Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Dallas Owner’s Guide
We install and repair driveways and paver systems built around ActiveYards hardscape components in Dallas, and a typical paver driveway install runs $7,000 – $18,000; repairs to settling or failing base sections are quoted individually and estimates are always free. Most Dallas owners don’t realize something is wrong until a single paver rocks underfoot, a hairline joint opens along the apron, or water starts pooling against the garage slab after a hard rain. By then the base course is usually the culprit, not the surface stone. Understanding how the ActiveYards system is layered is the fastest way to figure out whether you’re looking at a cosmetic fix or a rebuild.

Which ActiveYards Driveway & Pavers Systems This Applies To
ActiveYards is a brand family built around a coordinated hardscape system – retaining wall blocks, pavers, and matching caps – so identifying your exact series matters before anyone quotes a repair. Look for the manufacturing stamp on the paver face or the original project paperwork. The stamp usually carries the series name and a production code, and if the stamp has weathered smooth, we can match thickness and face profile against known ActiveYards lines on site. The practical gotcha: dye lots shift between production runs, so a spot repair using pavers from a different year will read as a patch under Texas sun even when the color name matches. We always check whether a replacement batch is drawable from the same lot before recommending a spot fix versus a section replacement.
On the OEM-versus-equivalent decision, there isn’t a hard aftermarket parts channel for ActiveYards pavers the way there is for, say, garage door springs. The pieces are proprietary to the series. That means “aftermarket” here usually means a compatible paver of the same nominal dimensions from another manufacturer – a real option for a driveway where a small mismatched patch is invisible from the street, less so for a front walk you stare at every day. We source through ActiveYards dealers and direct mill channels, and we’ll tell you honestly when a compatible paver makes more sense than chasing scarce original stock. We’re an independent installer, not affiliated with ActiveYards.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
- Individual pavers rock or sink. Base compaction failed under that footprint, usually from soil movement or a section installed over fill. Rocking pavers let water in, which accelerates the failure.
- Joint sand washes out after rain. Poor drainage or missing edge restraint lets water sheet across the surface and pull the joint sand with it. Dallas clay soil makes this worse because water runs off rather than soaking in.
- Heaving or tenting along a seam. Expansive clay beneath the base swells when wet and lifts the surface. This is a base problem, not a paver problem, and spot-fixing it wastes money.
- Edge pavers migrate outward. The edge restraint has failed or was never adequate. Once the perimeter loses its lock, the whole field loosens from the outside in.
- Efflorescence or persistent staining. White salt bloom or rust-colored stains signal trapped moisture or a failed sealer. Left alone, moisture cycling cracks pavers from the inside.
One Dallas-specific reality: our clay-heavy soil and the summer swing from drought to downpour puts more stress on base courses than the paver itself ever sees. We regularly see paver driveways in older neighborhoods fail along the apron within a few seasons where the original base wasn’t deep enough for the soil type.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, a full paver driveway installation runs $7,000 – $18,000. A driveway replacement – tear-out plus new base and surface – lands at $5,000 – $14,000. Concrete driveway work, if you’re comparing materials, is $4,500 – $12,000, asphalt paving $3,500 – $9,000, and driveway sealing on its own $250 – $700. The range within paver work is driven mostly by square footage, base depth required for your soil, edge restraint and drainage corrections, and whether you’re matching an existing ActiveYards series or switching lines.
We quote parts and labor as separate line items so you can see exactly what the material costs versus the install. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – and we pull the permits the work requires. The number you see on the quote is the number you pay, with 0% financing for 18 months and $1,000 off projects over $10,000 available if the scope grows.
DIY or Call Us?
You can safely walk the driveway, photograph the failures, check the edge restraint, and note where water pools after rain – all useful information that helps us quote accurately. What you shouldn’t tackle yourself is base repair or re-lifting pavers, because the hard part is invisible: recompacting and re-leveling the base course to the right depth for Dallas clay. Doing it wrong looks fixed for one rainy season and fails in the next. Get this wrong on a driveway and you’re paying twice. Call (844) 797-4808 and we’ll tell you honestly whether it’s a surface fix or a base rebuild.
FAQs
A properly installed paver driveway with an adequate base will last 25 to 30 years or more, but in Dallas clay soil the base is usually the first thing to fail – often within 5 to 10 years if the original install skipped depth. The pavers themselves outlast everything under them.
Yes – if the failure is localized to one area of base or edge, we lift the affected pavers, correct the base, and relay the originals. That usually costs a fraction of a full replacement. If the heaving runs in a continuous seam across the driveway, spot repair won’t hold.
A localized base repair is typically a one- to two-day job. A full driveway replacement runs 3 to 5 days depending on square footage, base depth, and drainage work. We’ll give you the real timeline on the quote, not a guess.
We match your stamp and production code against ActiveYards series records, then draw from dealers or mill channels carrying the same dye lot where possible. When original stock isn’t available, we’ll show you compatible alternates and explain exactly where a color or dimension shift will show.
If you’re pricing a repair or a full driveway, call (844) 797-4808 for a free estimate. Live person, 24/7. We also handle KraftMaid, Cambria, and Silestone on the interior side of your project.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.