Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Roofing: The Dallas Owner’s Guide
Wellborn-compatible roofing installation in Dallas typically runs $8,000 – $20,000 for a full assembly and $400 – $1,800 for targeted repairs, with most jobs scheduled within a few days of your estimate. We install and service Wellborn-compatible roof components matched to your existing system, and we quote the number in writing before any crew goes up. Owners usually discover the failure the same way: a water ring on a ceiling in the hallway, granules collecting in the gutter after a spring storm, or a shingle edge lifted on the windward slope. Dallas roofers who specialize in this work also know that a small leak goes from nuisance to rot fast.

Which Wellborn Models This Applies To
Wellborn roofing components turn up across the brand’s residential product lines, and the right replacement depends on the profile you have, not the year printed on a brochure. The fastest way to identify your system is the deck itself: pull the fascia at one eave and measure the shingle reveal (usually 5 to 5 5/8 inches on a standard three-tab), record the underlayment type, and photograph the original stamp on any drip edge. Most Wellborn-compatible installations use a 30-year architectural shingle; some carry a Class 4 impact rating, which matters in Dallas hail country. If any of that is unreadable, snap a photo of the roof from the ground and one close-up at the rake edge; that’s usually enough to match.
The OEM-versus-aftermarket question is real here. A factory Wellborn shingle matches your existing color and profile exactly, so a spot repair blends in. A quality aftermarket equivalent costs 15 to 30 percent less and works fine when you’re replacing a full slope, but the color will drift over a Texas summer, and a patch on a visible plane will show. On repairs under one square, we lean OEM. On full replacement, we quote both and let you see the difference. We are not affiliated with Wellborn; we install compatible components and stand behind the work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Roofing Is Failing
- Granules in the gutter after a hailstorm. That’s the protective coating shedding off the shingle mat. Dallas hail accelerates granule loss faster than most of the country, and once the mat is exposed, UV breaks it down within a season.
- A brown water ring on the ceiling or attic decking. Water found a path through a lifted seam or a nail pop. The stain shows up hours after the water got in, so what you see is old news.
- Curling or lifting shingle edges on the sun-facing slope. Thermal cycling from Dallas summers does this to any shingle past its service life. On the south slope it usually happens first.
- Torn or missing ridge cap after wind. A ridge cap comes off in a gust of 60 mph or more and takes the sealant strip with it. It looks minor from the ground and lets wind-driven rain straight into the attic.
- Peeling or cracked pipe boots and flashing. These fail before the shingle does. A cracked boot around a vent stack is the single most common cause of small leaks we chase in Dallas.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what you’re looking at for installed pricing in Dallas:
| Scope | Installed price range |
|---|---|
| Targeted roof repair (flashing, boots, small patch) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What moves you up or down that range: roof pitch, the number of valleys and penetrations, whether the deck underneath is sound or has soft spots, and how many layers of old shingle need to come off. We quote parts and labor line by line so you can see where the money goes. Every job is covered by our 730-Day Done Right Promise, so the workmanship is guaranteed in writing, not just the materials.

DIY or Call Us?
Some things you can check yourself: from the ground, look for lifted shingles, granules in the gutter, and staining on the underside of the deck from inside the attic. That’s a smart first look. What you shouldn’t do is climb up and start prying shingles. A pitched roof is genuinely dangerous, a fall can be catastrophic, and a hurried repair that doesn’t reset the flashing properly just pushes the leak somewhere you won’t see until it’s cost you decking. This is work for a trained roofer who knows how water actually moves. If you’ve got a failing Wellborn-compatible roof in Dallas, call us at (844) 797-4808 and we’ll give you a straight read before you commit to anything. The estimate is free, and the number in the quote is the number you pay.
FAQs
How long does a Wellborn-compatible roof last in Dallas? Expect 20 to 25 years for a 30-year architectural shingle in Dallas, not the full rated life. The rating is measured under lab conditions; hail, UV, and summer heat cycling cut it short. A Class 4 impact shingle holds up longer where hail is a factor. Call (844) 797-4808 to have your roof assessed before it fails.
Can this roof be repaired instead of replaced? Often yes. If less than a quarter of the roof area is affected and the deck is solid, a targeted repair handles it. Spot repair runs $400 – $1,800. Once more than a quarter of the slopes are failing, repair stops making economic sense and replacement is the smarter call. We’ll tell you which one you’re looking at. Call (844) 797-4808 for a free estimate.
How long does a roof install or repair take? A targeted repair is usually done in a single visit. A full roof replacement on a typical Dallas single-story takes one to two days, depending on pitch, access, and weather. We schedule the crew and the dumpster together so there’s no roof sitting open overnight. Call (844) 797-4808 to get it on the schedule.
How do you source the Wellborn-compatible part? We identify the profile from your existing shingle and any deck stamp, then order the matching shingle or component through our supplier. We let you know the lead time up front so you’re not guessing. Wellborn, plus the KraftMaid, Cambria, and Silestone lines we also service, are all quoted the same way: parts and labor itemized, no surprises. Call (844) 797-4808 to start your free estimate.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.