A Groundwork company - serving Dallas, TX
T

Therma-Tru Windows & Doors in Dallas, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Windows & Doors: The Dallas Owner’s Guide

We install and service Therma-Tru-compatible windows and doors across Dallas, with a typical whole-entry or multi-unit window project running $4,500 – $15,000 installed, and impact-rated window work at $8,000 – $25,000. Single-component swaps, like a failed sill, hinge, or weatherstrip, are common and usually scheduled within the week rather than the same day. Therma-Tru is a brand, not a model, so the first thing we do is find out exactly what you have.

professional roofing service in Dallas, TX

Call (844) 797-4808

Owners usually find us the same way. A door starts dragging on the threshold in August. The weatherstrip pulls loose after a storm and you can see daylight at the corner. A window sash won’t stay up, or the lockset on a fiberglass entry won’t latch without a shove. Sometimes it’s simpler: the glass fogs from the inside, or the frame is chalky and the paint won’t hold. Each of those points to a specific part, and matching the part is most of the job.

Which Therma-Tru Models This Applies To

Therma-Tru’s door lines include Smooth-Star and Classic-Craft for fiberglass entries, Fiber-Classic and Fiber-Classic Oak for woodgrain looks, and the Profiles and Pulse series for newer builds. Window and patio-door hardware varies more, because the company has sourced different hinges, sills, and thresholds across production years. The good news is most parts aren’t tied to a single model line. They’re tied to a rough opening size and a hardware family.

Find your model two ways. On doors, look for a sticker on the hinge edge of the slab or a label on top of the frame; on windows, check the head jamb or the sash edge. If the sticker is long gone, measure the rough opening and the slab or sash thickness. A 36-inch door isn’t always a true 36; older Dallas homes frequently have openings that don’t square to the nominal size, and that’s the single biggest compatibility gotcha we run into.

OEM parts give you an exact fit and match the original finish. Quality aftermarket equivalents (sills, weatherstrip, rollers, hinges, multipoint hardware) often cost less and hold up just as well, and for discontinued parts they’re sometimes the only option. We tell you which is which and why before we order. We also handle KraftMaid, Cambria, and Silestone on other projects. We’re an independent contractor and not affiliated with Therma-Tru.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Windows & Doors Is Failing

  • The door drags or won’t latch cleanly. Usually a sagging hinge or a threshold that’s settled, not a bad slab. Left alone, the drag wears the finish off the strike edge and warps the frame over time.
  • Daylight or a draft at the corners. Failed weatherstrip, a loose sill, or a frame that’s out of square. In Dallas this shows up hard the week after a summer storm, when we get a run of calls about air and water coming in at the bottom corner.
  • Fogging inside the glass. The seal in the insulated glass unit has failed and moisture is trapped between the panes. The sash or unit gets replaced; the frame usually stays.
  • A window sash that won’t stay up. Worn balance or a broken sash spring. These parts are model and weight specific, so a mismatched replacement fails fast.
  • Chalky, peeling, or warped frame edges. Texas sun and heat cycling break down finishes faster than most owners expect. Once the edge seal goes, moisture gets in and the frame starts to move.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Dallas pricing, installed, with parts and labor together and no change orders after the fact:

Work Typical installed range
Window replacement (whole project) $4,500 – $15,000
Impact window installation $8,000 – $25,000
Single component (sill, weatherstrip, hinge, sash, hardware) Quoted line-item, parts plus labor

The range is driven by unit count, size, whether the opening has to be reframed, and impact rating. A single failed component on a sound door or window is a modest line-item quote; a full window replacement is a project. You get the parts cost and the labor cost separately, in writing, so you can see what you’re paying for. Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise. Upfront pricing, no surprises.

DIY or Call Us?

Some things you can check safely. Run a flashlight along the closed door edge to spot daylight. Feel for drafts at the corners. Look at the finish on the frame for cracking or oil-canning, and check that the lockset lines up without force. If the problem is a worn part you can identify and reach, and you’re comfortable with a screwdriver, weatherstrip and some hardware is genuinely doable.

Where DIY goes wrong: window and patio-door balancing, sash and hinge swaps on fiberglass slabs, and anything that requires the door or window to come out of the opening. These are heavy assemblies, and a glass unit or slab that slips is a real injury risk and a broken part you didn’t have. Get the model right and the part matches. Get it wrong and you’re out the cost of the part and still have the problem. Call (844) 797-4808 and we’ll help you sort which side of the line you’re on.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch