A Groundwork company - serving Dallas, TX

Moen Windows & Doors in Dallas, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Windows & Doors: The Dallas Owner’s Guide

We install and service Moen-compatible windows and doors across Dallas, and the installed price for the typical replacement window or entry door runs $4,500 to $15,000 for a standard window package, or $8,000 to $25,000 when you move up to impact-rated glass. When a single unit fails, repairs usually land well under that. Dallas homeowners usually find the problem the hard way: a window that won’t latch shut in August heat, glass fogging between the panes after a spring hailstorm, or a door that suddenly drags because the frame swelled in the humidity. One thing up front: Groundwork Construction Co. of Dallas is an independent service provider. We’re not affiliated with Moen, and we don’t pretend to be the manufacturer. What we do is match the right part and hardware to what’s already in your wall, quote it in writing, and stand behind the install with our 730-Day Done Right Promise.

professional roofing service in Dallas, TX

Call (844) 797-4808

Which Moen Models This Applies To

Moen’s window and door hardware shows up most often on sliding patio doors and hinged exterior doors – rollers, tracks, handles, multi-point lock sets, and weatherstripping – and on window operator and latch hardware. To match the right part, you don’t guess from a photo. Do this instead:

  • Find the label. Window and door makers put a certification or identification label in the frame channel or on the glass edge – look for a series or model number, not just “Moen.”
  • Measure the hardware, not the opening. Roller diameter, track depth, and lock backset (the distance from the door edge to the handle center) have to match to the sixteenth of an inch. A part that’s “close” won’t seat.
  • Photograph the failing part beside a tape measure. That single photo saves a return trip and a second install visit.

On the OEM-versus-aftermarket call: for a moving part like a roller or a lock, an OEM Moen component is worth the premium when it’s still available, because the tolerances match what’s already cut into your frame. For static items like weatherstripping or a handle screw pack, a quality aftermarket equivalent performs the same at lower cost, and we’ll tell you which is which before you decide. We don’t keep parts on a truck and we don’t stock inventory – we source the correct part for your specific model, then install it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Windows & Doors Is Failing

Dallas weather is hard on window and door hardware. The swing between humid summers and the occasional hard freeze works frames and seals in ways a milder climate never does, and hail season does the rest. Here’s what failure looks like, and why:

  • Glass fogging or condensation between the panes. The sealed glass unit has lost its gas fill through a failed seal – once moisture gets in, the unit won’t clear and the glass has to be replaced, not cleaned.
  • A door that drags or sticks in summer, then frees up in winter. Wood and composite frames swell with humidity and shrink when it’s dry. If it sticks every summer, the frame or the hinges have shifted, not just the weather.
  • Rollers grinding or the slider jumping the track. Worn rollers or a bent track on a sliding door. Left alone, a bad roller chews the track and turns a small part swap into a full track replacement.
  • Water staining or soft wood at the sill or bottom corners. A failed seal or flashing let water in. By the time you see the stain inside, the framing behind it may already be wet.
  • A lock that won’t fully engage, or a handle that turns but doesn’t latch. Worn multi-point hardware or a misaligned strike. On an exterior door this isn’t just annoying – it’s a security gap you want closed.

If you’re seeing two or more of these on the same unit, the part has usually failed alongside something else. That’s worth a look before you buy a replacement you don’t need.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Most Moen window and door hardware repairs in Dallas are priced as a part-plus-labor job, quoted in writing before we start. Here’s how the ranges break down for the work we see most:

  • Hardware-only repair (rollers, locks, handles, weatherstripping): the smallest jobs – we quote your exact part and labor upfront so the number you see is the number you pay.
  • Single window replacement: $4,500 to $15,000 for a standard window package, scaled by count, size, and glass type.
  • Impact-rated window installation: $8,000 to $25,000, driven by the number of units and Dallas County impact code requirements.

What moves the price: the number of units, glass type, whether the frame is sound or needs repair behind it, and access. Every quote is line-itemed – part, labor, and any framing repair called out separately – so nothing shows up as a surprise mid-job. All of it is covered by our 730-Day Done Right Promise.

DIY or Call Us?

Some checks are safe and smart to do yourself. Tightening a loose handle, cleaning a track, or confirming your model number from the frame label – go ahead. Where DIY goes wrong on windows and doors is at the glass and the frame. Replacing a sealed glass unit or re-hanging an exterior door means lifting weight, holding a seal line, and re-setting hardware square; done wrong, you get a leak, a broken pane, or a door that never latches right again. Anything involving glass replacement, sealed-unit swaps, or frame and structural repair is where we step in – and if a repair ever means getting on a ladder or working above height, that’s a trained-professional job, not a weekend project. If you’re unsure whether your issue is a part or the whole unit, call us at (844) 797-4808 and we’ll help you sort it out. A live person answers, and the estimate is free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch