Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Roofing: The Dallas Owner’s Guide
We install and repair CGI-compatible roofing for Dallas homeowners, and a full roof replacement typically runs $8,000-$20,000 while targeted roof repair lands at $400-$1,800. Storm and impact damage is the most common reason owners call. If a section of your CGI roof is failing, call (844) 797-4808 for a free estimate.

Most Dallas owners don’t find a failing CGI roof by climbing up and inspecting it. They find it from the ceiling side: a brown ring blooming on the drywall after a spring hailstorm, grit from worn shingles collecting in the gutters, or a shingle tab lying in the flowerbed after a 60-mph north wind. CGI roofing components – shingles, underlayment, flashings, and the closures that seal the system – fail in a predictable order, and knowing that order tells you whether you’re looking at a $600 repair or a full tear-off. Dallas sits in a hail belt that sees severe storms most years, so a CGI roof that’s holding up in a milder climate can still lose granules and sealant here faster than the manufacturer’s rated lifespan suggests.
Which CGI Models This Applies To
CGI residential roofing systems show up across a wide range of Dallas-area homes, from builder-grade subdivisions in Far North Dallas to older stock in East Dallas. The exact part you need is determined by the profile, the exposure, and the color code – not just by the brand name on the wrapper. Before you order anything, pull the identifying information off the roof or the original paperwork. The best source is a bundle wrapper or a starter strip still legible in the garage or attic, plus any permit paperwork filed when the roof was last replaced.
Where labels are gone, we identify the part from three physical measurements: the shingle profile (three-tab versus architectural), the exposure width (the visible height of each course once installed), and the color. Those three things narrow a CGI replacement far more reliably than a photo alone. On the OEM-versus-aftermarket decision, our default for CGI is OEM-matched product wherever it’s still produced, because mixing profiles or granule colors mid-roof shows up as a shadow line from the street and can void the system’s wind warranty. When an exact CGI replacement isn’t available, we source a like-profile equivalent and tell you plainly where it differs. We’re an independent service provider, not affiliated with CGI – which means our recommendation follows your roof, not a brand quota.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Roofing Is Failing
Here’s what actually shows up on Dallas roofs, and what each symptom means under the surface:
- Granule loss in the gutters or on the ground. Granules shed as the shingle ages, but heavy loss after a hail year in Dallas means the protective layer is thinning and the asphalt beneath is now exposed to UV. Once that asphalt dries out, the shingle cracks.
- Curling or clawing at the edges. Shingle edges that lift and curl usually point to inadequate attic ventilation – trapped heat bakes the shingles from below. It’s a roofing symptom, but the real fix often involves the attic.
- Dark water stains on ceilings or exterior walls. A stain means water has already traveled past the underlayment. The visible spot is rarely where the leak starts, so chasing it from inside is a losing game.
- Missing or lifted shingle tabs after a wind event. North Texas straight-line winds test the sealant strips hard. A lifted tab is a weak point that the next storm opens up.
- Soft spots or a spongy feel near valleys and flashings. This points to compromised decking, not just shingles. It’s the one symptom that almost always escalates the scope, because the deck has to be sound before anything goes back on top.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, a CGI-compatible roof replacement runs $8,000-$20,000 installed, and focused roof repair sits at $400-$1,800. The range is driven by square footage, roof pitch and complexity, how many layers have to come off, and whether any decking is soft and needs replacing. Upscale materials and steep, cut-up rooflines push toward the top of the range; a single-story, straightforward pitch sits near the bottom.
Our pricing is line-item and upfront: you see parts, labor, and disposal separated before work starts, and the number you see is the number you pay. When a damaged roof still has to meet the rest of the house, we also work in the same trades across other systems – CGI roofing alongside KraftMaid, Cambria, and Silestone for interiors – so a storm claim that touches more than the roof stays with one accountable contractor. Every roofing job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right.
DIY or Call Us?
There’s a fair amount you can check safely from the ground. Walk the yard after a storm and look for shingle tabs, note granule buildup in the gutters, and check your attic on a dry day for daylight or water staining on the rafters. Use binoculars from the driveway rather than climbing – a Dallas roof in summer is hot enough to soften shingles underfoot, and a fall from roof height isn’t a risk worth taking to save a diagnostic fee.
Where DIY goes wrong: homeowners patch a visible leak and the water reroutes to a hidden valley, or nail a new shingle over a soft deck that’s the real problem. That’s how a $600 repair becomes a $14,000 tear-off. When you’re ready for a real answer, call (844) 797-4808 for a free estimate – calls are answered by a live person, 24/7.
FAQs
A CGI-compatible architectural roof can hold up for roughly 20-30 years under manufacturer ratings, but in Dallas hail and UV exposure usually shorten real-world life to the lower end of that window. Granule loss from annual storm seasons is the main reason. Call (844) 797-4808 and we’ll assess your roof’s actual condition, not the sticker on the shingle.
Yes – if the damage is isolated and the deck beneath is sound, a targeted repair at $400-$1,800 is usually the right call. If the failure is widespread or the deck is soft, repair just delays a replacement. We tell you which one you’re facing before you spend a dollar.
A focused CGI roof repair is often completed in a single visit, while a full replacement typically runs one to three days depending on size, pitch, and weather. Dallas storm season can shift the schedule, so we give you a realistic window up front. Call (844) 797-4808 to book a free estimate.
We match the part to your roof by profile, exposure, and color code, then source an OEM CGI replacement where it’s still produced, or a like-profile equivalent where it isn’t. You get the sourcing detail in writing before we order.
From your first call to the final walkthrough, Groundwork Construction Co. of Dallas handles CGI roofing with upfront pricing, background-checked uniformed technicians, and the 730-Day Done Right Promise behind the work. Call (844) 797-4808 for your free estimate, and ask about $1,000 off projects over $10,000 plus 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.