Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Dallas Owner’s Guide
Your Schluter shower assembly, curb, or bonded waterproofing membrane sits behind the tile, which is why the first sign of trouble usually shows up as a soft grout line, a loose tile, or water staining at the curb long before you can see the failed layer itself. Dallas bathrooms built with Schluter components will last decades when the system is installed correctly, but the pass/fail work happens in the waterproofing layer you never see. If water is already getting behind the tile in a Dallas bathroom, the fix almost always means removing the tile and rebuilding the system, not swapping a single part.

What a Schluter-system bathroom remodel typically costs in Dallas: $9,000 – $28,000 installed, depending on scope, tile selection, and whether you’re rebuilding a shower only or the entire room.
- Waterproofing layer is a factor, not an add-on: Schluter’s approach is a bonded sheet membrane over thin-set, so our installers treat this as a system, not tile glued to cement board.
- Dallas heat & clay soils: Dallas slab movement can stress a shower curb or threshold if it wasn’t properly bonded, and we check for that before quoting.
- Tile behind the membrane doesn’t fix water damage: If you’re calling because a Schluter part failed, the conversation is really about replacing the waterproofing system correctly.
Which Schluter Models This Applies To
Schluter’s bathroom line has several families, and knowing which one you have determines whether a repair is even possible without full removal. The three that show up most in Dallas bathrooms:
- KERDI – the industry-standard bonded sheet waterproofing membrane. Look for the orange polypropylene fleece-backed sheet behind the tile. Most often used on shower walls, floors, and curb.
- KERDI-BOARD – the rigid foam panel version used for walls and shower niches. You’ll see a printed grid and the KERDI name on the surface if you’ve got an exposed edge.
- KERDI-SHOWER – the pre-sloped shower tray and curb line, sometimes called the KERDI-SHOWER-LT or -T depending on thickness. The tray and curb are usually marked along the underside or packaging.
Read the label before you call about a replacement. If your shower uses a bonding flange drain (the square drain that bonds directly to the membrane), that’s the KERDI-DRAIN, and its compatibility with your new tray or membrane matters. Measure the drain center, the tray’s edge dimensions, and the curb’s outside corner-to-corner length. Those three measurements settle most model questions in a single phone call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
The symptoms of a failing Schluter system are the same whether it’s a ten-year-old shower or one installed last spring in a Dallas home. Here’s how to recognize it:
- Soft or crumbling grout at the base of the shower – usually means water has been working behind the tile and lifting the thin-set at the mud bed. Grout doesn’t rot on its own; it rots because water is getting past the membrane somewhere.
- Loose or hollow-sounding tiles – a tap with a plastic screwdriver handle (never a hammer) across the wall or floor surfaces a hollow tone where the thin-set has failed. Most often traced to poor thinset coverage during install, not the tile itself.
- Water stains or a bubbling caulk line at the curb – a fair indicator the membrane at the curb or drain connection has failed, or the curb was built without proper membrane wrapping.
- Grout cracks radiating from the drain – typically a sign the drain assembly wasn’t bonded correctly or the substrate flexes underfoot. Dallas slabs move; a correctly bonded KERDI-DRAIN won’t.
- A musty smell you can’t place – often a membrane failure behind the wall feeding a slow mold colony in the framing cavity. Not always visible from the surface.
Replacement Cost & What’s Included
Replacing a failed Schluter shower system means removing the tile, cutting out the failing substrate, and rebuilding the waterproofing from the framing out. It’s not a parts swap, and we price it accordingly.
| Scope | Typical Dallas Installed Range |
|---|---|
| Small bathroom remodel (including Schluter system rebuild) | $5,000 – $12,000 |
| Walk-in shower installation (full KERDI system) | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Full bathroom remodel | $9,000 – $28,000 |
What drives the range: tile selection, drain configuration, whether we’re opening a wall to repair framing, and whether your Dallas home’s plumbing needs work while the walls are open. All of our bathroom pricing is itemized up front, and the number you see is the number you pay. Every install is covered by our 730-Day Done Right Promise.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can check a few things safely. Probe the grout at the shower base with a fingernail to see if it crumbles, tap tiles lightly with a plastic handle to listen for hollow spots, and look at the caulk line at the curb for gaps or bubbling. Those checks help you decide whether to call.
Where DIY goes wrong is in the rebuild itself. Schluter systems require correct membrane overlap (minimum 2 inches at all seams), a 2-inch minimum membrane height past the shower curb, and proper thin-set (unmodified, per Schluter spec) – measured in the thousands of dollars of damage if done wrong. A waterproofing failure behind tile means ripping out the tile again. For a Dallas bathroom, that’s a call you make once. Call (844) 797-4808 and we’ll walk through what you’re seeing before anyone shows up.
FAQs
A correctly installed Schluter KERDI shower system regularly lasts 25 years or more. The failure points are almost always install-related (thin-set coverage, membrane overlap, drain bonding) rather than the material itself, and Dallas’s clay soils make slab movement a factor we address at install.
No, in almost every case. Schluter waterproofing sits directly beneath the tile, so any repair to the membrane means removing tile to reach it. Grout and caulk regrouting are the only surface-level fixes, and those treat symptoms without fixing the water intrusion underneath. Call (844) 797-4808 for a free assessment.
A shower-only KERDI rebuild typically runs 5 – 10 working days in a Dallas home, depending on tile size and whether the drain or plumbing needs replacement. A full bathroom remodel in the same Schluter system typically runs 2 – 4 weeks. Most jobs are scheduled and completed without surprises – our upfront pricing and written scope make the timeline clear before we start.
We specify Schluter-compatible components through verified supply channels and confirm model compatibility (drain type, board thickness, membrane family) before ordering. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Schluter. If you’re also comparing Kohler fixtures or coordinating with KraftMaid, Cambria, or Silestone for adjacent work, we handle those in the same bid.
Book a Free Estimate
If you’ve got a Schluter bathroom failing in Dallas, the fix starts with an honest assessment – not an upsell. Call (844) 797-4808 for a free estimate and design consult. Our line is answered by a live person 24/7. We’ll walk through what’s happening, what a correct rebuild costs in your Dallas home, and put it in writing. If you qualify, our standing offers of $1,000 off projects over $10,000 and 0% financing for 18 months apply.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.