,000
Standing seam metal, standard gauge $18,000 – $28,000
Standing seam with premium finish/coating $26,000 – $38,000+
Deck repair or replacement (per sheet) $300 – $900
New flashing, valleys, and boots $600 – $1,500
Full tear-off and disposal $1,200 – $3,000

A few things push a Dallas metal roof toward the top of that range. Complex rooflines with multiple hips and valleys take more panel cutting and more flashing labor. Steep pitch slows installation and adds safety rigging. Two-story homes and tight lot access add labor. And if the existing deck has rot, that’s real money before any metal goes down.

On the other side, our standing offers make a larger project more workable. Every estimate is free, with a full design consult, so you see the number before you commit. We offer 0% financing for 18 months on approved credit, plus $1,000 off projects over $10,000. And because pricing is upfront, the number on the estimate is the number you pay, not a starting point that creeps up mid-job.

If you want a baseline comparison before deciding, our Dallas service area page lays out the other work we do, or look at our parent roofing service for shingle and tile options. Call (844) 797-4808 and we’ll get a real number on the table for your house.

Metal Roofing Materials and Brands

Metal roofing is only as good as the panels and coatings behind it. We work with a curated set of manufacturers so homeowners pick quality rather than whatever’s in stock that week. That includes CGI and CWS metal systems, both of which we’ve installed across Dallas and know how they perform in Texas heat. We don’t put every brand on every job; we match the system to your roof’s pitch, your budget, and how long you plan to stay in the house.

Two things matter more than brand name when you’re buying metal in Dallas. Panel gauge, meaning steel thickness, is the single biggest driver of how a roof handles hail and wind. And the finish coating decides how the metal holds color under relentless UV. A 26-gauge panel with a good Kynar finish will outlast a 29-gauge panel with a cheap paint job every time, even if the cheaper one has a familiar logo on the box. We’ll tell you plainly which system your house needs and why.

Why Dallas Homeowners Choose Metal

Dallas is hard on roofs. Summer surface temps on a dark asphalt roof routinely hit 150°F or more, and the swing between a 105°F August afternoon and a 35°F January night works on every seam and fastener. Metal handles that cycle better than any other common roofing material because it’s engineered to move.

The hail question comes up in almost every conversation we have in Dallas. Metal doesn’t make a roof hail-proof, and we won’t tell you it does. What it does is resist impact damage far better than asphalt when the panel gauge is right and the fasteners are set correctly. Homeowners who’ve replaced shingles twice from storm damage find that a real difference.

Metal also earns its keep on energy. Reflective metal with proper underlayment and attic ventilation cuts heat transfer into the living space. In a Dallas summer, that’s not a marketing line, it’s a line item on your electric bill.

The other reason homeowners go metal is lifespan. A well-installed metal roof can last decades longer than asphalt. Combined with our 730-Day Done Right Promise, that means the workmanship on the day of install is backed in writing for two full years. If something isn’t right, we make it right.

Questions We Hear Most About Metal Roofing

Is metal roofing worth it in Dallas?

Yes, for most homeowners planning to stay in their house long-term. Metal costs more upfront than asphalt, but a metal roof can last roughly two to three times as long in Dallas heat, resists hail better, and lowers summer cooling load. If you’re selling within a couple years, asphalt usually makes more financial sense. Call (844) 797-4808 for a free estimate and we’ll run the comparison for your specific house.

How long does a metal roof last in Dallas?

A properly installed standing seam metal roof typically lasts 40 to 70 years in this climate, and exposed-fastener systems usually run 25 to 45 years. The variables are panel gauge, coating quality, and whether the fasteners and flashing were installed to spec. Dallas heat and UV are the main aging factors; hail is the wild card.

Does metal roofing attract lightning or make my house hotter?

No on both counts. Metal doesn’t attract lightning, and a grounded metal roof is actually safer in a storm than most alternatives. And metal with a reflective coating stays cooler than dark asphalt, not hotter. The surface can be warm to the touch, but the heat transfer into the attic is lower than asphalt because of reflection and proper underlayment.

Can metal roofing go over my existing shingles?

Sometimes, but we usually recommend a full tear-off. Going over shingles traps the old roof’s problems under the new one, adds weight, and can void manufacturer warranties on the metal. A tear-off lets us inspect and repair the deck, which is where leaks start. It costs more, and it’s the right call more often than not.

Get a Free Metal Roofing Estimate in Dallas

Metal roofing is a real investment, and you deserve a straight number and a written guarantee before anyone touches your house. Call (844) 797-4808 and a live person answers, day or night. We’ll schedule a free inspection and design consult, walk you through standing seam versus exposed-fastener panels, and put an upfront estimate in your hands. If it’s the right roof for your Dallas home, we’ll install it right and back it for 730 days. If it isn’t, we’ll tell you that too.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas.

Need Construction help in Dallas? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch