Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Dallas Owner’s Guide
We install Barrette-compatible kitchen remodeling in Dallas, and whole-kitchen projects typically run $14,000 to $45,000 installed, with cabinet installation alone landing at $4,000 to $13,000. That covers removal of the old layout, new cabinetry matched to your existing Barrette door style and finish, countertop, backsplash, and final trim. We also give free written estimates and can usually get an assessor to your Dallas home within a few business days. Most owners discover a problem the same way: a cabinet door that suddenly won’t sit flush, a drawer box that drags on the frame, or a hinge that lets the door hang a quarter inch low no matter how many times you tighten the screw. That’s usually not a cosmetic issue. It’s a worn hinge plate, a stripped screw hole in the cabinet stile, or a door that’s warped from Dallas humidity, and each one points to a different fix.

Which Barrette Models This Applies To
Barrette makes cabinets, and cabinet hardware and components, across several product lines sold through home centers and dealers. The part that matters most is the hinge and drawer glide system specific to your cabinet series. Barrette’s European-style concealed hinges and their side-mount and undermount drawer glides are not interchangeable across every line: a hinge bored for a 35mm cup on a 45mm pattern fits some series and not others, and a glide rated for a standard 21-inch drawer depth won’t carry a deep pot drawer without sagging. Before you order anything, measure the hinge cup diameter, the screw-hole spacing on the cabinet stile, and the drawer box width. Then check the label inside the cabinet door or on the back panel. If the label is gone, a photo of the hinge and a measurement of the cup usually gets you the right match. On a Dallas remodel, we match the OEM part when it’s available and a verified equivalent when it isn’t, and we tell you which one you’re getting and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Doors that hang low or rub the frame. The hinge plate has loosened or the adjustment screw has backed out under the weight of a solid-wood door. Dallas heat cycling through summer expands and contracts the door until the hinge loses its grip.
- Screws that spin instead of tightening. The screw hole in the cabinet stile has stripped, usually because the door was slammed shut for years. A slightly larger screw or a glued dowel plug buys time; a new hinge plate with fresh fastening is the real fix.
- Drawers that drag or won’t close flush. The glide has worn its rollers or the cabinet box has racked out of square. In older Dallas homes, settling foundations twist the box and no glide swap fixes that on its own.
- Soft-close that slams. The damper in the hinge or glide has failed. It’s the cheapest part on the cabinet and the one that fails first in a busy kitchen.
- Peeling or bubbling finish near the sink and range. Moisture and steam have gotten under the laminate or veneer. This one is a door or panel replacement, not a hardware swap, and it’s common in Dallas kitchens that run a dishwasher and cooktop hard.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Dallas homeowners actually pay for the work, parts and labor together:
- Cabinet installation (full run): $4,000 – $13,000
- Full kitchen remodel: $14,000 – $45,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Single door or hinge/glide repair: quoted per visit, usually a fraction of a full install
What drives the range is door count, whether the boxes stay or get replaced, and the finish you choose. We give written line-item quotes with upfront pricing, no surprises, and the number you see is the number you pay. Every job carries our 730-Day Done Right Promise, and if it’s not done right, we make it right.
DIY or Call Us?
You can safely tighten exposed hinge screws, swap a soft-close damper, and clean and lubricate drawer glides. That’s most of what a homeowner should touch. Where it goes wrong: cross-threading a new hinge into a stripped stile, forcing an out-of-square drawer back onto its track, and cutting a door to fit rather than fixing the alignment that’s actually causing the rub. None of that is dangerous the way a garage spring is, but it’s the difference between a five-year fix and a five-week one. If a door or drawer still won’t sit right after a tightening pass, call us at (844) 797-4808 for a free estimate and let a technician look at it.
FAQs
Expect 8 to 12 years of daily use before a hinge damper or glide roller fails, and shorter in a kitchen that sees heavy cooking and Dallas summer humidity. Soft-close mechanisms are usually the first to go, and a single failed hinge doesn’t mean the whole cabinet needs replacing.
Often yes. A stripped screw hole can be plugged and re-drilled, a failed damper can be swapped without touching the hinge body, and a misaligned door usually needs adjustment, not a new part. If the door box itself is warped or water-damaged, replacement is the honest answer, and we’ll tell you that straight.
A single hinge or glide replacement takes under an hour; a full set across a kitchen takes half a day. A full cabinet installation is a multi-day project depending on layout and countertop timing. We schedule around your kitchen so you’re not without a working sink and range longer than necessary.
We match the OEM part when your cabinet series is still supported, and a spec-verified equivalent when it isn’t, using exact cup diameter, screw pattern, and drawer depth. Groundwork Construction Co. of Dallas is an independent service provider, not affiliated with Barrette. We also install and service KraftMaid, Cambria, and Silestone cabinetry and surfaces if you’re weighing an upgrade while we’re there.
Ready to stop fighting a door that won’t close? Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free estimate and design consult. A live person answers 24/7, our technicians are background-checked and arrive in uniform, and you can take $1,000 off projects over $10,000 with 0% financing for 18 months available. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.