A Groundwork company - serving Dallas, TX

Jerith Fence Installation in Dallas, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Fence Installation: The Dallas Owner’s Guide

Jerith aluminum ornamental fence installation in Dallas typically runs $3,500 – $9,000 installed, depending on linear footage, height (4 ft, 5 ft, or 6 ft), grade changes, and gate count. Most single-run residential jobs are completed in one to two days once materials are on site. Groundwork Construction Co. of Dallas is an independent installer, not affiliated with Jerith, and we work with genuine Jerith components and matching aftermarket parts sourced to your model’s specs.

Professional construction worker applying caulk to seal a newly installed window frame. in Dallas, TX

Call (844) 797-4808

Owners usually find the problem the same way: a gate that suddenly drags on the driveway, a post that wobbles after a spring storm, or a panel section that rattles loose at the bottom rail. In Dallas, our expansive clay soil moves with every wet-dry cycle, so footing and post-set failures show up here that you won’t see in sandier markets. If your fence is leaning, sagging, or rattling, call (844) 797-4808 for a free estimate.

Key Takeaways

  • Installed Jerith aluminum fence in Dallas: $3,500 – $9,000, gates and grade work included.
  • Jerith models are matched by post size, rail spacing, and picket profile, not by fence height alone.
  • Most failures trace back to footing depth and soil movement, not the aluminum itself.
  • Work is covered by our 730-Day Done Right Promise.

Which Jerith Models This Applies To

Jerith makes aluminum ornamental fence in several residential lines, and the parts are not interchangeable across them. The three specs that decide compatibility are post size (commonly 2 in. or 2.5 in. square), rail spacing and picket spacing, and picket profile (flat, spear-top, or pressed-point). A 5 ft section from one line will not bolt up cleanly to a 4 ft post from another without adapters, and forcing it is how you get a gate that binds six months later.

On an existing fence, look for the manufacturer label inside a post cap or stamped on a hinge bracket. If the label is gone, we measure the post, the rail-to-rail distance, and the picket center spacing on site. Jerith’s own replacement parts are the safe match when the fence is under warranty or when the profile is discontinued; quality aftermarket equivalents in the same gauge and finish cost less and perform the same on out-of-warranty runs. We’ll tell you which route makes sense for your fence, not ours. We also source KraftMaid, Cambria, and Silestone products for other trades.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Fence Installation Is Failing

  • A gate that drags or won’t latch. Usually a settled post or a worn hinge and self-closing spring, not a bent gate frame. Dallas soil shifts enough that a post set too shallow will move within a season or two.
  • Leaning or wobbling posts. Footings that were poured too shallow or without proper concrete depth give way as the clay expands and contracts. This is the most common failure we see on Dallas fences.
  • Loose or rattling panels. Usually a failed bottom rail bracket or a picket that’s worked free of its rail channel. Catch it early and it’s a part swap; ignore it and the section racks out of square.
  • Rust or finish failure at welds and cut ends. Jerith’s powder coat holds up well, but any field-cut or drilled point that wasn’t touched up will corrode faster in humid North Texas summers.
  • Rack and twist along a slope. A fence installed level instead of racked to follow the grade puts constant stress on brackets and hinges, and parts fail in a predictable line from the low end up.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed Jerith aluminum fence installation in Dallas runs $3,500 – $9,000. The range moves with linear footage, fence height, how many gates, slope and grade work, and whether old fence and footings need removal. Here’s what drives the number:

  • Posts and footings: proper depth-set concrete footings, the single biggest factor in how long the fence lasts.
  • Panels and pickets: matched to your model’s post size and profile.
  • Gates and hardware: hinges, latches, and self-closing springs.
  • Labor and cleanup: including hauling off the old fence where needed.

You get a written line-item quote up front. The number you see is the number you pay, and all work is covered by our 730-Day Done Right Promise.

Professional construction worker applying caulk to seal a newly installed window frame. in Dallas, TX

DIY or Call Us?

You can safely check a few things yourself: measure the post and rail spacing so you know your model line, confirm the gate hardware is snug, and look for the manufacturer label inside a post cap. What goes wrong for homeowners is the footing work. Digging out and re-pouring a post at the right depth, racking a panel to a slope correctly, and getting a gate to swing true are where the job turns into a call anyway. Aluminum fence parts aren’t dangerous like garage door springs, but a post that isn’t set right leaves you with the same sagging gate next spring. If the footing or gate’s the issue, let us handle it. Call (844) 797-4808 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch