Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Dallas Owner’s Guide
Replacing CWS bathroom fixtures and finishes in Dallas typically runs $9,000 – $28,000 installed, depending on how much of the room we touch and which CWS series your home was fitted with. We schedule these projects after an on-site measurement, and most single-fixture swaps are completed in one to two visits. Owners usually find out something is wrong the same way: a slow drain under the CWS vanity, a shower pan that flexes when they step in, grout that goes dark in a week, or a faucet that drips after the handle is fully closed. Groundwork Construction Co. of Dallas is an independent service provider, not affiliated with CWS, so we match parts to your actual model rather than whatever a warehouse happens to stock.

- Installed range: $9,000 – $28,000 for full CWS bathroom remodeling in Dallas; smaller single-fixture work lands at the low end.
- Common culprit: a failed wax ring, supply line, or cartridge, not the fixture itself.
- Warranty: every job carries our 730-Day Done Right Promise.
Which CWS Models This Applies To
CWS parts are not universal. The company ships fixtures across several product lines, and the same-looking vanity or shower valve can carry a different rough-in measurement, cartridge body, or drain assembly depending on the series it came from. Before we quote anything, we identify the model from the label on the back of the vanity, the underside of the sink basin, or the trim plate on the valve, then cross-check it against the CWS parts documentation for that series. Guessing by appearance is how homeowners end up with a $180 cartridge that doesn’t fit and a weekend wasted.
Once we have the model number, you get a straight choice between the OEM part and a quality aftermarket equivalent. For wear items like cartridges, supply lines, and wax rings, aftermarket is often fine and saves money. For anything structural, like a shower pan liner or a vanity cabinet panel, we recommend the OEM match so the finish and dimensions line up with what’s already in the room. We don’t stock parts and we don’t carry them on a truck, so every part is sourced specific to your model and confirmed before we schedule installation. If your bathroom also includes KraftMaid cabinetry, Cambria or Silestone surfaces, note those brands too; they need their own model identification.
How to identify your model
- Check inside the vanity door for a manufacturer sticker.
- Look under the sink rim or on the back of the faucet body.
- Photograph any label you find, even if you can’t read it all, and send it to us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
Most calls we get in Dallas start with one of these five symptoms. Each one points to a specific part:
- A drip that won’t stop when the handle is closed. This is almost always a worn cartridge or seat. The water finds its way past the seal, and the fix is the cartridge, not the whole faucet.
- Flex or softness in the shower floor. A shower pan that gives underfoot usually means the liner underneath has failed or was never set correctly. It gets worse with the clay-heavy soil movement we see across Dallas subdivisions, where a settling slab can stress the pan joints.
- Dark grout lines that come back after cleaning. Persistent grout discoloration in a Dallas bathroom usually points to moisture behind the tile, often from a failed pan or a leaking supply line, not a cleaning problem.
- Water staining or soft wood under the vanity. A failed wax ring or a loose supply connection leaks slowly. The stain on the cabinet floor is the first visible sign; the damage underneath is usually worse.
- Loose or rocking toilet base. A rocking toilet in Dallas homes typically means the flange has cracked or the subfloor has softened from a slow leak. Ignoring it lets water reach the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas homes, CWS-compatible bathroom remodeling runs $9,000 – $28,000. Smaller bathrooms land closer to $5,000 – $12,000. Here’s how the line items break down:
| Work | Installed Range |
|---|---|
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What moves the number: the number of fixtures being replaced, whether tile work is involved, whether the subfloor or framing needs repair, and how accessible the plumbing is. We quote labour and materials as one upfront number, so you’re not handed a parts bill later. Every job is covered by our 730-Day Done Right Promise, and we offer $1,000 off projects over $10,000 plus 0% financing for 18 months.
DIY or Call Us?
Some things are safe to check yourself. You can look for the model label on your vanity, trace a slow drip to the supply line or the cartridge, and clean and re-seal grout on a sound, stable pan. Plenty of Dallas homeowners find the leak themselves and save the diagnostic visit.

Others need to stop there, honestly. Anything involving the shower pan liner, the toilet flange, or a supply connection inside the wall means opening water supply and waste lines. Get it wrong and you’re looking at water damage to framing and flooring, which is money no homeowner wants to spend twice. If you’re unsure whether the floor is soft or just cold, don’t guess; have it inspected. Our team is background-checked and uniformed, and we’ll tell you plainly whether you need a repair or a replacement.
Call (844) 797-4808 and we’ll schedule a free estimate. Lines are answered by a live person, 24/7.
FAQs
A properly installed fixture with a quality cartridge and correct pan liner typically lasts 15 – 20 years. The parts that fail first are the cartridge and the wax ring, usually within 8 – 12 years. Dallas heat and humidity speed up wear on supply lines and grout, so annual checks help.
Often yes, especially for a dripping faucet cartridge or a slow toilet seal. Some repairs are straightforward swaps; others, like a compromised shower pan, usually mean full replacement once water has gotten behind the tile. We’ll tell you which you’re facing.
A single fixture swap is typically done on one visit. A full bathroom remodel with tile work takes longer, usually several days spread across scheduled visits. We confirm timing at the estimate.
We don’t keep parts in stock, so we order the exact part for your CWS model after identifying it from the label or valve trim. That way you get the right fit, not a lookalike. Call (844) 797-4808 and we’ll confirm your model and pricing.
Every Dallas bathroom we install is backed by our 730-Day Done Right Promise, every job starts with an upfront, no-surprise quote, and every technician on site is background-checked and in uniform. Call (844) 797-4808 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.