Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Dallas Owner’s Guide
We install IKO-compatible windows and doors across Dallas, and most full window replacements run $4,500 – $15,000 installed, with impact-rated units landing between $8,000 and $25,000. Door replacements usually fit inside those same ranges or below. Diagnosis and repair of a single failed unit can often be handled in one visit. Most Dallas owners find out something’s wrong the same way: a window that won’t latch, glass that fogs from the inside, or a door that suddenly drags on the threshold.

Which IKO Models This Applies To
IKO builds windows and doors across several product lines, and parts aren’t universal across them. The first step is identifying what you actually have. Pull the manufacturer’s label – it’s usually on the top or side of the window frame, or on the hinge edge of a door slab – and write down the model and series number. If the label’s gone, measure the visible glass and the frame opening. Balances, sash locks, weatherstripping, and hinge hardware are specific to both the series and the size.
For IKO specifically, the OEM-vs-aftermarket decision matters more than it does with some brands. OEM parts are guaranteed to match your exact series, but lead times on discontinued lines can stretch. A quality aftermarket balance or lock will work fine when it matches the weight class and series dimensions – and won’t when it’s close but not exact. We measure before we order. Generic parts boxes don’t cut it in Dallas homes where a half-inch gap means a window that leaks.
One compatibility gotcha worth knowing: IKO has changed sash balance configurations between production runs of the same nominal series. “Same series, same size” isn’t always the same part – the stamp on the balance or the lock’s mounting hole spacing is what settles it. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with IKO.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
- Fogging between the panes. The insulated glass unit’s seal has broken and moisture is trapped inside. No amount of cleaning fixes it – the sealed unit needs replacing.
- A window that won’t stay up. The sash balance (or the spiral balance rod) has lost tension or snapped. It’s a wear part, and in Dallas heat the tension drops faster than owners expect.
- Doors that drag, stick, or won’t latch. Usually a hinge that’s worked loose, a shifted frame, or weatherstripping that’s compressed flat after years of Texas sun. Often fixable without replacing the door.
- Drafts or water stains around the frame. Failed weatherstripping, a cracked glazing bead, or caulk that’s dried and pulled away. Small leak now, rotted framing later if it’s ignored.
- Condensation on the inside of the glass in Dallas humidity. A symptom of a failed seal or a window that isn’t performing. Worth diagnosing before the summer heat arrives.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, a full window replacement runs $4,500 – $15,000 depending on the number of units, series, and glass package chosen. Impact window installation, which many Dallas homeowners choose for storm resistance, runs $8,000 – $25,000. Those numbers include the units, the removal and disposal of the old windows, and installation labor. What pushes you higher: more units, impact-rated glass, non-standard sizes, or hidden rot found once the old window comes out.
You get the price in writing before we start – line by line, no change orders, no surprises. The best part isn’t an upfront promise, it’s a number that holds. For projects over $10,000, we also take $1,000 off, and 0% financing for 18 months is available. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Call (844) 797-4808 to schedule your free estimate.
DIY or Call Us?
A few things are genuinely safe to handle yourself: cleaning tracks, re-caulking around the exterior frame, tightening loose hinge screws, and replacing weatherstripping on a door. If you can reach it from the ground with a step stool and it doesn’t involve glass, hardware tension, or the frame itself, it’s usually fair game.
What goes wrong: replacing a sash balance on a window without matching the weight class, removing a sealed glass unit without knowing the frame’s retention system, or trying to realign a door that’s out of square. These turn a $30 part into a $500 repair more often than owners expect. Window and door work also puts you near heavy glass and on ladders – a fall or a cracked pane is a real cost. Call (844) 797-4808 and we’ll tell you honestly whether it’s a part, a repair, or a replacement.
FAQs
Expect 15 – 20 years from a quality IKO window in Dallas, sometimes less on west- and south-facing units that take the full afternoon sun. Sealed glass units and weatherstripping are the first to go – usually 10 – 15 years – while the frame and hardware hold up longer. Texas heat and humidity accelerate seal failure, so if your windows are 12-plus years old and fogging, that’s normal wear, not a defect.
Often, yes. A fogged sealed glass unit can be swapped without replacing the whole window. A snapped balance, a failed lock, a worn hinge, or flattened weatherstripping are all repairable parts. Full frame replacement is only the answer when the frame is warped, rotted, or the unit no longer meets your performance needs. We’ll tell you which situation you’re in after we inspect it – no upselling a replacement when a part will do.
A single window or door part swap usually takes under an hour. A fogged glass unit replacement is typically a single visit. Full replacement of a window or door is a couple of hours per unit, and most of our jobs are completed in a single visit. Multi-window replacements are scheduled in phases so your home isn’t open to the weather for more than a day.
We identify your model and series from the frame label or measurements, then order the matching OEM part or a quality aftermarket equivalent that meets the same specs. We don’t carry parts on a truck or keep stock – we order what your unit needs and bring the right part to the job. If the OEM part is discontinued, we tell you upfront and present an aftermarket option that fits. Estimates are free – call (844) 797-4808 for an exact quote.
Groundwork Construction Co. of Dallas also works with KraftMaid, Cambria, and Silestone on the interior side, and we handle windows and doors as part of full-scope projects from foundation to finish line. If you’re pricing a single repair or planning a whole-home upgrade, the call is the same. Reach us at (844) 797-4808 – a live person answers, 24 hours a day, seven days a week. The estimate is free, and there’s no pressure to book.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.