Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Dallas Owner’s Guide
We install and service Tamko windows and doors across Dallas, and the installed price for a typical window replacement runs $4,500 – $15,000 for the home. Impact-rated units, which matter here for storm season, run $8,000 – $25,000. If your window is sticking, fogging, or letting in water, you’re likely looking at a failed seal, a worn balance or hinge, or a rotted sill, and the fix depends on which part gave out.

Most Dallas owners notice the failure before they go looking for a part. A window that won’t stay up. Condensation trapped between panes. A door that catches on the threshold every July. Water staining the drywall under a frame after a rain. That last one is the one to act on quickly, because a leaking sill can rot the wall cavity before you see it from inside.
Which Tamko Models This Applies To
Tamko’s window and door line has changed names and SKUs over the years, so the model matters more than the brand on the frame. The most reliable way to identify what you have is the label on the glass or the jamb: it will list the series, the glass package, and often the date of manufacture. If the label is gone, measure the rough opening (the stud-to-stud gap the frame sits in) and the visible glass width and height. Those three numbers let us match the correct replacement or part.
Older Dallas homes sometimes carry Tamko products that are no longer in current production. In that case, the part is matched by dimension and function rather than by an exact SKU. OEM parts fit the original frame exactly. Quality aftermarket equivalents cost less and often perform the same, but the tolerances are the thing to check. A balance or hinge that’s 1/8 inch off will rattle, bind, or fail early. We pull the actual measurements before we order, and we tell you plainly when an aftermarket part will work and when it won’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
These are the failure modes we see most often in Dallas, and what’s usually behind each one.
- Window won’t stay open. The balance or spiral spring has lost tension. On tilt-in windows this is almost always the balance, not the sash.
- Fog or condensation between the panes. The insulated glass seal has failed and moisture is trapped inside. The glass unit needs replacing; cleaning won’t fix it.
- Door drags on the threshold or sticks in summer. The hinges have sagged or the frame has swelled with humidity. Dallas heat and humidity move wood frames more than most owners expect.
- Water staining or soft wood around the frame. The sill or flashing has failed and water is getting behind the wall. This is the one to call on early.
- Draft or rattling in wind. Worn weatherstripping, a failed sweep, or a loose lock that no longer pulls the sash tight.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Dallas depends on size, glass package, and whether the frame is sound. Here’s what the ranges look like for the work we do.
| Work | Installed Range |
|---|---|
| Window replacement (whole home, standard) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Single sash or glass unit replacement | Quoted per unit |
| Door replacement (entry or patio) | Quoted per opening |
What moves the number: the glass package (impact-rated costs more), whether we’re replacing the whole unit or just the sash, and whether the rough opening needs repair. We quote line by line, parts and labor separated, so you see exactly what you’re paying for. No change orders after the fact. Every job carries our 730-Day Done Right Promise: if it isn’t done right, we make it right.
DIY or Call Us?
Some checks are safe to do yourself. Confirm the model on the glass label. Measure the rough opening and the visible glass. Look for soft wood at the sill with a screwdriver, and note whether the fog is inside the glass (seal failure) or on the room side (humidity).

Where it goes wrong: pulling a sash out of a tilt-in frame without knowing the balance release, or prying a door frame to shim a hinge that’s already sagged. You can bend the frame, crack the glass, or open a water path you didn’t have. If the sill is soft or water is getting behind the wall, stop and call us. Windows and doors are structural to the envelope, and a bad repair costs more than the original part.
Call (844) 797-4808 for a free estimate on the repair or replacement. Our technicians have up to 12 years of experience, and we source the right part for your Tamko model before anyone touches the frame.
FAQs
Expect 15 – 20 years for quality windows and doors in Dallas conditions, sometimes less on the sun-exposed south and west sides where UV and heat do the most damage. The glass seal and the weatherstripping usually give out before the frame does. Call (844) 797-4808 for a free inspection if yours are past that mark.
Often yes. A failed balance, hinge, weatherstrip, or lock is a part swap, not a new window. A failed glass seal means the insulated unit gets replaced, not the whole frame. We tell you which one you’re dealing with before quoting. Call (844) 797-4808 for a free estimate and we’ll be straight about it.
A single part or sash swap is usually a same-visit job; a full window or door replacement runs longer depending on the opening and whether the rough frame needs repair. We give you the timeline in writing with the quote. Call (844) 797-4808 to schedule your free estimate.
We match by the label, series, and measured dimensions, then order OEM or a quality aftermarket equivalent depending on what’s available and what fits. If an exact SKU is discontinued, we match by dimension and function. We confirm fit before ordering. Call (844) 797-4808 and we’ll sort out which part you need.
Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Tamko. We also work with KraftMaid, Cambria, and Silestone on other projects.
Call Groundwork Construction Co. of Dallas at (844) 797-4808 to schedule your free estimate. Calls are answered by a live person 24/7, technicians are background-checked and arrive in uniform, and every project is backed by our 730-Day Done Right Promise. Ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.