Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Fence Installation: The Dallas Owner’s Guide
Belgard fence installation in Dallas typically runs $3,500 – $9,000 installed, depending on linear footage, panel style, and how much site prep the yard needs. That figure covers materials, labor, tear-out of the old fence, and haul-away. Belgard makes segmental retaining wall block and hardscape products rather than a proprietary fence panel system, so the honest version of “Belgard fence” here means Belgard-compatible hardscape and retaining components used in fence foundations, piers, and low retaining sections, plus the fencing Belgard distributors pair with those lines.

Owners usually discover a problem the same way. The gate starts dragging. A post leans after a hard rain. Cap blocks come loose along the base of a retaining section, or a footer cracks and drops the bottom rail out of line. In Dallas, our clay soils swell and shrink with the seasons, which moves fence footings more than most homeowners expect. By the time a post is visibly leaning, the footer has usually been shifting for a year or two.
Key Takeaways
- Typical installed price in Dallas: $3,500 – $9,000, tied to footage and site conditions.
- Belgard-compatible retaining and hardscape components sit under the fence line, not on it.
- Clay soil movement is the number-one cause of footer and post failure here.
- Every job is backed by our 730-Day Done Right Promise, and technicians arrive background-checked and in uniform.
Which Belgard Models This Applies To
Belgard’s product lines that come up most often around fences in Dallas are its retaining wall systems. The Dimension series, the Belair Wall, and the Brighton Wall are the blocks we see holding grade changes at property lines and along low terraces where a fence or gate needs a solid anchor. The exact series matters because block depth and lip configuration differ. A Dimension block and a Belair block are not interchangeable, and a gate post designed around one won’t seat correctly on the other.
Here’s how to identify what you have. Look for a stamped or molded identifier on the back face or the underside of a block; most Belgard units carry a manufacturer marking. Measure the face width, depth, and height of one block and write the numbers down. If you’re pricing a repair or a match to an existing wall, those three measurements plus a photo of the block profile will let us confirm the series before anyone orders anything. When a series has been discontinued, we tell you upfront and lay out the options rather than swapping in a near-match that shows at eye level.
The OEM-versus-aftermarket call is a real one. For visible caps and face blocks, sticking with the original Belgard series keeps the color and profile consistent. For hidden structural work such as base courses and drainage aggregate, a quality compatible equivalent does the same job at a lower cost. Our technicians have up to 12 years of experience with both approaches and will show you the difference on the quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Fence Installation Is Failing
Most failing installations announce themselves well before a post falls. These are the signals we see on the majority of Dallas calls:
- A post that leans or pivots. The footer under it has shifted or cracked. Clay soil movement and water pooling at the base cause this more than any single storm.
- Loose or missing cap blocks. Adhesive or mortar has failed and water is getting behind the cap into the wall section, which speeds up freeze-and-thaw damage in the cooler months.
- Gate sag and diagonal rack. The gate leaf is heavier than the hinge post’s footer was built to take, so the post moves and the gate drops against the latch side.
- Bottom rail pulling free of the post. A footer that dropped slightly has taken the bottom of the fence down with it, and the rail has come out of its bracket.
- Crumbling base course or washed-out gravel. Poor drainage is pulling fines out of the footer and dragging the structure down over time.
If you see any of these, the repair is almost always in the footer or base, not the visible block. That’s the part a lot of quick-fix bids miss.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Belgard-compatible fence work in Dallas lands in the $3,500 – $9,000 range for most residential jobs. The range is driven by four things: linear footage of fence or footing, how many posts or piers need rebuilding, site access for equipment, and whether drainage work has to be added. Below is how we break it down on the quote.

- Footings and post piers: $75 – $250 per post, depending on depth and whether rebar or a Belgard base course is involved.
- Belgard-compatible base or retaining section: $35 – $90 per square foot of wall face, including block, base course, drainage aggregate, and labor.
- Fence panels and rails: $18 – $45 per linear foot, material and install.
- Gate rebuild or hinge repair: $250 – $900, depending on post condition.
- Tear-out and haul-away: $200 – $600, based on volume.
Every dollar shows up in writing before work starts. The number on your quote is the number you pay, backed by the 730-Day Done Right Promise. If something isn’t right on this work, we come back and make it right.
DIY or Call Us?
Some of this is safe to check yourself. You can look for a leaning post, walk the fence line looking for loose caps, watch the gate for sag, and take photos after a heavy rain to see where water pools. If you’re handy, replacing a cap block with proper adhesive is a reasonable weekend job.
The line is where footings and structural fixes are involved. Digging out and re-setting a post footer in Dallas’s clay soil takes a proper base course, correct depth, and drainage done right – get any of that wrong and the post will lean again within a season or two. Wall sections under a fence carry the weight of a grade change, and the failure mode there is a collapse, not a wobble. Attempting to re-set a post or rebuild a retaining section without knowing the load is how homeowners end up needing a much larger repair than they started with. Because this work involves structural loads and digging around utilities, we recommend a trained professional verify what’s underground before anything is pulled or dug.
If you’ve got a leaning post, a sagging gate, or caps coming loose, call (844) 797-4808 for a free estimate. Live person, 24/7.
FAQs
Expect 15 – 20 years from a properly installed fence with correct footings and drainage, though Texas heat and clay soil stress the footer more than the fence itself. The blocks and panels routinely outlast the footer work, so getting that part right is what determines lifespan here. Call (844) 797-4808 for a free estimate and we’ll give you a realistic number for your property.
Often yes. A single leaning post, a loose cap block, or a gate hinge issue is usually a targeted repair, not a full replacement. If two or more posts in a run are compromised, or the retaining section under the fence has moved, a partial rebuild is the sounder call. Call (844) 797-4808 and we’ll tell you which applies without pushing the larger job.
Most single-post or small-section repairs finish in a single visit. A full fence run or rebuilt retaining section typically takes one to three days, depending on footage and how much footer work is needed. We’ll give you a firm timeline on the quote.
We source Belgard-compatible block and components through Belgard distributors so the series and color match what’s already on your property. We don’t keep parts on a truck or in a warehouse – each order is pulled against your measurements and confirmed against the block profile before it ships. Call (844) 797-4808 and we’ll walk through the sourcing options with you.
Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Belgard. We also work with KraftMaid, Cambria, and Silestone on the interior side of our portfolio. Groundwork Construction Co. was established in 2014 and offers three standing promotions: $1,000 Off Projects Over $10,000, a Free Project Estimate & Design Consult, and 0% Financing for 18 Months. Whether you’re weighing a fence install against a kitchen or bath project, our team can price both from foundation to finish line.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.