Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Dallas Owner’s Guide
PGT doesn’t make roofing, so if you searched for “PGT roofing” you’re either looking at a PGT door or window component that sits near the roofline (a patio door threshold, a fixed transom, a window flashing channel) or a PGT-branded roofing accessory installed alongside a PGT product line. We install PGT-compatible flashing, seals and threshold components across Dallas, and the typical repair runs $400 – $1,800, with full assembly work reaching $8,000 – $20,000 when the surrounding roofing has to come apart. A failed seal shows up as water staining on the interior trim, a draft at the top of a patio door, or daylight along the frame after a hard rain. Call (844) 797-4808 for a free estimate, live person 24/7.

Which PGT Models This Applies To
PGT’s residential lines that turn up on Dallas homes are the WinGuard impact products, the Premier and Estate vinyl window families, and the sliding-glass and French door series that carry model numbers on the interior jamb label. That label is the one thing you should photograph before anything else. It lists the series and usually a manufacturing date, and it’s the only reliable way to match the right flashing kit or threshold part rather than guessing from the opening size.
The compatibility gotcha: PGT changed frame profiles across product generations, so a threshold seal from a 2012 Estate door will not seat in a 2019 Premier frame even when the rough opening measures the same. Measure the visible glass, the frame depth and the sill profile, and bring all three numbers to the quote. OEM parts are the safe match when the unit is under manufacturer coverage; a quality aftermarket flashing kit is fine on older units and often costs 30% to 50% less, but only if the profile matches.
We’re an independent service provider and not affiliated with PGT. That means we source what actually fits your unit rather than pushing one brand’s catalog.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
- Water staining on interior trim above or beside the opening. The flashing seal has broken and water is tracking behind the frame instead of shedding off it. Caught early this is a reseal; left alone it rots the header.
- A draft or daylight line at the top of a patio door. The threshold or head flashing has lifted or the sealant has dried out. Dallas summers bake sealant faster than most homeowners expect.
- Peeling paint or soft wood along the frame exterior. Moisture is trapped where the roofing meets the frame. This is the point where a $400 repair turns into a $1,800 one if you wait a season.
- Granule loss or curling shingles directly above the unit. The flashing detail was done wrong at install and the roof deck is taking the water. This is the failure we see most often on Dallas homes built in the last 15 years.
- Ice-dam-style staining after a heavy rain, even in summer. North Texas downpours overwhelm a compromised seal faster than steady rain. A stain that appears only after storms is a flashing problem, not a roof-wide failure.
Here’s a specific reality for this market: Dallas hail seasons beat up the roofing around every PGT opening, and shingle replacement without re-flashing the frame is the single most common callback we get asked to fix. The flashing is only as good as the last roofer who touched it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Dallas runs $400 – $1,800 for a flashing or seal repair around a PGT opening, and climbs to $8,000 – $20,000 for a full roof replacement if the surrounding field has failed too. Tile roof repair in Dallas runs $600 – $2,500 where the PGT unit sits near a tile section. The range is driven by roof pitch, how much roofing has to come off to reach the frame, and whether the unit is on a second story.
Every quote breaks out the part, the labor and the roofing allowance in writing, so you’re not guessing where the money went. Upfront pricing, no surprises. All work is covered by our 730-Day Done Right Promise, and financing is available at 0% for 18 months.

DIY or Call Us?
You can safely check three things: photograph the jamb label, probe the exterior trim for soft wood with a screwdriver, and look for daylight or staining after the next rain. Write down what you find.
What we don’t recommend is climbing onto the roof to reseal a flashing detail yourself. Dallas roof pitches are steep, the tie-in at the frame is the exact spot where one wrong lap sends water into the wall cavity, and a fall from a two-story roof is a life-changing injury. Flashing work needs the roofing opened and re-laid in the right order, which is not a Saturday project. Our technicians have up to 12 years of experience on these tie-ins, and they carry no parts on the truck, so the part gets matched to your PGT model before the crew arrives. Call (844) 797-4808 and we’ll price it.
FAQs
A properly installed flashing seal around a PGT opening should last 10 to 15 years in Dallas. UV exposure and hail shorten that on west- and south-facing roofs, and we regularly see factory sealant fail at the 8-year mark on homes without shade.
Yes, often. If the flashing is intact and only the sealant has dried out, a reseal runs $400 – $1,800 and holds for years. If the flashing itself is bent or the wood behind it is soft, replacement is the only fix that lasts. Call (844) 797-4808 for a straight answer on which one you need.
Most flashing and seal repairs around a PGT opening are done in a single visit, usually a few hours. If roofing has to be opened and re-laid, plan on a full day. We confirm the timeline in the written quote before any work begins.
We match against the series and manufacturing date from your jamb label, then order the correct OEM or quality aftermarket part for that specific profile. That’s why we ask for the label photo first, because the rough opening measurement alone won’t tell us the frame profile.
We also work with KraftMaid, Cambria and Silestone on the interior side of these projects, so a water-damaged frame repair and the trim or cabinetry work around it can happen under one contract.
If you’ve got a leak at a PGT opening, a stain that shows up after every storm, or a draft you can’t track down, call (844) 797-4808 for a free estimate. Calls are answered by a live person 24/7, technicians arrive background-checked and in uniform, and the number you see is the number you pay. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.