A Groundwork company - serving Dallas, TX

Schluter Home Additions & ADU in Dallas, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Home Additions & ADU: The Dallas Owner’s Guide

We build Schluter-compatible home additions and ADUs for Dallas homeowners, and most projects land between $45,000 and $130,000 for the addition work itself. Standard ADU construction in Dallas typically runs $90,000 to $220,000. Permits and plan review mean a planned addition is a scheduled project, not a same-day fix; we start with a free on-site estimate and a written line-item quote.

professional kitchen remodeling service in Dallas, TX

Call (844) 797-4808

Schluter Systems isn’t a structural brand. It’s the waterproofing, uncoupling, and edge-protection layer that lives under your tile, at your shower pan, behind your backsplash, and along every expansion joint in a new floor. Owners usually discover a problem the same way: a grout line in the new addition’s bath keeps cracking no matter how many times it’s patched, or a soft spot spreads across floor tile near an exterior door. When the substrate has moved and the Schluter membrane or profile wasn’t set correctly under it, the finished surface above is the part that tells you. We’re an independent contractor and not affiliated with Schluter, which means we match the right membrane and profile to your actual slab, wall assembly, and Texas climate rather than to a catalog page.

Which Schluter Models This Applies To

“Schluter” covers a dozen product families, and which one you have changes the part and the fix entirely. The big ones in Dallas additions and ADUs are DITRA and DITRA-XL (uncoupling membrane for tile over slab or plywood), KERDI and KERDI-BOARD (waterproofing for showers and wet walls), DITRA-HEAT (the heated version), and the finishing profiles like SCHIENE, JOLLY, and RONDEC.

Identify yours by the printed roll edge or mat face: DITRA has a square grid of dovetailed channels; KERDI has a fleece face and a smoother orange look. Profile sizing is the compatibility gotcha most homeowners miss: a trim profile is matched to tile thickness in millimeters, not inches. If your new addition’s bath tile is 9.5 mm thick, an 8 mm profile will not sit flush, and forcing it is exactly what causes the cracked edge trim people call us about.

On the OEM-versus-aftermarket question for Schluter: match the membrane by exact product name and roll width (DITRA comes in 12″ and 39″ widths; KERDI-BAND in 5″ and 7″), and don’t substitute a generic uncoupling mat without reading the specs. The thinset underneath each one is different, and the wrong pairing voids the system. We can source the correct Schluter component for your job as part of the build.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Home Additions & ADU Is Failing

These are the symptoms we actually see in Dallas additions, along with what’s really going on under the tile.

  • Hairline cracks tracking the grout lines. The uncoupling membrane isn’t isolating the tile from slab movement, so the tile takes the stress. In Dallas’s expansive clay soil, a new addition’s slab will move seasonally, and an improperly keyed membrane doesn’t forgive that.
  • Hollow tapping under floor tile. Thinset didn’t bond to the mat or the slab, often because the mat was installed over a dusty or damp surface. A hollow sound over a wide area means the tile is sitting on air, not adhesion.
  • Recurring moisture at the shower curb or pan edge. KERDI wasn’t lapped and sealed at the seams and corners. Grout discoloration and a musty smell that returns after cleaning point straight to a waterproofing break.
  • Edge trim popping loose or the tile chipping at it. A SCHIENE or RONDEC profile set without enough thinset behind the anchoring leg works free over time. This is worst where the profile meets a door jamb or an expansion joint.
  • Lippage that appears after the first summer. One tile edge sits proud of its neighbor, months after a flat install. That’s the slab moving under a membrane that wasn’t installed to spec, not a bad batch of tile. Call it in early; tile that’s already cracked can often be corrected before it spreads.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

There’s no flat “replacement” price for a Schluter system inside a larger addition, because the fix depends on how much finished tile has to come up to reach it. Here’s how the numbers break down for Dallas projects. These are the same ranges we quote across every Dallas market, so budget confidently.

Scope Installed price range (Dallas)
Home Addition (full project, Schluter detail included) $45,000 – $130,000
ADU Construction (full project) $90,000 – $220,000
Garage Conversion (into living space) $30,000 – $80,000
Bathroom Remodel within the addition (KERDI shower, DITRA floor) $9,000 – $28,000
Walk-In Shower Installation (full KERDI waterproofing system) $4,500 – $12,000

What drives the range on a Schluter-specific correction: how much finished tile and substrate must come out, whether the slab is sound or needs prep first, and whether you’re specifying a premium material. Danby marble in a new Dallas bath has very different movement characteristics than porcelain, and it demands a specific Schluter membrane to stay put. We give you a written line-item quote, upfront pricing with no surprises, and a fixed price before we start, so a membrane fix doesn’t turn into an open-ended bill. Every Schluter detail we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We also carry the same standard on KraftMaid cabinetry, Cambria and Silestone surfaces, and the other brands in our portfolio, so the addition is finished to one consistent spec.

DIY or Call Us?

Some things you can check safely yourself; some you shouldn’t touch. Here’s the honest split.

You can: tap across floor tile to find hollow spots, photograph the printed label on any leftover Schluter roll, measure your tile thickness with calipers, and note where grout cracks keep returning. You can also confirm whether your addition’s plans call for an uncoupling membrane at all.

Skip the DIY here: replacing a KERDI shower pan or re-waterproofing a wall assembly means tearing out finished tile, and getting the seam laps and thinset wrong means the leak comes back in a season. There’s no spring or gas line here, but a failed waterproofing layer quietly rots framing behind the wall, and that’s a repair you don’t want to make twice. If you’ve got recurring moisture, cracking grout, or loose profile trim, call us at (844) 797-4808 and we’ll take a look. That call also gets you our free project estimate and design consult.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch