Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Dallas Owner’s Guide
Installing Therma-Tru-compatible fence systems in Dallas typically runs $3,500 – $9,000 for a standard residential yard, and most jobs are completed in a single visit. Fence installation is generally planned work, so we schedule it rather than promise same-day service. Owners usually discover a fence problem the hard way: a gate that sags and drags on the ground, posts that lean after a North Texas storm, or pickets that start wobbling at the fasteners. By the time you notice it, the underlying issue has usually been working on the fence for a season or two.

Key takeaways before you read further:
- Therma-Tru-compatible installs in Dallas sit at $3,500 – $9,000 installed, all-in.
- Most jobs finish in one visit. We’re an independent installer, not affiliated with Therma-Tru.
- Every project is backed by our 730-Day Done Right Promise.
- Calls are answered by a live person, 24/7. No voicemail.
Which Therma-Tru Models This Applies To
Therma-Tru is best known for its entry doors and door systems, so the practical question is how a Therma-Tru product connects to your fence. In Dallas, owners often pair a Therma-Tru door or a Therma-Tru-branded hardware set with a matching fence line, and the install has to account for both. When we quote a Therma-Tru-compatible fence install, we confirm the exact model and hardware compatibility first, because the wrong gate hinge or latch spec will not match the door hardware you already have.
How to identify what you’re working with:
- Check the label. Therma-Tru products carry a manufacturer label on the door edge, jamb, or hardware plate. Photograph it before you call.
- Measure the opening, not the part. Fence gate widths in Dallas vary; measure the clear opening and the hinge-side reveal.
- Match the hardware finish. Therma-Tru hardware finishes run in families. If a gate latch or hinge needs to match, note the finish name from the label.
On the OEM-versus-aftermarket call: for hardware and gate components, quality aftermarket equivalents that match the Therma-Tru spec are usually fine and cost less. For anything structural or load-bearing, we stick to the matched spec. We don’t stock parts and we don’t carry them on a truck. We source what your specific model needs, confirm it fits, then install it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Fence Installation Is Failing
Fence failures in Dallas move fast once they start. Here’s what to watch:
- Gate sag and drag. The gate hinges have lost their bite or the post has shifted, so the gate drops and scrapes the ground. That’s a hardware-and-post problem, not a gate problem.
- Leaning posts after a storm. North Texas wind and expansive clay soil work together. A post that leans after wind is usually sitting in soil that has swelled and shrunk around it.
- Wobbly pickets at the fasteners. Fasteners have backed out or the wood has softened around them. Left alone, the picket line loosens one board at a time.
- Rust or corrosion at hardware. Dallas humidity and rain cycles eat low-grade hardware quickly. Corroded hinges and latches are the first parts to fail.
- A gate that won’t latch cleanly. The gate has shifted out of square, or the latch has worn. Either way, it’s a security gap you’ll want to close.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Therma-Tru-compatible fence installation in Dallas runs $3,500 – $9,000 installed. What drives the number: linear feet, the material and height you choose, how many gates, and whether existing posts can be reused or need replacement. Old post removal and haul-away can add to the total.
Our pricing is upfront and itemized. You see parts and labor broken out, so you know what you’re paying for. That’s the number you pay. No change orders hiding in the fine print. The work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which makes a bigger fence or gate project easier to fit into your budget.
DIY or Call Us?
What you can safely do yourself: walk the fence line, check gates for drag, test latch alignment, and photograph the Therma-Tru label for reference. That’s useful information.
Where DIY goes wrong: setting posts in Dallas clay, getting gate geometry square, and matching Therma-Tru hardware specs. A post set shallow in our soil will lean within a season. A gate hung out of square will rack and stop latching. And if the project involves high-tension gate springs or any load-bearing element, that’s not DIY territory. It’s genuinely dangerous to attempt yourself, and it’s a job for a trained professional. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and we’ll tell you honestly whether a repair or a full replacement makes more sense.
Call (844) 797-4808 to schedule your free estimate. A live person answers 24/7.
FAQs
Expect 12 – 20 years for a well-built wood fence in Dallas, and longer for aluminum or composite. Our heat, humidity, and clay soil shorten lifespan compared to drier climates. Hardware is the first thing to wear. The 730-Day Done Right Promise covers our workmanship through that window.
Often yes. A leaning post or a sagging gate can usually be re-set or re-hung for far less than a full install. We assess the whole line, not just the failing section, and we tell you plainly whether repair or replacement is the better spend. Call (844) 797-4808 for a free estimate either way.
Most Therma-Tru-compatible fence installs finish in a single visit. Larger yards, multiple gates, or post replacement can run into a second day. We’ll give you the timeline in writing before we start.
We don’t stock parts or carry them on a truck. We identify your exact Therma-Tru model and hardware spec, source the correct part or quality aftermarket equivalent, confirm the fit, and install. That’s how we avoid the wrong-hinge problem that turns a two-hour job into two return trips. Call (844) 797-4808 to start.
Whether it’s fence install, kitchen work with KraftMaid and Cambria, or countertops in Silestone, Groundwork Construction Co. of Dallas handles the whole job. Call (844) 797-4808 for your free project estimate and design consult. The number you see is the number you pay.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.