A Groundwork company - serving Dallas, TX
M

Mr-Glass Bathroom Remodeling in Dallas, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Bathroom Remodeling: The Dallas Owner’s Guide

We install Mr-Glass-compatible bathroom remodeling for Dallas homeowners, with typical whole-bath projects running $9,000 to $28,000 installed. If your Mr-Glass fixture is fogging, leaking at the seal, or the frame has loosened, those are the failures we see most in Dallas bathrooms. Owners usually notice the problem in stages: a cloudy mirror or glass panel that won’t clear, water tracking behind a caulk bead, a shower door that drags or won’t latch, or a seal that gives out after a Texas summer. Call (844) 797-4808 and a live person picks up, day or night.

Two construction workers installing wooden roof trusses for a home addition in Dallas, TX

Call (844) 797-4808

Which Mr-Glass Models This Applies To

Mr-Glass builds across several bathroom lines: framed and frameless shower enclosures, pivot and sliding shower doors, vanity mirror sets, and glass shelving and partition pieces. The identification step matters more than most homeowners expect. The part number is usually on a label inside the door channel, on the bottom edge of the frame, or stamped on the hinge plate itself. If the label is gone, we measure the glass thickness (typically 3/8 inch on frameless enclosures, 1/4 inch or 3/16 inch on lighter framed units), the pivot hole spacing, and the panel width. Those three numbers sort most Mr-Glass models into the right parts family.

On the OEM-versus-aftermarket call, here’s the honest version. OEM Mr-Glass parts give you a guaranteed fit for your exact model year and finish, and that’s usually worth it when the part has a moving mechanism or a specific extrusion profile. Quality aftermarket equivalents make sense for standard items like seals, sweeps, bumpers, and rollers where tolerances are looser and the savings are real. For a Dallas bathroom remodel where the glass itself is being replaced, we’re not matching a single part – we’re sizing a whole new enclosure to the existing opening, which opens up more choices without a compatibility headache.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Bathroom Remodeling Is Failing

These are the failure patterns we see time and again in Dallas bathrooms:

  • Glass that stays cloudy no matter how often you clean it. Hard water and Dallas’s mineral-heavy supply etch the surface over time, and once the mineral film bonds to the glass the haze is permanent, not a cleaning problem.
  • Water on the floor after every shower. The door sweep or bottom seal has hardened or shrunk, so water runs under the panel instead of back into the shower.
  • A door that drags, sticks, or won’t close flush. The rollers, pivots, or hinges have worn or the header has loosened from the wall, and the door has dropped out of square.
  • Caulk that keeps peeling or mold returning. The seal behind the caulk line has failed, so moisture gets in behind it and the bead lets go within weeks.
  • Rattling or shifting glass panels. The mounting brackets or wall anchors have loosened, often because the wall framing behind them wasn’t blocked properly on the original install.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Whole-bath remodeling in Dallas runs $9,000 to $28,000, and a smaller bathroom lands in the $5,000 to $12,000 range. If the project is really about the glass, here are the more specific numbers:

Project Installed Range in Dallas
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement (glass and surround) $3,000 – $8,500
Bathroom vanity installation $800 – $3,000
Full bathroom remodel $9,000 – $28,000

What moves you within a range: glass thickness and frameless versus framed construction, tile work, whether plumbing has to be relocated, and the size of the opening. Our quotes are written line by line, so you see the parts and the labor separately. Upfront pricing means the number you see is the number you pay – no change orders after the drywall is open. Every job is backed by the 730-Day Done Right Promise, and we’ll stand behind the workmanship in writing.

Two construction workers installing wooden roof trusses for a home addition in Dallas, TX

DIY or Call Us?

You can safely handle the checks: look for the model label, measure your glass thickness and pivot spacing, and note where the leak or drag is happening. What you shouldn’t tackle yourself is the structural side – removing a glass panel, re-anchoring a frame into wall studs, or resetting a pivot door on a frameless enclosure. Tempered shower glass doesn’t crack politely; it releases into a few hundred pieces when it’s stressed wrong, and a door that falls off a loosened hinge can cause real injury. We send background-checked, uniformed technicians who install to spec and leave the caulk lines clean. If you’re unsure which part is failing, call (844) 797-4808 and we’ll walk you through it. The estimate and design consult are free.

FAQs

How long does a Mr-Glass shower enclosure last in Dallas? Expect roughly 10 to 15 years for a well-maintained enclosure, but Dallas’s hard water speeds up surface etching and seal wear, so many homeowners replace the glass and seals sooner. If yours is past 10 years and fogging, replacement is usually the better spend than repair. Call (844) 797-4808 for an exact quote – estimates are free.

Can it be repaired instead of replaced? Small parts almost always can – sweeps, seals, rollers, and pivots are replaceable on their own. The glass itself can’t be repaired once it’s etched or chipped. We’ll tell you straight which side of that line you’re on before any work starts.

How long does the swap take? A seal or hardware swap is often done in a single visit. A full enclosure or shower replacement usually takes one to three days depending on tile work and plumbing. We’ll give you the schedule in your written quote.

How do you source the part? We measure your Mr-Glass model, match it to the correct OEM part or a quality aftermarket equivalent, and order it against your opening – we don’t guess on fit. We also work with KraftMaid, Cambria, and Silestone for the surrounding vanity and surface work if your bathroom remodel goes beyond the glass.

Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Mr-Glass. If your Mr-Glass bathroom fixture is failing, call (844) 797-4808 for a free estimate. Calls are answered by a live person 24/7, technicians have up to 12 years of experience, and projects over $10,000 come with $1,000 off plus 0% financing for 18 months. From the first call to the final walkthrough, we build it to last and back it in writing.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch