A Groundwork company - serving Dallas, TX
E

ECO Window Systems Fence Installation in Dallas, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ECO Window Systems Fence Installation: The Dallas Owner’s Guide

Fence installation tied to an ECO Window Systems project in Dallas typically runs $3,500 to $9,000 installed for standard residential runs, depending on linear footage, material, and gate count. We schedule these as planned work, usually within one to two weeks of an approved estimate, not as same-day emergency calls. Most Dallas owners find us the same way: a fence line that was fine last summer is now leaning after a storm, a gate that drags on the driveway, or posts that have started to shift in the clay. When the fence is the last piece tying an exterior project together, getting the install right the first time matters more than saving a few hundred dollars on a crew that won’t come back.

Two professional contractors installing a new white exterior entry door in Dallas, TX

Call (844) 797-4808

Key Takeaways

  • Installed fence runs for Dallas properties generally land between $3,500 and $9,000.
  • Post depth and concrete matter more in Dallas soil than the panel material itself.
  • We’re an independent contractor, not affiliated with ECO Window Systems.
  • Every job is backed by our 730-Day Done Right Promise.

Which ECO Window Systems Models This Applies To

ECO Window Systems is primarily a window and door manufacturer, so a “fence installation” on a Dallas property isn’t a factory component you order by model number. What owners are actually looking for falls into two buckets: fencing that coordinates with an exterior window or door project (matching sightlines, property line layout, and gate placement around new openings), and a standalone fence replacement on a home that already has ECO Window Systems windows or doors installed.

Either way, there’s no part label to track down. Instead, we identify scope by measuring the actual property line and reviewing the plat survey, then confirming gate swing and clearance against the door and window locations on the home. That’s the compatibility gotcha most Dallas owners miss: a gate placed without checking door swing on a newly installed exterior door can foul the panel within a season.

On the OEM-versus-aftermarket question, the honest answer is that fencing materials aren’t proprietary to any window brand. We source panels, posts, and hardware from verified suppliers, and we don’t claim to carry ECO Window Systems-branded fence parts, because none exist. What we do carry into every Dallas job is a documented material spec and a written warranty on the install.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ECO Window Systems Fence Installation Is Failing

Fence failures show up in predictable order. Here’s what we see on Dallas properties and what’s usually behind each one:

  • Leaning posts after heavy rain. Dallas’s expansive clay soil swells when wet and shrinks when dry, and a post set too shallow or without proper concrete will rock loose within a couple of seasons. Once a post moves, the whole run follows.
  • Gate dragging or sagging. Usually a hinge or post issue, not the gate itself. A post that’s shifted even a quarter inch throws the gate out of square, and the drag gets worse every month.
  • Rot at the base of wood posts. Dallas humidity and sprinkler overspray accelerate decay at the ground line, which is exactly where you can’t see it until the post fails.
  • Loose or missing pickets after wind events. North Texas straight-line winds and spring hail loosen fasteners and pop pickets. If fasteners are backing out repeatedly, the panel spacing or fastener spec is wrong for the material.
  • Rust streaks on metal panels or hardware. Cheap fasteners and untreated cut edges rust first. On a Dallas fence, that usually means the hardware wasn’t rated for the exposure.

Replacement Cost & What’s Included

For Dallas, fence installation runs $3,500 to $9,000 installed. The range is driven by linear footage, material choice, terrain, gate count, and whether old fencing needs removal and haul-off. Here’s how that breaks down:

  • Vinyl fence installation: $3,500 to $9,000
  • Aluminum fence installation: $4,000 to $10,000
  • Removal and disposal of old fencing: quoted as a line item, never buried in the total

You get an upfront, line-item quote before any work starts – the number you see is the number you pay. Every install is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months on qualifying work.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely handle the inspection side yourself. Walk the line and check for post wobble, probe the base of wood posts with a screwdriver to test for softness, and confirm the gate swing clears any doors or window openings. That’s useful information to have before you call anyone.

Where DIY goes wrong is post setting. Getting depth, concrete volume, and drainage right on Dallas clay is the whole ballgame, and a fence that looks fine in October can be leaning by March. We pull the specs and set posts to depth so the fence holds. If you’re weighing a self-install, call us first for a free estimate – (844) 797-4808 – so you’re comparing apples to apples. Calls are answered by a live person, 24/7.

FAQs

Get Your Free Fence Estimate

If your fence is leaning, sagging, or due for a full replacement, we’ll walk the line with you, measure it out, and put a firm number in writing. Call (844) 797-4808 to schedule your free estimate. Live person, 24/7, and the number you see is the number you pay.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch