Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The Dallas Owner’s Guide
We install and service PGT windows and doors across Dallas, and for a single failed unit you’re typically looking at $450 to $1,200 installed for one window (glass or balance work) or $700 to $2,200 for a patio door, with most single-unit swaps completed in one visit. A full-house PGT window replacement in Dallas runs $4,500 to $15,000, and impact-rated glass pushes that into the $8,000 to $25,000 range. If your unit is fogged, won’t latch, or drags on the track, we can quote it from measurements and photos before anyone drives out. Call (844) 797-4808 and a live person answers, 24/7.

Most Dallas owners find out something’s wrong the same way: a bedroom window fogs between the panes after a hard summer, a sliding door starts catching on the threshold, or the lock on a PGT casement stops grabbing in one corner. North Texas heat and the swing between 105-degree afternoons and winter fronts work seals and hardware harder than most of the country. Groundwork Construction Co. of Dallas is an independent service provider. We’re not affiliated with PGT, and we don’t claim to be. What we do is source the right part for your series and install it correctly, backed by our 730-Day Done Right Promise.
Which PGT Models This Applies To
PGT builds several lines that all land in Dallas homes, and the part you need depends entirely on which one you have. The WinGuard impact line uses heavier laminated glass and a different glazing bead than the aluminum series or the vinyl new-construction lines. A sash balance, roller assembly, or screen frame from one series will not fit another, even when the window looks identical from the street. Before we quote anything, we identify the unit: look for the PGT label on the top or side of the sash, inside the frame channel, or on the door panel edge. That label carries the series and glass code.
If the label is gone, we measure the visible glass, the frame depth, and the sash height, and we can usually match it from those three numbers plus the operator type (casement, single-hung, slider, or awning).
On the OEM-versus-aftermarket call, here’s our honest read. For hardware, balances, rollers, locks, and weatherstrip, a quality aftermarket equivalent is often the better buy: same fit, faster availability, and a fraction of the price of a factory order. For glass units with a specific impact or Low-E rating, order the glass to match the original label. A mismatched unit can fail an inspection or lose the rating the rest of the house relies on. We tell you which side of that line your part falls on before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Windows & Doors Is Failing
- Fog or condensation between the panes. The sealed glass unit has lost its seal and the desiccant is saturated. Dallas summers age these seals fast, and once the fog is inside the glass, no cleaning will touch it.
- The sash won’t stay up, or drops on its own. A failed balance spring or a broken spiral balance. On a double-hung this shows up as a sash that slams or won’t hold at half-open.
- Sliding door drags or jumps the track. Worn rollers, a bent track, or both. You’ll feel a hitch as you pull the panel and hear a scrape at the bottom rail.
- Locks and latches stop engaging. The keeper has shifted or the lock mechanism has worn. On a patio door this is also a security issue, not just a nuisance.
- Drafts and water at the frame after rain. Failed weatherstrip, worn sweep, or a clogged weep channel. Left alone, this is how sill rot and interior drywall damage start in Dallas homes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for PGT-compatible window and door work in Dallas runs in these ranges. The number you see is the number you pay: we quote line by line, parts and labor broken out, before work starts.
| Work | Installed Range in Dallas |
|---|---|
| Single window glass unit or balance replacement | $450 – $1,200 |
| Patio door roller, track, or lock service | $700 – $2,200 |
| Full window replacement (whole home) | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
What moves you up or down that range: series and glass type, whether we can match the part to an existing unit or need to order glass, the number of openings, and access (second-story work costs more). Included in every quote: the part, labor, old-unit haul-away, and sealing at the frame. Every install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Look for the PGT label and write down the series and glass code. Clean and lube the track on a sliding door, clear the weep holes at the bottom of the window frame, and test the lock by hand to see where it’s catching. Photograph what you find; that gets you a faster, more accurate quote.
Where DIY goes wrong: lifting a glass unit out of a frame or a second-story sash, because glass units are heavy, breakable, and a fall risk. Rewiring a lock or striking a new keeper takes more precision than it looks. And impact glass must be re-set and re-glazed correctly or the rating is lost. Windows and doors are a job for a trained installer, not a weekend project. Call (844) 797-4808 and we’ll tell you straight whether you need a part or a replacement.
FAQs
How long do PGT windows and doors last in Dallas? The glass seal on a PGT unit typically holds 15 to 20 years, but Dallas heat can shorten that to 10 to 15 in sun-exposed exposures. Hardware (balances, rollers, locks) wears out sooner, often in 7 to 12 years. Call (844) 797-4808 for a free estimate on replacing a worn part.
Can the part be repaired instead of replaced? Yes, often. A failed balance, roller, or lock is a repair; a fogged glass unit usually needs the sealed glass replaced, not the whole window. We quote the repair first when it makes sense, so you’re not sold a full replacement you don’t need. Call (844) 797-4808 for an exact quote.
How long does the swap take? Most single window or door part swaps are done in one visit, typically 1 to 3 hours per unit. Whole-home window replacement takes longer and we’ll give you the timeline in writing before we start. Call (844) 797-4808 to schedule.
How do you source the PGT part? We match your PGT series and label code to the correct OEM part or a quality aftermarket equivalent, and we tell you which one we recommend and why. Glass is ordered to the original rating. We don’t carry parts on a truck; we source to your unit. Call (844) 797-4808 to get the process started. We also work with KraftMaid, Cambria, and Silestone on other parts of the home.
If your PGT windows or doors need attention, call Groundwork Construction Co. of Dallas at (844) 797-4808. A live person answers around the clock, and your free estimate comes with upfront pricing and 0% financing for 18 months available. We’re built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.