A Groundwork company - serving Dallas, TX
S

Sterling Driveway & Pavers in Dallas, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Driveway & Pavers: The Dallas Owner’s Guide

If your Sterling driveway or paver system has a cracked, heaved, or settled section, Groundwork Construction Co. of Dallas installs Sterling-compatible driveway and paver replacements across the Dallas area at installed prices from $7,000 to $18,000 for a paver driveway, with most straight swaps scheduled inside a normal project window rather than a single-day turnaround. We’re an independent contractor, not affiliated with Sterling, and we match the base, bedding, and paver profile to what your system actually calls for.

Two professional contractors installing custom kitchen wall cabinets in Dallas, TX

Call (844) 797-4808

Owners rarely find out something is wrong all at once. It usually starts with a hairline crack spreading across a slab panel after a summer of 100-degree days, a low corner of the driveway holding water after a storm, or pavers that rock underfoot near the garage apron where the slab meets the street. In Dallas, expansive clay soil does much of the damage, swelling when it soaks up rain and shrinking hard in drought. When the ground moves, the driveway pays for it.

Which Sterling Models This Applies To

Sterling isn’t a single product line, so the right part depends on which system you have. Most residential Dallas driveways fall into one of two families: a poured concrete slab, or a segmental paver system set on a compacted aggregate base with a sand joint fill. Before ordering anything, identify your actual construction. Look for control joints cut into the concrete (usually in a grid), a paver surface with visible joint sand, or an edge restraint along the sides. Measure the driveway footprint, the paver dimensions, and the base depth if a section is already open. Those numbers determine the replacement material, not the brand name alone.

The OEM-versus-aftermarket call matters here. For pavers, a quality aftermarket block from a brand like Belgard in the same nominal size, thickness (typically 2 3/8 to 2 3/4 inches for residential), and color family often matches an existing Sterling pattern closely enough to blend. For a concrete slab, matching the mix and finish matters more than any branded label, and a good local pour reaches the same strength spec (3,500 to 4,000 psi for residential driveways). We specify materials to your existing system and tell you plainly when an exact color or profile match isn’t realistic.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Driveway & Pavers Is Failing

If you’re seeing any of these, the surface problem usually traces back to the base or the soil under it, not just the top layer:

  • Spiderweb cracking across a slab. Caused by clay soil movement or a slab poured thin without proper base prep – the crack is the symptom, the foundation is the cause.
  • Heaving or sinking sections. One panel or paver field rides high or drops low because water is pooling underneath and the subgrade has shifted. Dallas downpours speed this up.
  • Loose or rocking pavers. Joint sand has washed out or the bedding layer has failed, so individual blocks move when you walk on them. Left alone, edges chip and the base erodes further.
  • Standing water after rain. Poor drainage or a settled low spot holds water against the surface and accelerates cracking and freeze-thaw wear on the odd cold Dallas morning.
  • Faded, stained, or crumbling surface. Sun exposure, tree sap, and de-icing salt strips the finish and lets moisture into the material. A surface this far gone is usually telling you the whole system is due.

Replacement Cost & What’s Included

Installed pricing for a Sterling-compatible driveway replacement in Dallas depends on material and square footage. Here’s what Dallas homeowners typically see:

Scope Dallas Price Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement (existing torn out) $5,000 – $14,000
Driveway sealing (maintenance) $250 – $700

The range is driven by square footage, material choice, demolition and haul-off, base repair depth, and edge restraints or drainage corrections. Our quotes show parts and labor as separate line items so you can see exactly where the money goes, no hidden add-ons. Upfront pricing, no surprises: the number you see is the number you pay. Every install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.

Two professional contractors installing custom kitchen wall cabinets in Dallas, TX
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself. Walk the driveway after a rain and mark where water stands. Tap a slab with a screwdriver handle and listen for a hollow sound that signals a void underneath. Sweep back loose joint sand to see whether the base is intact. Those checks tell you whether you’re facing a cosmetic fix or a structural one.

Where DIY goes wrong is the tear-out and base. A driveway is only as good as the compacted subgrade beneath it, and a weekend patch over settled Dallas clay re-cracks within a season. A full replacement means cutting and hauling concrete, re-compacting base in lifts, and getting drainage right so water runs away from the slab. That’s heavy, dusty work with real injury risk from demolition and lifting. If your system is more than surface wear, call (844) 797-4808 and we’ll tell you straight whether you need the whole thing or just a section. Estimates are free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch