Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Dallas Owner’s Guide
We build and finish Mr-Glass-compatible home additions and ADUs in Dallas, and a typical addition runs $45,000 – $130,000 installed, with detached ADUs at $90,000 – $220,000. This is planned construction, so a full addition takes weeks to months, not a single visit. As an independent contractor, we are not affiliated with Mr-Glass. Owners usually land on this page when the Mr-Glass window, sliding door, or glazed wall package they specified for a Dallas addition shows the first trouble: a sash that won’t seat, fog between the panes, or water tracking in at the sill after a summer storm.

Key Takeaways
- A finished Dallas home addition is a $45,000 – $130,000 project; a detached ADU is $90,000 – $220,000.
- Most Mr-Glass failures we see are glazing, seal, or hardware problems, not framing.
- Fogged glass and a wet sill are the two earliest warnings to catch.
- Every project is backed by our 730-Day Done Right Promise.
Which Mr-Glass Models This Applies To
Mr-Glass puts its series and model codes on a manufacturer label, and that label is the single most useful thing you can hand us. Look on the inside face of the window sash, the door jamb, or the head track of a sliding unit. It usually lists the series name, the model or unit number, the glazing type, and the date it was built. A photo of that label plus a tape measure across the glass and the frame tells us almost everything we need to quote the right replacement.
Where owners get stuck is sizing. Mr-Glass frames a given series within a set of standard rough openings, but Dallas additions are frequently built to custom dimensions, and the “same size” window you order online can come back a quarter-inch off in the width and refuse to seat. We measure the rough opening, not the old unit, and we match the glazing designation to what Dallas heat actually demands: a low-e coating and argon fill matter here on west and south walls, and a builder-grade clear pane will cook a room by August. On the OEM-versus-aftermarket question, an exact Mr-Glass replacement is the safe route when the unit is still in production and the label is legible. When a series has been discontinued or the lead time runs long, we spec a matched aftermarket glazed unit at the same rough opening with equal or better solar performance and note the change in writing. Either way, you get a written line-item quote before anyone orders a part. If your project also touches cabinetry or stone, we handle KraftMaid, Cambria, and Silestone on the same job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
Here is what a failing Mr-Glass glazed unit or door actually looks like in a Dallas home:
- Fog or haze between the panes. The sealed unit’s edge seal has failed and moisture has entered the air space. Once it’s cloudy, the seal cannot be restored, only replaced.
- Water staining or soft wood at the sill. This is a flashing or sealant failure more than a glass failure. Dallas’s spring downpours and north-Texas hail find every gap, and a sill that stays wet will rot a subfloor before you notice it inside.
- A sash or door that won’t latch or slides hard. Usually worn rollers, a failed hinge, or a frame that has racked after the addition settled. Hardware is often the first thing to go and the cheapest to fix.
- Drafts or condensation on the inside of the glass in winter. A sign the unit’s thermal performance has dropped, often from a failed seal or a frame that’s no longer tight to the rough opening.
- Visible cracks in the glass or a sticky, discolored weatherstrip. Texas UV breaks down weatherstripping fast. A cracked pane is a safety issue and should be addressed before the unit is used.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas homeowners, here is where the money lands on the projects this page covers:
| Project | Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Window Replacement (glazed units within the addition) | $4,500 – $15,000 |
| Impact Window Installation (storm-rated units) | $8,000 – $25,000 |
What drives a home addition into the top of the range is square footage, foundation work on Dallas’s expansive clay soils, and the glazing package itself, since a wall of Mr-Glass units costs more than a few punched windows. Your quote separates the glazed units from the framing, finish, and labor, so nothing hides in a lump sum. The number you see is the number you pay, and every project carries the 730-Day Done Right Promise.
DIY or Call Us?
Some things you can safely check yourself. Read the Mr-Glass label, measure the rough opening, photograph the fogging or the wet sill, and test whether the sash is binding on the track. Where it turns dangerous or wasteful is the swap itself. A large glazed addition unit is heavy, awkward, and easy to drop, and setting a window or sliding door wrong on a Dallas clay-soil foundation means water intrusion you won’t see for a season. Getting the flashing and sealant right is the whole job, and it’s where most homeowner installs fail. For the framing, structural openings, and finish work on an addition or ADU, that’s permit-and-inspection territory and not a weekend project. Call (844) 797-4808 and we’ll tell you straight what’s worth doing yourself and what isn’t.
FAQs
How long does a Mr-Glass window or door unit last in Dallas? A properly installed sealed glazed unit typically holds its seal for 15 to 20 years, but Texas sun and hail push the lower end. West-facing units and any with a compromised seal tend to fog sooner. Call (844) 797-4808 for an exact quote on replacement – estimates are free.
Can a fogged Mr-Glass unit be repaired instead of replaced? No. Once the edge seal fails and moisture enters the air space, the insulated glass unit has to be replaced. Hardware and weatherstrip can be repaired, but fogging cannot. Call (844) 797-4808 and we’ll confirm whether you need a full unit or just the IGU.
How long does the swap take? An individual window unit is usually a single visit. A sliding-door or glazed-wall package within an addition takes longer and depends on the unit and the opening, which we confirm in your written quote. Call (844) 797-4808 to schedule your free estimate.
How do you source the Mr-Glass part? We start from the label and the measured rough opening, then match an exact Mr-Glass replacement if the series is in production, or spec a performance-matched aftermarket unit and note the substitution in writing. Call (844) 797-4808 and we’ll walk you through what fits your model.
Whether you’re pricing a full Dallas home addition, converting a garage, or replacing the glazed units inside one, call (844) 797-4808 for a free estimate. We answer with a live person, 24/7, and you’ll get no-hassle upfront pricing, a written line-item quote, and the 730-Day Done Right Promise behind the work. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.