A Groundwork company - serving Dallas, TX
E

ES Windows Fence Installation in Dallas, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Fence Installation: The Dallas Owner’s Guide

ES Windows fence installation in Dallas runs $3,500 – $9,000 installed, and most jobs are scheduled within a week of your free estimate. Fence work tied to an ES Windows product is rarely an emergency, so we plan it like a build, not a rescue. Homeowners usually find the problem slowly: a gate that drags by an inch each month, a fence line that tilts after a storm, or panels pulling loose at the posts. By the time it’s obvious, the post footings have usually been moving for a season or two.

Contractor using a level to install bathroom wall tile in Dallas, TX

Call (844) 797-4808

Which ES Windows Models This Applies To

ES Windows makes windows, doors, and outdoor products, and the fence-related pieces we see in Dallas fall into a few clear groups: outdoor gate and fence hardware supplied with ES Windows patio and entry door packages, screen and storm door fencing accessories, and decorative fencing components sold through the same dealer channel. The part is almost never the fence itself; it’s the arm, hinge, latch, or mounting component that ties your ES Windows product to the fence line.

To match the right piece, find the model sticker on the frame or door jamb (usually an etched or printed label with a series code and dimensions). Measure the hinge spacing and the gate stile width to the nearest 1/16 inch. Then call us with those numbers.

The OEM-versus-aftermarket call is the one that trips people up. For ES Windows-specific hardware, OEM parts typically fit exactly and preserve any factory warranty on the door or window, but they cost more and arrive slower. Quality aftermarket equivalents work fine for standard hinge and latch geometry, but the fit tolerance is narrower on older ES Windows series. If we go aftermarket, we measure and test-fit before committing.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Fence Installation Is Failing

Here’s what Dallas homeowners actually tell us on the phone, and what’s usually going on underneath:

  • Gate sagging and scraping the ground. The lower hinge has worn or the post footing has settled in our expansive clay soil. Both show up first on the latch side.
  • Latch not catching or popping open in wind. The striker plate has shifted, or an ES Windows-specific latch has lost spring tension. Latch geometry loosens with every season of thermal expansion.
  • Panels racking out of square. Post movement, not panel failure. Once a post tilts a few degrees, the whole run behind it follows.
  • Rust streaks or pitted hardware. Our summer humidity and spring storms eat through cheap finishes fast. Pitting at hinge pivots is the leading cause of gate binding.
  • Hardware pulling out of the frame. Fastener holes elongate when a component has been loose for months. Catch this early and it’s a re-secure; wait and it’s a rebuild.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Most ES Windows fence installation replacements in Dallas land between $3,500 and $9,000 installed. Here’s what drives the number:

  • Linear footage and gate count. A single gate refresh sits near the bottom; a full perimeter rebuild with two gates pushes toward $9,000.
  • Material. Vinyl runs $3,500 – $9,000; aluminum runs $4,000 – $10,000 for the same layout.
  • Parts mix. OEM vs aftermarket, and how many components get replaced versus reused.
  • Site conditions. Post replacement in rocky ground or tight lots adds labor.

You get a written line-item quote before we start: parts, labor, disposal, permits if any apply. No-hassle upfront pricing means the number you see is the number you pay. Every job carries our 730-Day Done Right Promise, and financing is available at 0% for 18 months.

DIY or Call Us?

Some things you can handle. Some you shouldn’t touch.

Safe for a homeowner: tightening loose fasteners, lubricating hinges and latches, checking post plumb with a level, and photographing model stickers before you call.

Where DIY goes wrong: setting or resetting post footings (depth and concrete specs matter in Dallas clay, and a shallow post moves again within a season), replacing hinges on a loaded gate, and matching ES Windows-specific hardware without the model code. Get the code wrong and the part won’t fit, or fits badly and fails in months. For anything involving structural post work or a full hardware swap, call us. We’re an independent service provider, not affiliated with ES Windows. Call (844) 797-4808 to schedule your free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch