Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Fence Installation in Dallas: The Dallas Owner’s Guide
We install CWS-compatible fencing across Dallas, and most full replacements run $3,500 – $9,000 installed for a standard residential run, with materials matched to your existing CWS system. A typical fence install takes one to three days once materials are on site. Most Dallas owners discover a problem the same way: a gate that drags, a post that leans after a storm, or panels that no longer line up where they meet the house.

Key Takeaways
- CWS parts are model-specific, so the panel or gate hardware you order has to match your exact series.
- North Texas heat and clay soil are the two biggest reasons CWS fences fail here, not the fence itself.
- Installed pricing in Dallas runs $3,500 – $9,000 for a full replacement, backed by our 730-Day Done Right Promise.
Which CWS Models This Applies To
CWS builds fencing in several product families, and the hardware, post spacing, and panel config differ across them. Before you order anything, find the model tag. On most CWS runs it’s on the inside face of the gate stile or the first post cap near the gate. If the tag is gone, measure the panel height to the nearest inch and the post spacing center-to-center; those two numbers usually narrow it to one family.
OEM CWS parts are the safe match. Aftermarket equivalents exist for common items like gate hinges, latches, and post caps, and a quality aftermarket part can work fine, but you have to check the screw-hole pattern and load rating against your series or it won’t seat correctly. We source CWS-compatible components for every install and won’t swap in a part that doesn’t fit your fence line. If you’ve worked with KraftMaid, Cambria, or Silestone in other parts of your home, you already know how much model matching matters. It’s the same principle here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Fence Installation Is Failing
- Gate dragging on the ground. The hinge or post has shifted. In Dallas, clay soil expands and contracts with our wet-dry cycles, which pulls gate posts out of plumb faster than most homeowners expect.
- Leaning posts after a storm. Post footings that weren’t set deep enough or weren’t anchored in our soil give way under wind load. A single leaning post often means the footing failed, not the post.
- Panels pulling apart at the seams. Fasteners back out from thermal movement. DFW summers push fence temperatures well past 130°F, and that repeated expansion loosens hardware over a few seasons.
- Split or warped boards. UV and heat dry out wood and degrade some composite materials faster in North Texas than in milder climates. Warping usually shows up on the south and west faces first.
- Rust or corrosion at hardware. Cheap fasteners corrode in our humidity, and once a hinge or bracket rusts, it stops holding the gate square.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, CWS-compatible fence installation runs $3,500 – $9,000 installed. That covers removal of the old run, posts and footings set for our soil, panels, gate hardware, and cleanup. The range moves on fence length, material choice, terrain, and whether we’re resetting footings or working around existing landscaping.
We quote a written line-item price up front, so the number you see is the number you pay. There are no surprise add-ons once the crew is on site. Every install carries the 730-Day Done Right Promise: if something we set isn’t right, we come back and make it right. Calls are answered by a live person 24/7, and our technicians are background-checked and arrive in uniform.
DIY or Call Us?
You can safely check a few things yourself: wiggle each post by hand, look at the gate hinges for rust, and check whether the fasteners are backed out. Replacing a single hinge or latch is a reasonable DIY job if you match the part to your CWS series.

Where DIY goes wrong is the structural side. Resetting a post in North Texas clay without the right footing depth and anchoring is the mistake we fix most often. The fence leans again within a season, and you’ve spent a weekend for nothing. If a post is loose or a footer has failed, that’s the point to call us at (844) 797-4808. We’ll tell you honestly whether it’s a quick fix or a full replacement.
FAQs
A properly installed CWS fence typically lasts 10 – 20 years depending on material, with wood on the shorter end and aluminum or composite on the longer end. Our heat and clay soil shorten that vs. cooler climates, so footing quality matters more here than the fence material itself. Call (844) 797-4808 for a free estimate on your run.
Often yes. If the panels are sound and only the gate hardware or one post has failed, a targeted repair is cheaper than a full replacement. If multiple posts lean or the panels are warped, replacement is the better value. We’ll look at it and tell you which one makes sense.
A standard residential replacement in Dallas runs one to three days once materials are on site. Larger runs or tricky terrain push toward the longer end. Call (844) 797-4808 to get your timeline.
We source CWS-compatible components matched to your series and verify the fit before install. You get the right part the first time, backed by our 730-Day Done Right Promise. Estimates are free, so call (844) 797-4808 for an exact quote.
Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with CWS. When you’re ready for a straight answer on your fence, call (844) 797-4808 for a free estimate. We’ll quote the job line by line, put the price in writing, and back the work with our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.