Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Home Additions & ADU: The Dallas Owner’s Guide
We build Owens Corning-compatible home additions and ADUs in Dallas, and installed costs here typically run $45,000-$130,000 for an addition and $90,000-$220,000 for a detached ADU, depending on size, foundation work and finish level. Owens Corning supplies the insulation and roofing system inside that envelope, not a wall assembly or a subfloor, so the “part” that fails on a Dallas addition is almost always one of those two: wet, compressed insulation behind a knee wall or a shingle field that’s been cooked by a west-facing summer. Owners usually find out the same way. A back bedroom that used to hold 74 degrees won’t drop below 80 in August, or a brown ring shows up on the ceiling of a new primary suite after a May hailstorm.

Which Owens Corning Models This Applies To
Owens Corning doesn’t sell additions or ADUs. What you’ll actually match to a Dallas project is insulation and roofing: R-13 and R-15 EcoTouch PINK fiberglass batts in 2×4 walls, R-19 and R-21 in 2×6 exterior walls, and blown-in ProPink L77 or AttiCat in the attic, where Dallas code effectively wants R-38 to R-49 in the ceiling plane. On the roof side you’re looking at Oakridge, Duration and Duration Designer shingles, plus WeatherLock underlayment and Deck Defense or RhinoRoof synthetic underlayment. Match on the label, not on the color.
Every bag of EcoTouch carries an R-value and a width and thickness on the printed face; the shingle wrapper lists the series name and the wind rating. If the label is gone, measure the cavity depth and the joist spacing before you order anything, because a 2×6 wall doesn’t take an R-13 batt the way a 2×4 does. Batts compress, and compressed batts lose the exact R-value you paid for.
The OEM-versus-aftermarket call matters less here than it does for mechanical parts. Owens Corning batts are commodity fiberglass, so a comparable R-value from another reputable manufacturer performs about the same in a Dallas wall. Shingles are different. Off-brand three-tab that claims a similar look won’t carry the same wind warranty, and in a market that gets hail like Dallas does, that paper matters. We’re an independent service provider and not affiliated with Owens Corning, so we’ll tell you plainly when the brand name is doing real work and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Home Additions & ADU Is Failing
- A room over the garage or in the addition stays hot while the rest of the house is fine. Usually under-insulated or compressed batts behind the knee wall, worsened by a west-facing wall taking full afternoon sun. Dallas attic temps push 140 degrees in July, and a thin insulation layer stops holding.
- Brown ceiling rings or soft drywall at the addition’s roof transition. Water is getting past the step flashing where the new roof meets the original house, or the underlayment was lapped the wrong direction. This shows up most after spring hail in Dallas, not during a calm rain.
- Granules in the gutters and a shingle field that looks sandpapered. Heat and hail wear the granular surface first; once it’s gone, the asphalt underneath bakes and curls.
- Drafts along the baseboard of an exterior wall. Batt edges weren’t tucked tight to the plate and studs, so air moves freely between the cavity and the room.
- Condensation or a musty smell in an ADU bathroom or kitchenette. Exhaust ducting that terminates in the attic instead of through the roof dumps moisture straight into the insulation. In a Dallas summer that’s a mold problem by August.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Dallas homeowners actually pay for the work tied to these materials, parts and labor together:
| Scope | Typical installed range |
|---|---|
| Attic insulation upgrade (blown-in to R-38+) | $1,800-$4,500 |
| Wall batt replacement in an addition | $1,200-$3,800 |
| Shingle repair after hail (partial field) | $400-$1,800 |
| Full roof replacement on an addition or ADU | $8,000-$20,000 |
| Home addition, full scope | $45,000-$130,000 |
| Detached ADU, full scope | $90,000-$220,000 |
| Garage conversion to living space | $30,000-$80,000 |
The spread comes from size, foundation type (pier and beam versus slab), whether the addition needs its own HVAC run, and finish level. We quote line by line so you can see the shingle line, the insulation line and the drywall line separately, and the number you see is the number you pay. Everything we install carries the 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Look in the attic for batts that have fallen over, compressed or turned gray-black with moisture. Measure your insulation depth against a tape. Photograph the ceiling stains and note whether they spread after a storm. That information helps us quote accurately.

What you shouldn’t do is crawl into a Dallas attic in August, walk a two-story addition roof, or take apart the flashing at a roof-to-wall transition. Attic heat stroke is real, and roof work at height is the leading cause of serious injury in residential construction. Flashing done wrong hides for a year and then rots the framing. Call (844) 797-4808 and we’ll send a background-checked, uniformed technician to look at it and give you a free estimate.
FAQs
Attic insulation holds its R-value for 25 to 30 years if it stays dry; once it gets wet or compressed, figure on replacement within a season or two. Architectural shingles like Duration typically go 20 to 25 years in Dallas, shorter on south and west slopes that take the worst sun and hail. Call (844) 797-4808 for an exact quote – estimates are free.
Often yes. Compressed batts in a few wall cavities can be swapped without touching the rest, and a hail-damaged shingle field can sometimes be patched rather than torn off. If more than a quarter of the addition’s roof is damaged, or the underlayment is compromised, replacement is the better money. Call (844) 797-4808 and we’ll tell you which one you’re looking at.
An insulation swap in an addition is usually a single visit. A roof replacement on an addition or ADU runs one to three days. A full addition is a months-long project, and we’ll give you a written schedule up front. Call (844) 797-4808 to schedule your free estimate.
We buy through verified supplier channels, so the R-value on the bag and the wind rating on the shingle wrapper are what the manufacturer actually published. We don’t stock parts and we don’t carry material on a truck – it’s ordered to your project. If a specific Owens Corning series isn’t available, we’ll tell you before we substitute anything. Call (844) 797-4808 to talk it through.
We also work with KraftMaid, Cambria and Silestone on the interior side of additions, so a new ADU kitchen and bath can be quoted in the same visit as the envelope.
If your Dallas addition isn’t holding temperature or your ADU roof is showing storm wear, call (844) 797-4808 for a free estimate. Upfront pricing, no surprises, live person on the line 24/7, and $1,000 off projects over $10,000 with 0% financing for 18 months available.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.