A Groundwork company - serving Dallas, TX
M

Mr-Glass Kitchen Remodeling in Dallas, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Kitchen Remodeling: The Dallas Owner’s Guide

We install kitchen projects in Dallas built around Mr-Glass components, and a full kitchen remodel runs $14,000 – $45,000 installed, with most jobs completed in a single visit for individual component fixes. Mr-Glass is a kitchen and bath product line known for modular cabinetry, door fronts, and imported component systems, so when something fails it’s rarely the whole kitchen. Dallas owners usually notice it the same way we do: a drawer that won’t close flush anymore, a hinge that groans every time the door swings past 45 degrees, or a cabinet front that has started to delaminate near the sink where steam collects. It starts small and then one morning the door drops off its bracket.

Two construction workers installing a wooden fence with power tools in Dallas, TX

Call (844) 797-4808

Key Takeaways

  • Installed kitchen remodel pricing in Dallas: $14,000 – $45,000, with cabinet installation alone at $4,000 – $13,000.
  • Mr-Glass hinges and drawer slides are the parts that fail first; cabinet boxes and solid doors usually outlast them by a decade or more.
  • We’re an independent service provider, not affiliated with Mr-Glass, so we can match compatible parts without a manufacturer backlog.
  • Every job is backed by our 730-Day Done Right Promise, and your call is answered by a live person 24/7.

Which Mr-Glass Models This Applies To

Mr-Glass kitchen product lines run across several series, and the fitment differences matter more than most homeowners expect. The door and drawer hardware on earlier series uses a screw-on European-style hinge pattern with a specific cup bore, while later series moved to clip-on hinges with a different mounting plate. Get the plate wrong and the door won’t sit square no matter how carefully you adjust it. The right part starts with the right label: check the inside of the cabinet door, the underside of the drawer box, or the model sticker inside the cabinet frame. Measure the door thickness (most run 16mm to 19mm), the cup bore, and the overlay before you order anything.

For Mr-Glass specifically, OEM parts are the safe route when the piece is visible or load-bearing, like a matched door front or a corner cabinet panel. For internal hardware like hinges and slides, a quality aftermarket equivalent from a recognized European hardware brand fits the same bore pattern and often outlasts the original. We compare part numbers against the model label before we order, and we tell you upfront which route is cheaper and which holds up longer in a Dallas kitchen. If you’re mixing brands, we also service KraftMaid, Cambria, and Silestone installations alongside Mr-Glass.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Kitchen Remodeling Is Failing

Most Dallas owners don’t call about a part. They call about a symptom. Here’s what those symptoms usually mean.

  • Doors that won’t stay closed or swing open on their own. The hinge spring has lost tension or the mounting plate has stripped out of the cabinet frame. Common after eight to ten years on a door that gets opened twenty times a day.
  • Drawers that stick, squeak, or drop at the front edge. The slide has worn its runner track or the drawer box corner has loosened. In Dallas humidity swings from spring storms to August dry heat, the wood box expands and contracts and the slide loosens faster than it would in a stable climate.
  • Delamination or bubbling on cabinet fronts near the sink or range. Heat and steam have worked under the laminate or veneer edge. Once moisture gets behind the front, the bond won’t hold, and patching it is a losing game.
  • Sagging shelves or a cabinet frame that’s pulling away from the wall. The mounting screws have backed out or the frame has warped. This one affects load-bearing cabinet structure and is worth a professional look.
  • A soft or spongy countertop edge or backsplash seam. Water has gotten behind the caulk line. Left alone, it reaches the substrate and turns a $800 – $2,500 backsplash job into a countertop and cabinet repair.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Mr-Glass-compatible kitchen work in Dallas follows the ranges below. The number you see is the number you pay, and the quote is written line-item so you can see what’s parts and what’s labor.

Scope Installed Range (Dallas)
Full Kitchen Remodel $14,000 – $45,000
Small Kitchen Remodel $9,000 – $20,000
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000

What drives the range: door count and front style, whether the cabinet boxes stay or get replaced, countertop material (quartz and granite sit at the top, laminate at the bottom), and whether plumbing or electrical has to move. We pull permits where Dallas code requires them and pass inspection before we call the job done. Every job is covered by our 730-Day Done Right Promise, if it’s not done right, we make it right.

DIY or Call Us?

You can safely check a few things yourself. Open and close each door slowly and watch where it binds. Look at the hinge plate screws, but know that re-tightening into a stripped hole doesn’t fix it for long. Measure the cupboard bore and overlay so you have real numbers when you call. What you shouldn’t do: yank out an under-sink cabinet base to look for water damage without shutting off the supply, or start pulling countertops to check a seam. Countertop and cabinet removal is heavy, sharp, and easy to crack. We install Mr-Glass-compatible parts and full kitchen builds across Dallas with background-checked, uniformed technicians on every job. Call (844) 797-4808 to schedule your free estimate, and if it’s after hours, a live person still picks up.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch