A Groundwork company - serving Dallas, TX

Schluter Roofing in Dallas, TX

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Dallas Owner’s Guide

Schluter is known in Dallas for waterproofing and tile edge systems – KERDI, DITRA, SCHIENE, JOLLY – not for roof coverings, so “Schluter roofing” here means a roofing detail or component near a tile, balcony, or low-slope transition that depends on a Schluter profile or membrane, and installed pricing for that work in Dallas typically runs $650 to $3,200 depending on the assembly and square footage. We don’t, however, install Schluter products as a roofing line, and we’re not affiliated with Schluter. Owners usually discover a failure the same way: a hairline crack in a profile edge, a stain spreading across a ceiling below a balcony, or a hollow, loose-sounding tile along a parapet where the membrane has debonded.

Construction professionals framing a wall for a home addition project in Dallas, TX

Call (844) 797-4808

Groundwork Construction Co. of Dallas is an independent full-scope home construction partner. If your project touches a Schluter KERDI or DITRA assembly, we’ll tell you straight whether it’s in our wheelhouse or whether a Schluter-certified tile installer is the right call. We do that on the phone, for free.

Key Takeaways

  • Schluter makes ceramic tile substrate, waterproofing, and edge-profile systems – not shingles, underlayment, or standing-seam metal. Knowing that upfront saves Dallas homeowners a bad estimate.
  • Most “Schluter roof” failures we’re called to in Dallas are really membrane debond or profile corrosion at a tile-to-flat transition, not a failed roof.
  • Installed repair work runs $650 to $3,200. Full roof replacement, if that’s the honest answer, runs $8,000 to $20,000 in Dallas.
  • Our technicians have up to 12 years of experience, and every project is covered by the 730-Day Done Right Promise.

Which Schluter Models This Applies To

Schluter’s product families break into two buckets, and knowing which one you have changes the whole conversation. The uncoupling and waterproofing family includes DITRA and DITRA-HEAT (tile substrate mats), KERDI and KERDI-BAND (sheet and band waterproofing), KERDI-BOARD (backer panels), and KERDI-LINE / KERDI-DRAIN (linear and point drains). The profile family includes SCHIENE (L-shaped edge profile for floor and wall tile edges), JOLLY (quarter-round edge), QUADEC (square edge), and TREP-E (tile transition ramp). If you’re looking at a roof-adjacent assembly in Dallas, you’re mostly in the KERDI and SCHIENE territory.

To identify your part, look at three things: the printed product label on the packaging or roll end (it lists the SKU and width), the profile cross-section (L-shape with a trapezoid anchoring leg is SCHIENE; quarter-round is JOLLY; square with an anchoring leg is QUADEC), and the membrane dimensions (KERDI 5M and 30M rolls differ in width; measure the roll face). Never assume an old profile matches the new SKU – Schluter has updated some profile dimensions over the years, and a 3/8″ SCHIENE today may not match a 20-year-old install exactly.

OEM vs. aftermarket: For Schluter products specifically, we’ll push you toward OEM. The whole value of a Schluter assembly comes from the KERDI-BAND overlap and mortar chemistry that the installer uses, and aftermarket look-alikes rarely hold the same waterproofing standard. Where aftermarket makes sense is on secondary trim and fasteners, not the waterproofing membrane or profile.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

These are the failure signatures we actually see on Dallas properties, especially in older homes around Oak Cliff and Uptown where KERDI-era tile balconies from the 2000s and early 2010s are now aging:

  • Cracked or pitted profile edges along parapets. The underlying cause is galvanized or PVC profile coating breaking down from UV exposure and wind-driven rain – Dallas gets 37 inches of rain a year and over 230 sunny days, so PVC profiles on roof-adjacent tile edges weather faster than owners expect.
  • Hollow tile or loose thinset along the balcony or terrace. The DITRA uncoupling layer has debonded, which happens when the original install used the wrong mortar or didn’t fill the dovetail grid. In Dallas heat, this is a warm-season failure – the mat expands more than the tile and the bond goes.
  • Water stains on the ceiling below a balcony or tile roof edge. KERDI-BAND seams have lifted, or the membrane wasn’t brought up the wall at least 2 inches. We see this most often in homes on the Park Cities side where the original tile installer skipped the inside corner bands.
  • Loose parapet coping or shifted edge profile. Thermal cycling between Dallas summers and winter fronts pops the profile off its anchoring leg. Once one section lifts, wind gets behind the rest.
  • Visible mold or efflorescence at the roof-wall transition. Moisture is trapped between the membrane and thinset because the KERDI wasn’t sealed at the perimeter. This one is a quiet cost multiplier if you wait.

If two or more of these show up at once, call us at (844) 797-4808. The whole point of catching it early is that the repair is $650 to $1,400 instead of a $4,000 tear-out.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Dallas, here’s the honest range. Installed Schluter assembly repair and restoration lands between $650 and $3,200, and full roof replacement – when the assembly has failed well beyond a localized fix – runs $8,000 to $20,000 using GAF or CertainTeed systems. Those numbers assume one story; add 15 to 25 percent for two-story access and add roughly $400 for KERDI-LINE drain replacement when that’s part of the job.

Scope Typical Installed Range (Dallas)
Localized SCHIENE / JOLLY / QUADEC profile replacement $650 – $1,200
KERDI-BAND seam repair and membrane re-sealing (up to 40 sq ft) $900 – $1,800
DITRA uncoupling mat localized tear-out and replace $1,400 – $3,200
Full roof replacement (GAF or CertainTeed) $8,000 – $20,000

What’s included: trash haul, membrane and profile material, thinset, KERDI-BAND and KERDI-FIX, and a written line-item quote before we start. No-hassle upfront pricing – the number you see is the number you pay. Every project is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. Calls are answered by a live person, 24/7, and estimates and design consults are free.

DIY or Call Us?

You can safely check the profile color and cross-section, look for visible cracks, and photograph the assembly from a ground-level ladder. That’s information we want on the phone.

Where DIY goes wrong on a Schluter assembly is at the actual repair step. Schiene and KERDI-BAND need specific unmodified or modified thinset based on the substrate – Schluter publishes a compatibility chart and it matters. Using the wrong mortar voids the Schluter warranty and re-fails within a season in Dallas heat. Cutting the profile to fit often breaks the anchoring leg, and lifting the KERDI membrane to “check underneath” is one of the fastest ways to turn a $900 seam repair into a $3,000 tear-out.

And if the work involves getting up on a steep roof pitch or repairing anything at the parapet of a two-story home, that’s a call-us job for safety alone. Our technicians have up to 12 years of experience and are background-checked and in uniform. Call (844) 797-4808 and describe what you’re seeing – we’ll give you a straight answer about whether it’s a repair or whether a Schluter-certified tile installer is the right route.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch