Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Dallas Owner’s Guide
If your PGT fence system is failing, we install PGT-compatible fence replacement and installation for Dallas homeowners at $3,500 – $9,000 installed, and most jobs are completed in a single visit once materials are sourced. PGT is a Florida-based manufacturer best known for impact windows and doors, and its fence lines follow the same engineered-to-spec philosophy: extruded aluminum and vinyl systems built to hold up under heat, humidity, and wind load. Dallas owners usually discover a problem the same way – a gate that drops and drags, a post that wobbles after a storm, or panels that have gone chalky and brittle after a few Texas summers. That’s when they start looking for a real answer instead of a patch.

Key takeaways:
- PGT-compatible fence installation in Dallas runs $3,500 – $9,000 installed, depending on linear footage and material.
- PGT fence parts are engineered to tight tolerances, so mismatched aftermarket hardware is a common failure source.
- Texas heat and clay soil are hard on fence systems; post footings and expansion gaps matter more here than most places.
- All our fence work is covered by the 730-Day Done Right Promise.
Which PGT Models This Applies To
PGT’s fence and exterior barrier products show up across its residential lines, and the part you need depends on which system is actually in your yard. The first step is identifying what you have. PGT stamps or labels its extrusions – check the top rail, the hinge-side post cap, and the inside face of any gate for a manufacturer mark, series number, or profile code. Fence sections are frequently replaced piecemeal over the years, so a single Dallas yard can hold parts from two or three different manufacturers. Measure before you assume. Post spacing, rail thickness, and picket gauge tell you more than a faded label.
On the OEM-versus-aftermarket question, PGT is stricter than most. Its aluminum profiles and gate hardware are matched to specific dimensions, and a generic bracket from a big-box store often leaves a fraction of an inch of play that turns into a rattling gate within a season. Quality aftermarket equivalents exist and can work well, but they need to match gauge and finish, not just look close. We’re an independent service provider, not affiliated with PGT, so we match your existing system by spec rather than selling you a brand name. If you’re weighing broader exterior upgrades alongside your fence, we also work with KraftMaid, Cambria, and Silestone on interior projects.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Fence Installation Is Failing
Fence failures in Dallas rarely happen all at once. They telegraph. Here’s what to watch for and what’s actually going on underneath:
- Gate sags and drags on the ground. The hinge-side post has shifted or the hinge hardware has loosened. Clay soil movement and years of gate weight usually cause this, not the gate itself.
- Posts wobble after heavy rain or wind. The footing has degraded or was set too shallow for North Texas soil. A leaning post is a foundation problem dressed up as a fence problem.
- Panels look chalky, faded, or feel brittle. UV exposure has broken down the finish. Dallas gets intense summer sun, and a cheap finish degrades years faster than a properly extruded one.
- Rails rattle or pickets come loose. Fasteners have backed out or the rail channel has widened. This is common when a fence was assembled with mismatched hardware.
- Visible rust streaks or white corrosion at joints. Moisture is getting into unprotected cut ends or scratched finish. Left alone, it spreads along the rail.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
PGT-compatible fence installation in Dallas runs $3,500 – $9,000 installed, and that range is real – it reflects linear footage, material choice, gate count, and how much old fence has to come out first. Vinyl fence installation in Dallas also sits at $3,500 – $9,000, and aluminum fence installation at $4,000 – $10,000, so the number you land on depends on which profile matches your existing system and how much you’re replacing.
What moves you up or down the range: total linear feet, number of gates and whether they’re self-closing, post removal and re-setting, and property-line or HOA restrictions that affect fence height and placement. We quote parts and labor transparently with no-hassle upfront pricing, so the number you see is the number you pay, and every fence install is backed by our 730-Day Done Right Promise. We don’t claim to stock PGT parts or carry them on a truck – we source the right match for your system and price it honestly before work begins.
DIY or Call Us?
Some of this you can safely check yourself. Walk the fence line and note which posts are loose, measure your post spacing, photograph any manufacturer labels on rails and hardware, and check whether the gate hinges are worn or just loose. That information saves time when you call. What we’d steer you away from is re-setting posts or rebuilding gates yourself. Fence posts carry real load, and a badly set post becomes a hazard in the next Dallas windstorm – plus a torn-up footing is far more expensive to fix than to do right the first time. It’s also where most DIY fence projects go sideways: the part looks fine, the installation fails. Most jobs we handle are finished in a single visit once the right components are sourced. Call (844) 797-4808 to schedule your free estimate, and if you’re calling after hours, a live person answers – around the clock, no voicemail.
FAQs
A properly installed PGT-compatible aluminum or vinyl fence typically holds up for 15 – 20 years in Dallas, though Texas heat and UV exposure will dull the finish sooner than in cooler climates. Post footings, not the panels, are usually what determines real lifespan here. Call (844) 797-4808 if you want an honest read on whether yours is worth repairing or replacing.
Often, yes. A sagging gate or a handful of loose panels can usually be repaired, and we’ll tell you plainly when that’s the smarter spend. Replacement makes more sense when posts are failing along a whole run or the finish has degraded across the system. Call (844) 797-4808 for a free estimate, and we’ll quote both paths so you can compare.
Most PGT-compatible fence installations are completed in a single visit once materials are sourced, though larger runs or multi-gate jobs can take two. The variable is usually material sourcing, not labor. Call (844) 797-4808 to schedule a free estimate and we’ll give you a realistic timeline for your yard.
We identify your exact profile by measuring post spacing, rail gauge, and finish, then match it to a spec-compatible component – not just the closest-looking part. We’re an independent provider and not affiliated with PGT, so the match is about fit and durability, not a label. Call (844) 797-4808 and we’ll walk through what you have and what it’ll take to match it.
Fence problems in Dallas don’t fix themselves, and a wobbling post today becomes a downed panel after the next storm. We’ve been serving local communities since 2014, every technician is background-checked and arrives in uniform, and every install is covered by the 730-Day Done Right Promise – built to last, backed in writing. Right now, take $1,000 off projects over $10,000, and 0% financing for 18 months makes a full fence replacement easy to budget. Call (844) 797-4808 for your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.