Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Dallas Owner’s Guide
We install and repair Boral windows and doors across Dallas, and window or door replacement typically runs $4,500 – $15,000 installed, depending on size, glass package, and how many openings you’re replacing. When a unit starts failing, most Dallas owners notice it the same way: a draft at the frame during a January cold snap, condensation trapped between panes, or a sash that takes two hands to close. It almost never happens all at once. One day the window is fine, the next it’s whistling. That’s the point to call, before the problem spreads.

Which Boral Models This Applies To
Boral covers a lot of ground, from vinyl new-construction windows to aluminum-clad and entry door systems, so identifying your exact product before you price a repair matters more than most people expect. Look for the etched glass bug on the corner of the pane, or a label on the sash or frame. That bug lists the manufacturer date, factory code, and glass makeup. For entry doors, the labels sit on the door edge or hinge jamb.
Here’s the compatibility gotcha worth knowing: Boral vinyl window sashes and balances are sized to the specific series and factory, not to the nominal window height. A balance from a 32-inch window in another line often won’t seat in a Boral frame even though the dimensions look identical. Measure the visible glass height, the sash width, and the weigh point on the balance, then match those against the series, not just the rough opening. For cladding and door hardware, OEM and quality aftermarket often play well together, but for glass units and balances you want the right spec. We’re an independent Dallas service provider, not affiliated with Boral, so we source the correct part from the correct supplier rather than guessing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
Most of what fails on a Boral unit falls into a handful of patterns. Here’s what we see in Dallas homes:
- Fog or condensation between the panes. The sealed glass unit has lost its seal and moisture has entered the air gap. Once that happens, no amount of cleaning fixes it. The insulated glass unit needs replacing, not the whole window.
- Drafts at the frame or sash. Weatherstripping flattens and the sash seal degrades with age and Dallas’s summer heat swing. Sometimes the fix is a strip and gasket, sometimes it’s a sash replacement.
- A sash that won’t stay up or drops when opened. The balance is worn or the wrong spec for the sash weight. On a double-hung Boral window, a balance failure is the single most common call we get.
- Water staining on the interior trim or sill. This usually traces back to failed perimeter sealant, a blocked weep hole, or a door threshold that’s letting water past. Left alone, it reaches the framing.
- A door that sticks, sags, or won’t latch squarely. Hinge wear, a shifted frame, or a threshold that’s settled. Dallas’s expansive clay soil moves foundations, and exterior doors often show that movement first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas, installed window replacement runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000 depending on count and glass rating. A single failed insulated glass unit costs far less than a full window because the frame, sash, and hardware stay. A door replacement sits inside the window range for a standard unit; a full entry door system with sidelights runs higher.
What drives the number: the number of openings, glass package (low-E, impact-rated, or standard), whether the sash or the whole unit comes out, and any frame or trim repair behind it. We quote parts and labor as separate line items, so you see what the part costs and what the install costs. No change orders on our side. Upfront pricing, no surprises, and every window and door install is covered by our 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction.
DIY or Call Us?
A few things are safe to check yourself. Run a dollar bill around a closed window or door and feel for the drag. Clean the weep holes at the bottom of the exterior frame. Look at the glass bug to identify your Boral series. Check that the interior trim isn’t soft or stained.
Where DIY goes wrong: warm-edge insulated glass units are sealed under tension. Prying a glass unit or forcing a balance or sash on a Boral window can crack the pane or bend the frame, and then you’re replacing a window instead of a glass pack. Door hinge and threshold work is heavier and less forgiving than it looks, and a misaligned entry door on a settled Dallas slab is a problem that keeps coming back. If the frame is soft to the touch or the glass is failed, call us at (844) 797-4808 for a free estimate.
Frequently Asked Questions
Most Boral windows hold up well past 20 years, but the sealed glass unit is usually the first thing to go in Dallas heat, often in 10 to 15 years. The frame and sash typically outlast the glass. When the glass fails, replacing the insulated unit gets you the service life back without touching the rest.
Yes, often. A fogged insulated glass unit can be replaced without removing the frame. A worn balance or weatherstrip can be swapped in most double-hung and slider models. Full replacement is usually only needed when the frame itself is cracked, rotted, or the sash is no longer available. Call (844) 797-4808 and we’ll tell you which path makes sense before you commit.
A glass pack or balance swap is typically an hour or two per window and often done in a single visit once the part is in hand. A full window replacement or entry door system is a half-day to a full day per opening. We confirm the schedule when we quote, before any work starts.
We identify your series and factory code from the glass bug or door label, then order from the supplier that carries that specific Boral line, OEM or a certified equivalent that meets the original spec. We don’t modify a part to make it fit. If the exact part is no longer made, we tell you up front and explain the closest correct substitute. For non-Boral windows and doors, we also handle KraftMaid, Cambria, and Silestone installations in Dallas homes. Call (844) 797-4808 for a free estimate, and a live person answers any hour, any day.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.