Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence in Dallas, TX
An aluminum fence in Dallas typically costs $28 to $54 per linear foot installed, depending on height, style, and how much ornamental detail you choose. Aluminum is the fence most Dallas homeowners pick when they want a clean, painted-metal look that won’t rot, warp, or turn into a rust problem the way a steel fence will in our summer heat.
Groundwork Construction Co. of Dallas builds aluminum fence the way we build everything: upfront pricing before a single post goes in the ground, background-checked technicians who show up in uniform, and the 730-Day Done Right Promise behind the finished work. If the gate sags or a panel rattles loose, we come back and make it right. Call (844) 797-4808 and a live person picks up, any hour, any day.
We treat aluminum as one branch of a larger trade. For the full picture on gates, materials, and layout, look at our Fence Installation in Dallas page, or browse everything Groundwork does from our home base. This page is specifically about aluminum: where it wins, where it loses, and what it actually costs in Dallas.
Key Takeaways
- Aluminum fence installed in Dallas runs about $28 to $54 per linear foot, or roughly $3,900 to $7,500 for a typical 140-foot residential property line.
- Aluminum is the right call when you want the look of wrought iron without the rust, weight, or upkeep of steel.
- Our technicians have up to 12 years of experience setting posts and hanging gates in North Texas soil and freeze conditions.
- Every aluminum fence we install is covered by the 730-Day Done Right Promise.
- Calls are answered by a live person 24/7, and project pricing is quoted upfront before work begins.
When You Need Aluminum Fence
Aluminum fence fits a more specific set of situations than cedar or vinyl. Here’s when it’s the obvious choice and when we’d steer you elsewhere.
- You want a property line that reads as ornamental, not utilitarian. Aluminum comes in picket, spear-top, and decorative panel styles that mimic wrought iron. In neighborhoods like on the west side of Highland Park or around Munger Place, that matters: a 4-foot black aluminum picket fence satisfies the front-yard look most HOAs and historic districts expect, where a stockade cedar fence would get flagged.
- You’ve had a wooden fence fail after a few seasons. Dallas humidity and our freeze-thaw swings are brutal on cedar. We regularly see bottom rails soften and posts lean within five to seven years if the wood wasn’t properly sealed. Aluminum skips that entirely.
- You need pool code compliance. Dallas pool barrier rules require a minimum 4-foot height with self-closing, self-latching gate hardware. Aluminum is one of the cleanest ways to hit that spec while keeping sightlines open around the water.
- You’re fencing around trees or sloped grade. Aluminum panels rack to follow grade, so a yard that falls a foot across 30 feet doesn’t need stepped, jagged panels. That’s common in the older lots around Lakewood and the heavily treed properties near White Rock Lake.
- You want a fence you can wash, not replace. A garden hose and a soft brush handle aluminum. No staining, sealing, or repainting on a schedule.
- You’re weighing security on a corner lot. A 5- or 6-foot aluminum fence with a proper latch gives you a defined boundary without blocking the view a corner property depends on for visibility.
Where we’d push back: if the goal is total privacy, aluminum is the wrong material. Panels are open. For a solid privacy line we’d steer you to cedar or a composite privacy panel instead. If that’s where you land, our main Fence Installation page walks through those options.
Our Aluminum Fence Process
Setting aluminum looks straightforward until a post lands in the wrong grade or a gate swings open on its own two weeks later. Most of the work is in the layout and the footer. Here’s how we run it.
- On-site measurement and layout. We walk the property with you, confirm the exact property line (or pull the plat if there’s any question), and mark post locations. On Dallas lots, we check for irrigation lines, gas, and buried electrical before any digging. This is also where we flag grade changes and gate placement.
- Material and style selection. You pick the panel style, height (4, 5, or 6 feet are the common choices), color, and gate count. We walk through finish options (powder-coated vs. gloss) so the fence you get matches what you pictured. Pricing is locked before we order.
- Post setting. Aluminum posts are set in concrete footers, not just driven or surface-mounted, unless we’re installing over an existing concrete or stone wall. Footer depth matters in North Texas clay, which expands and contracts with moisture swings. Shallow footers are why fence posts lean here. We set them to depth and let the concrete cure before hanging panels.
- Panel and gate installation. Panels get racked to follow grade, leveled, and fastened to spec. Gates get set with proper hinge alignment and a self-closing, self-latching mechanism where code or preference calls for it.
- Walkthrough and cleanup. We do a full walkthrough with you: every gate swing, every post, every fastener. Haul off all scrap, packaging, and concrete debris. Nothing left for you to clean up.
- 730-Day Done Right follow-up. The guarantee runs two full years. If a post settles, a gate drops, or a fastener works loose, we come back and fix it. That’s the whole point of putting it in writing.
Most residential aluminum fence projects finish in one to three days depending on linear footage and gate count. A straightforward 100-foot run is typically a single-visit job.
Aluminum Fence Pricing in Dallas
Aluminum fence in Dallas runs about $28 to $54 per linear foot for the fence itself, plus $350 to $900 per gate depending on width and hardware. A typical residential property line of 140 feet lands somewhere between $3,900 and $7,500 installed. Here’s how that breaks down.
| Line Item | Typical Dallas Range |
|---|---|
| Standard 4-foot aluminum picket fence | $28 – $38 per linear foot |
| 5-foot ornamental or decorative panel | $36 – $46 per linear foot |
| 6-foot heavy-gauge aluminum | $44 – $54 per linear foot |
| Walk gate (standard, with latch) | $350 – $550 |
| Drive gate (single) | $650 – $900 |
| Racking for sloped grade | $3 – $6 per linear foot |
| Tear-out and haul-off of old fence | $200 – $600 typical |
What moves the price up or down:
- Height and gauge. Thicker aluminum (heavier gauge) and taller panels cost more but hold up better against impact and wind.
- Finish. Powder-coated finishes in custom colors run higher than standard black. Specialty colors and two-tone are a premium.
- Gate count and type. Each gate adds cost, and a drive gate with automatic hardware adds more.
- Grade and terrain. Steep or uneven yards that need extra racking or stepped sections cost more. Properties around the White Rock Lake bluffs and the older streets in East Dallas tend to need more racking than flat suburban lots.
- Tear-out. Removing and hauling off an old wood or chain-link fence adds cost, and old concrete footers add more.
- Site access. Tight lots where a truck can’t reach the fence line slow things down.
We quote upfront. The number you see on the estimate is the number you pay, with no mid-job surprises. On projects over $10,000, $1,000 comes off the total, and 0% financing for 18 months is available so a full property fence doesn’t have to be a lump-sum hit. Estimates and design consults are free, so you can price it out without committing.
One note on comparison shopping: aluminum prices swing with the price of metal and with finish supply, so a quote from last spring won’t hold. Lock realistic pricing with a current estimate.
FAQs – Aluminum Fence
How much does an aluminum fence cost in Dallas?
An aluminum fence in Dallas costs about $28 to $54 per linear foot installed, or roughly $3,900 to $7,500 for a typical 140-foot residential property line, with gates adding $350 to $900 each. Height, gauge, finish, gate count, and how much racking the yard needs all move the number. Call (844) 797-4808 for an exact quote; estimates are free and quoted upfront.
Is aluminum or wrought iron better for a Dallas yard?
Aluminum is the better choice for most Dallas homeowners because it won’t rust the way wrought iron does in our humidity and summer storms. It’s also lighter and needs less maintenance. Wrought iron wins on pure weight and traditional looks, but it requires repainting and rust-touch-up. Given our climate, aluminum gives you the same ornamental look with far less upkeep. We can walk you through both during a free consult.
Can you install an aluminum pool fence that meets Dallas code?
Yes. We install aluminum pool fencing at the 4-foot minimum Dallas barrier code requires, with self-closing and self-latching gate hardware to match. We confirm the exact height and latch spec against local requirements and your pool layout before ordering. Call (844) 797-4808 and we’ll sort out the code details on the first visit.
How long does aluminum fence installation take in Dallas?
Most residential aluminum fence projects in Dallas finish in one to three days. A single straight run with one or two gates is often a one-visit job. Larger properties, lots of gates, or heavy tear-out push it toward three days. We’ll give you a realistic timeline in the written estimate, not a vague promise.
Aluminum fence is one of the smartest boundary investments a Dallas homeowner can make: it holds its look through our heat and humidity, needs almost no upkeep, and gives you that wrought-iron elegance without the rust fight. Groundwork Construction Co. of Dallas brings the 730-Day Done Right Promise, uniformed background-checked technicians, and a live person on the line 24/7 to every job. We install with the same care we’d want behind our own property line.
Ready to price it out? Call (844) 797-4808 for a free estimate. We’ll measure, walk the line with you, and put a firm upfront number in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas.