A Groundwork company - serving Dallas, TX

Wellborn Fence Installation in Dallas, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Fence Installation: The Dallas Owner’s Guide

We install Wellborn-compatible fencing across Dallas, and the typical installed cost runs $3,500 – $9,000 depending on footage, material, and site conditions. Because this is planned construction, not emergency work, most jobs are scheduled within a week of your approved estimate, and most standard installations finish in one to two days on site. The number you see on your written quote is the number you pay.

professional kitchen remodeling service in Dallas, TX

Call (844) 797-4808

Owners rarely wake up knowing a fence part failed. They notice it standing in the yard. A gate that sags and drags across the concrete. A corner post leaning after the first hard spring storm. Pickets that pull loose at the rail because the fasteners backed out. You find it on a Saturday, and by Monday it is the thing you cannot stop thinking about.

Which Wellborn Models This Applies To

Wellborn builds fence systems, gates, and hardware, and the part you need depends on which of their product lines your fence came from. Before we ever touch pencil to estimate, we confirm the line: metal or ornamental aluminum runs fit differently than their vinyl and composite lines, and gate hardware kits are matched to specific frame sizes. A hinge spec’d for a light residential walk gate will not carry the load of a wider drive gate, and that mismatch is common on fences inherited from a prior homeowner.

Here is how to find your part. Look for a manufacturer label or stamp on the gate frame, a post cap, or the underside of a rail. Then measure twice: actual picket width, rail-to-rail spacing, post thickness, and gate opening in inches. Those measurements matter more than the model name because Wellborn specs have shifted over the years and older stock is not always interchangeable with current stock. If the label is gone, measurements are your answer.

On OEM versus aftermarket: for structural components and gate hardware, use the Wellborn-spec’d part. For pickets and caps, a quality match from a reputable supplier works fine and often saves money. On anything load-bearing, do not improvise.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Fence Installation Is Failing

  • Posts leaning or pulling out of the ground. Dallas’s shrink-swell clay soil moves seasonally, and a post set too shallow or in soil that was not properly prepared will start walking out of plumb after a wet spring and dry summer. This is a footing problem, not a post problem.
  • Gate sag and drag. A gate that swings low or scrapes the ground usually means the hinge hardware has worn, or the gate frame has lost its square. On a Wellborn gate, worn hinge pins are the usual culprit before the frame itself fails.
  • Loose or backed-out fasteners. Screws and clips that pull free at the rails point to thermal movement and an install that did not account for expansion. In a Dallas summer, a fence panel that was installed tight has nowhere to go but out.
  • Cracked or faded panels. UV exposure and heat do real work on vinyl and composite over years, and hairline cracks at stress points mean the material is past its prime. A cracked panel is a replacement, not a repair.
  • Rust on metal components. Rust at welds, hinges, and post caps signals moisture has been sitting where it shouldn’t. On aluminum it should not happen; if it is, the finish has been compromised.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Wellborn fence installation in Dallas, plan on $3,500 – $9,000 installed. Vinyl fence installation lands in that same $3,500 – $9,000 band; aluminum fence installation runs $4,000 – $10,000. Repairs to gate hardware or individual panels are quoted separately once we see the failure.

The range is driven by four things: total linear footage, material choice, post footing requirements (Dallas clay digs differently than sandy soil), and whether existing fencing must be removed. Your estimate is written line by line, separating parts and labor, so you can see exactly what each component costs. That number does not move once work starts. Every installation is covered by our 730-Day Done Right Promise, which means if it is not done right, we make it right.

DIY or Call Us?

Some of this is fair game. You can safely identify your model, measure your fence, check whether a gate hinge is loose, and confirm whether a post is actually in the ground. That information makes your estimate faster and more accurate.

Where DIY goes wrong on fence work: post footing depth and soil prep, gate hardware load matching, and structural rail connections. A post set too shallow will pass a jiggle test in March and be leaning by June in Dallas. Gate hardware installed on the wrong frame will fail under load, and a falling gate is a real hazard around kids and pets. We would rather you call than stand under a gate that is one hinge away from coming down. Call (844) 797-4808 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch