A Groundwork company - serving Dallas, TX

Owens Corning Bathroom Remodeling in Dallas, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Bathroom Remodeling: The Dallas Owner’s Guide

Owens Corning bathroom remodeling in Dallas ranges from $9,000 to $28,000 installed, depending on the scope you choose and the moisture-control products you build in behind the tile. Most Dallas bathroom projects we quote run one to three weeks from demo to final walkthrough, not a single day, because tile, waterproofing and inspections need real cure time. In this market, owners usually discover an Owens Corning product has failed the same way: a soft spot behind the shower wall, a moisture stain creeping past the cement board, or an insulation batt that’s gone limp and dark after two summers of attic heat. The product itself rarely fails on day one. It fails after years of Texas humidity finding a seam that was never taped right.

Contractor installing quartz kitchen island countertop during a home renovation. in Dallas, TX

Call (844) 797-4808

Which Owens Corning Models This Applies To

Owens Corning doesn’t make a single “bathroom remodeling” product. What Dallas homeowners actually install from this brand falls into a few categories, and knowing which one you have changes everything about the part you need.

The most common is Owens Corning FOAMULAR rigid foam board, used as a tile backer in wet areas or as insulation behind a bathroom wall. It comes in thicknesses from ½ inch to 2 inches, and the compressive strength rating (labeled as 15, 25, 40 or 60 psi) tells you which grade you’re holding. Bathroom walls typically call for the 25 psi or higher grade; builders who used the 15 psi utility grade in a shower wall are the ones we find failing.

Second is Owens Corning PINK fiberglass batts, still the default insulation in Dallas bathroom exterior walls. R-values for 2×4 walls land at R-13 to R-15; 2×6 walls run R-19 to R-21. If you’re matching a batt, the R-value is printed in large type on the kraft facing, and the width (15 inch or 23 inch) has to match your stud bay exactly, or you’re creating an air gap that defeats the purpose.

Third, and less common in bathrooms but present in older Dallas builds, is Owens Corning basement finishing insulation repurposed in below-grade or slab-adjacent bathroom spaces.

To identify what you have, pull the label off the product itself before you buy anything. The label carries the series, the R-value or compressive strength, and the lot code. Match all three. For the OEM-versus-aftermarket decision: FOAMULAR has real, tested equivalents from other manufacturers that meet the same ASTM C578 standard, and a quality aftermarket board is a legitimate choice when the spec matches. PINK fiberglass batts are less forgiving; aftermarket batts with the same R-value but a lower density will sag faster in a Dallas attic, so stick close to the Owens Corning spec there. One note: Groundwork Construction Co. of Dallas is an independent service provider, not affiliated with Owens Corning.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Bathroom Remodeling Is Failing

  • Soft or spongy spots behind the shower tile. Water has reached the foam board or the framing behind it. This is usually a taped-seam failure or a missing waterproofing layer, not the board itself.
  • Musty smell that returns after cleaning. Moisture is trapped inside a wall cavity. In Dallas bathrooms without a working exhaust fan, this shows up within two to three years.
  • Limp or discolored fiberglass batts in the wall. The kraft facing has been wet, and wet batts lose most of their R-value. You’ll feel the difference as a cold wall in winter.
  • Grout cracking along a straight line at the shower floor or wall seam. The backer board has flexed or shifted. That’s a substrate failure, not a grout failure, and re-grouting is a temporary patch.
  • Peeling paint or bubbling drywall on the bathroom’s shared wall. Moisture has migrated through the backer assembly into the drywall on the other side. This one is a real warning sign, and it’s worth opening the wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A full Owens Corning-backed bathroom remodel in Dallas runs $9,000 to $28,000, and the range is driven by four things: square footage, whether you move plumbing, the tile and fixtures you select, and how much water damage we find once the wall opens up. A small bathroom remodel lands between $5,000 and $12,000. A walk-in shower installation runs $4,500 to $12,000, and a tub-to-shower conversion comes in at $3,500 to $10,000.

Every scope we quote is line-item, upfront and fixed. That means the board product, the waterproofing membrane, the fasteners and sealant, the tile, the fixtures, the labor and the permit are each shown with a number against them. There’s no open line for “miscellaneous” and no change orders based on assumptions. If the price changes, it’s because you approved a change, not because the crew found something and passed the cost along quietly. All work carries our 730-Day Done Right Promise, so if something fails in the first two years, we make it right.

DIY or Call Us?

You can safely handle a few diagnostic steps. Turn off the water, pull the escutcheon plate off the shower valve and look for moisture behind it. Check the label on any exposed insulation or foam board with your phone camera. Run the exhaust fan and hold a tissue to the grille to confirm it’s actually pulling air. Those three checks tell you most of what you need to know before you call anyone.

Where DIY goes wrong on this one is the wall assembly. Taping foam board seams wrong, skipping the waterproofing membrane, or reinstalling fiberglass batts with a gap at the top plate all create a moisture problem you won’t see for years. The visible tile will look perfect the day you finish and fail on the inside during the third summer. We also run into plenty of Dallas bathrooms where the original install put the vapor barrier on the wrong side of the wall; fixing that means taking the wall down to the studs. It’s not a repair, it’s a rebuild, and it needs to be planned rather than improvised.

If you’re not sure which side of that line you’re on, call (844) 797-4808. A technician can walk you through what you’re looking at before you spend a dime on materials.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch