Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Dallas Owner’s Guide
Bathroom remodeling in Dallas with ECO Window Systems products typically runs $9,000 – $28,000 for a full bathroom, and smaller rooms land around $5,000 – $12,000. We’re an independent Dallas contractor that works with ECO Window Systems shower enclosures, glass, and window systems every week, and it’s a coordinated project, not a same-day swap. Most owners start noticing trouble the same way: a shower door that drags or won’t stay closed, fog between glass panes, a seal that beads water, or a frame that’s pulling away from the tile after a Texas summer. We schedule these as planned projects and walk you through the whole scope before anything is ordered.

ECO Window Systems is a real name in Dallas bathroom glazing, and the parts are specific to the series. We’re independent from ECO Window Systems, which means we’re not locked into one catalog and we can tell you honestly when a compatible component is the smarter buy than a factory piece. KraftMaid, Cambria, and Silestone products round out plenty of these Dallas bathrooms when the project grows past glass and enclosures.
Which ECO Window Systems Models This Applies To
ECO Window Systems bathroom products break down into a few families: framed and semi-frameless shower enclosures, sliding and pivot shower doors, and bathroom window systems built for privacy or tempered glazing. The single most important thing before we order anything is matching the series, because hinge centers, panel dimensions, and frame profiles change between generations. Two enclosures can look identical in a Dallas showroom and take completely different hardware.
Here’s how to identify yours. Find the manufacturer label – usually on the door’s top rail, inside the frame channel, or on the fixed panel’s edge – and photograph it along with a tape measure held against the opening width, height, and glass thickness. Glass on bathroom enclosures is commonly 3/8 inch (10 mm) or 1/2 inch (12 mm), and mixing those up is the most common ordering mistake we see. If the label is gone, measure the hinge spacing and the door’s sweep.
On the OEM-versus-aftermarket call: OEM is the safe route when the enclosure is under a decade old and you want a visual match. A quality aftermarket equivalent often makes more sense for older Dallas units where the original series is discontinued or the price has climbed. We quote both so you can see the difference in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
Bathroom glass and enclosure failures show up early if you know what to look for. Here are the five we see most in Dallas homes:
- Water pooling outside the shower. A worn sweep or degraded seal lets water past the threshold. Dallas’s hard water accelerates mineral buildup that dries out and cracks the seal faster than most owners expect.
- Door drags, sags, or won’t latch. Hinge wear or a loosened pivot. On framed units it’s often the hinge screws backing out of the frame; on frameless units the hinge cartridge itself is shot.
- Fog or condensation between panes. The sealed unit’s moisture barrier has failed. This one can’t be cleaned off – the glass assembly has to be replaced.
- Frame pulling away from the wall or tile. Usually a caulk and mounting failure, sometimes movement in the surrounding wall. Left alone, it invites water behind the tile and real water damage.
- Cloudy, etched, or scratched glass. Mineral deposits and years of cleaning products etch the surface. In Dallas’s water, this happens faster than owners in softer-water cities are used to.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Dallas bathroom work tied to ECO Window Systems components depends on scope. For context, a full bathroom remodel runs $9,000 – $28,000, a small bathroom remodel $5,000 – $12,000, a walk-in shower installation $4,500 – $12,000, a tub-to-shower conversion $3,500 – $10,000, a shower replacement $3,000 – $8,500, and a bathroom vanity installation $800 – $3,000.
What drives the range: glass thickness and tempering, frameless versus framed, demolition and disposal, tile repair around the opening, and whether the wall behind the old unit needs rebuilding. We quote parts and labor line by line, so you see the component cost and the installation cost separately. Upfront pricing, no surprises – the number you see is the number you pay. Every project is covered by our 730-Day Done Right Promise, and we pull permits where Dallas code requires them.
DIY or Call Us?
Some checks are safe and smart to do yourself. Look for the manufacturer label, measure the opening, clean the tracks, and re-caulk a small gap. That’s it for hands-on work.
Here’s where DIY goes wrong: tempered glass shower panels weigh 80 to 100 pounds and more, and a dropped panel shatters into thousands of pieces. A frameless door reinstalled with the wrong anchor type can fail months later without warning, and the wall behind it may already be wet. If a sealed unit has gone foggy, there’s nothing to fix at home – the glass assembly is replaced, period. When in doubt, call us at (844) 797-4808 and we’ll tell you straight whether it’s a repair or a replacement. Estimates are free.
FAQs
Plan on 10 to 15 years for the enclosure hardware and seals, and 15 to 20 for a sealed glass unit, with Dallas heat, humidity swings, and hard water all pushing toward the shorter end. Sweeps and seals wear out first; hinges and rollers follow. Call (844) 797-4808 for an exact assessment and free estimate.
Often, yes. Hinges, rollers, sweeps, seals, and frameless-door hardware are replaceable, and that’s frequently the honest answer. Fogged sealed glass units can’t be repaired – only replaced. We’ll tell you which situation you’re in before quoting anything. Call (844) 797-4808 for a free estimate.
A shower door or hardware swap is usually a single-day job. A full enclosure replacement or a bathroom remodel involving glass, tile, and windows runs several days to a couple of weeks, depending on scope and material lead times. We schedule it as a planned project and confirm dates up front. Call (844) 797-4808 to get yours on the calendar.
We start from the series label and exact measurements, then request the OEM component and a compatible aftermarket quote side by side. We’re an independent contractor, not affiliated with ECO Window Systems, so we show you both and let you choose based on fit, look, and budget. Call (844) 797-4808 for a free estimate and design consult.
Key takeaways: match the series and glass thickness before ordering, treat fogged sealed glass as a replacement not a repair, and let us quote OEM and aftermarket parts in writing so there are no surprises.
Ready to stop guessing and get a real number? Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free project estimate and design consult. Live person, 24/7. We’re proud to serve Dallas and nearby communities, and our technicians bring up to 12 years of experience to every job – built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.