A Groundwork company - serving Dallas, TX
C

CWS Driveway & Pavers in Dallas, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Driveway & Pavers: The Dallas Owner’s Guide

When a CWS driveway or paver surface starts failing in Dallas, replacing the damaged section typically costs $7000 – $18000 for a full paver driveway or $250 – $700 for resealing and joint repair, depending on scope. We install and repair CWS-compatible paver and hardscape systems across Dallas, and most assessments can be scheduled for the same week. Owners usually discover the failure the same way: a section of pavers lifts after a heavy rain, joints wash out, or a hairline crack spreads across the driveway after a freeze.

Two contractors framing a doorway during a residential bathroom renovation in Dallas, TX

Call (844) 797-4808

Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with CWS. We work with CWS-compatible materials and the specs that make them hold up in North Texas soil and weather.

Which CWS Models This Applies To

CWS hardscape systems are built around a few core variables: paver thickness, base preparation depth, joint sand type, and edge restraint style. Most CWS driveway installs use a 60mm or 80mm paver, and 80mm is the right call for Dallas driveways that see heavy vehicle loads and the clay-heavy soil movement common across the metroplex. Before ordering any replacement, check the paver’s underside stamp or the original install paperwork for the series name, then measure the thickness with a tape. A 60mm paver swapped into a bed built for 80mm will sit proud and rock within a season.

The OEM-versus-aftermarket decision matters more for pavers than for most parts. CWS-specific color and shape profiles can be hard to match once a production run ends, so matching the exact series is often necessary for a seamless repair. Aftermarket pavers with the same thickness and joint profile can work for full replacements where color matching is less critical. Where a match is unavailable, we source the closest profile and blend it, or replace the full field so the driveway stays consistent.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Driveway & Pavers Is Failing

  • Pavers rocking or shifting underfoot. This usually means the base layer has settled or wasn’t compacted deep enough at install. Dallas clay soil expands and contracts with moisture, and a shallow base gives way first.
  • Joint sand washing out after rain. Polymeric sand breaks down faster than expected when it wasn’t installed at the right moisture level or the joints are too wide. You’ll see sand pooling at the driveway edge after storms.
  • Efflorescence (white haze) on the surface. This is mineral salt wicking up through the paver, often tied to poor drainage or a base that stays wet. It’s cosmetic at first but signals a moisture problem underneath.
  • Cracks in individual pavers or along the edge. Freeze-thaw cycles in Dallas stress pavers that weren’t rated for it, and edge restraints that weren’t spiked properly let the border spread.
  • Uneven sections or ponding water. Standing water after rain points to lost slope or a settled base. Left alone, it accelerates the failure and can push water toward the foundation.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Dallas, a full paver driveway installation runs $7000 – $18000, and concrete driveways run $4500 – $12000. A targeted replacement of a failed section runs $5000 – $14000, and resealing with joint repair is $250 – $700. What drives the range: total square footage, paver thickness and profile (80mm costs more than 60mm), how much base has to be removed and rebuilt, and whether edge restraints need replacement. We provide upfront pricing with a written line-item quote, so the number you see is the number you pay. Labor and materials are itemized, permits are pulled where required, and all work is covered by our 730-Day Done Right Promise.

Service Dallas Price Range
Paver driveway installation $7000 – $18000
Concrete driveway installation $4500 – $12000
Driveway replacement $5000 – $14000
Driveway sealing $250 – $700
Paver patio installation $3500 – $11000

DIY or Call Us?

You can safely check a few things yourself: whether pavers rock when you step on them, whether joints are missing sand, whether water ponds after rain, and whether the edge restraints are loose. Pulling up a paver to inspect the base is where it gets risky, because a paver bed is a system and one disturbed section can loosen the whole field. Rebuilding a base to the right depth and compaction is not a weekend job, and improper base work is the number one cause of repeat failure. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. Call (844) 797-4808 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch