Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Dallas Owner’s Guide
KraftMaid kitchen remodeling in Dallas typically runs $14,000 – $45,000 installed, depending on cabinet line, door style, layout changes, and whether we’re replacing countertops and backsplash at the same time. KraftMaid builds semi-custom cabinetry in lines like Momentum, Linen, and the Value and Deluxe tiers, and each line carries its own box dimensions, drawer hardware, and finish options – so matching a replacement part or planning a remodel starts with the exact line, not a guess. Most Dallas owners discover a problem the same way: a drawer that stops gliding smoothly, a door that won’t sit flush, a shelf pin that’s stripped its hole, or a soft-close hinge that slams no matter how gently you let it go.

Which KraftMaid Models This Applies To
KraftMaid cabinetry is organized by product line and door style, and the part you need depends on both. The label inside the cabinet box (usually on the back of a door or on the interior side panel near the top hinge) lists the line, finish, and often a part or order number. If the label is gone, measure the door and drawer front precisely – KraftMaid standards differ by line, and a Momentum drawer front won’t line up with a Deluxe box even when the cabinet footprint looks identical from the outside.
Here’s the OEM-vs-aftermarket call most Dallas owners actually face: soft-close hinges, drawer slides, shelf pins, and door bumpers are commodity hardware, and quality aftermarket equivalents from brands like Blum and Grass fit KraftMaid boxes just fine – often with better tolerances than the original. What you should stick with KraftMaid for is anything visible or structural: door fronts, drawer faces, toe kicks, and finish-matched filler panels. Color and sheen vary between production runs, and a “white” door from five years ago is not the same white as this year’s. Our technicians have up to 12 years of experience matching KraftMaid lines and sourcing the right replacement hardware for each one.
A Dallas-specific gotcha: the DFW humidity swing between a wet spring and a dry August works on cabinet boxes and door fronts continuously. MDF doors will swell and delaminate at the edges over years of that cycling, and particleboard shelf pin holes loosen as the material swells and shrinks. If you’re seeing edge swelling on a KraftMaid door, the door itself is the part to replace – new hardware won’t fix a swollen slab.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
Watch for these symptoms. Each one points to a specific part or box problem, and catching it early is the difference between a hardware swap and a full door replacement.
- Drawers that stick, wobble, or drag. The drawer slide or its mounting screws are failing. Soft-close undermount slides wear out on the damper end after years of use, and the slide no longer holds the drawer square in the box.
- Doors that hang crooked or won’t close flush. Usually a hinge that’s lost tension or screws that have stripped out of the cabinet face. Left alone, a sagging door torques the other hinge and eventually cracks the screw holes.
- Doors and drawers that slam instead of easing shut. The soft-close mechanism inside the hinge has failed. It’s a small part, but a kitchen full of slamming cabinets gets loud and eventually damages the door fronts.
- Shelf pins that won’t hold a shelf. The pin hole has enlarged from load and humidity cycling. A shelf that drops with a full load of dishes is a warning that the pin holes need sleeving or the shelf needs a support upgrade.
- Edge swelling, peeling finish, or delamination on MDF doors. Water and humidity have gotten into the door core. This is a door replacement, not a repair – patching a swollen edge rarely holds in Dallas summers.
Replacement Cost & What’s Included
Pricing below reflects what Dallas owners actually pay, installed, for KraftMaid-compatible work. These are the ranges we stand behind – the number you see is the number you pay, with a written line-item quote before work starts.
- Full KraftMaid kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation (new boxes and doors): $4,000 – $13,000
- Countertop installation (Cambria, Silestone): $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What moves you up or down that range: the KraftMaid line and door style, whether the layout changes (which means plumbing and electrical relocation), finish level, cabinet quantity, and countertop material. Hardware swaps, hinge and slide replacements, and finish-matched door replacements can be scoped as their own smaller job rather than a full remodel. We pull permits where Dallas requires them and pass inspection. Every project we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is safe to check yourself, and some of it isn’t worth the risk. You can swap a door bumper, tighten a hinge screw, replace a shelf pin (a slightly larger sleeve-style pin often solves a loose hole), or check the label inside the cabinet to confirm the KraftMaid line and finish. Those are the easy wins.
Where DIY goes wrong: reinstalling a stripped hinge or slide into a cabinet box that’s already softened from humidity, matching a replacement door color without pulling the exact finish from the label, and replacing soft-close hinges that weren’t a match for the door weight – a mismatched hinge will pull out again within a season and take the screw holes with it. None of this is a safety hazard like a garage door spring, but it is a place a bad repair costs more than a correct one.
If you’re not sure which part failed or whether the box itself is sound, call (844) 797-4808. A live person answers 24/7, and the estimate is free.
FAQs
KraftMaid cabinet boxes typically hold up for 20+ years, but the soft-close hinges and drawer slides are the first parts to fail – usually within 8 to 12 years in Dallas’s humidity cycling. Replacing those hardware parts extends the life of the cabinet box by years. Call (844) 797-4808 for an exact quote on a hardware refresh – estimates are free.
Sometimes. A loose hinge screw can often be tightened or the hole sleeved and re-driven, and a soft-close hinge that’s lost tension can occasionally be adjusted at the screw, not replaced. When the slide or hinge body itself is cracked or the damper has failed, replacement is the honest answer. We’ll tell you which situation you’re in before any work starts.
A single hinge, slide, or shelf pin replacement is a short visit – often done in the same appointment as the diagnostic. A set of door fronts or a cluster of slides typically takes a half day to a full day depending on quantity. Most jobs are completed in a single visit, and we confirm scope and timing in writing first.
We match the part to your exact KraftMaid line, using the cabinet label or a precise measurement if the label is gone, then source either the OEM part or a quality aftermarket equivalent depending on what fails and what fits best. You get the honest recommendation and the price before anything is ordered. We’re an independent service provider and not affiliated with KraftMaid, so we don’t pretend to be. Call (844) 797-4808 to start – estimates are free.
Schedule Your Free KraftMaid Kitchen Estimate in Dallas
If your KraftMaid cabinets are working against you, we can scope the fix in a single visit. Groundwork Construction Co. of Dallas installs KraftMaid-compatible cabinetry and hardware across the metro, alongside Cambria, Silestone, and Kohler for countertops and fixtures, and every job is backed by the 730-Day Done Right Promise. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday. We also offer $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult. Call (844) 797-4808 today to schedule yours.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.