A Groundwork company - serving Dallas, TX

Unilock Windows & Doors in Dallas, TX

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Windows & Doors: The Dallas Owner’s Guide

We install and service windows and doors for Dallas homes, including Unilock-compatible units, with most full window replacements running $4,500 – $15,000 and impact-rated installations running $8,000 – $25,000. Most single-unit swaps are finished in one visit. Owners usually discover a problem the same way: a door that won’t latch in July, a window that fogs between the panes, or a draft you can feel across the room on a 40-degree Dallas morning. By the time you notice it, the seal, hinge, or glazing has often been failing quietly for a season or two. We’re an independent service provider, not affiliated with Unilock, and we diagnose the actual part before quoting anything.

Construction worker using a plate compactor on driveway gravel base in Dallas, TX

Call (844) 797-4808

  • Key takeaways: Dallas heat and humidity stress window seals and door hardware harder than milder climates.
  • Installed window replacement in Dallas: $4,500 – $15,000; impact-rated: $8,000 – $25,000.
  • Most single-unit swaps complete in a single visit; the number you see is the number you pay.
  • Every job backed by our 730-Day Done Right Promise and upfront pricing with no surprises.

Which Unilock Models This Applies To

Unilock window and door lines span several product families – sliding windows, single-hung and double-hung units, patio doors, and entry systems – and the part you need depends on which family and series you have. Before ordering anything, find the manufacturer label. On windows it’s usually etched into the glass corner or printed on the sash frame; on doors, look at the hinge edge of the slab and the top of the frame. Write down the series name, the size (width x height in inches), and the glass package designation if it’s listed.

That label matters more than most Dallas owners realize. Unilock, like other manufacturers, has revised sash profiles and hardware mounting patterns across production years – a lock or hinge that fits one run of a series may not fit another built a few years later. If the label is gone, we measure the rough opening and the visible glass and match to current spec rather than guessing from a photo.

Then comes the OEM-vs-aftermarket call. For visible hardware, weatherstripping, and glazing, OEM or a spec-matched equivalent is usually the right move: fit and finish have to line up with the existing unit. For internal balance components and standard seals, a quality aftermarket match often performs identically at a lower price. We quote both when both are viable and tell you where the difference actually shows up. On Dallas homes within a few miles of the Trinity River corridor, we see corrosion on door hardware and window operators show up earlier than inland, so hardware grade is worth the upgrade.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Windows & Doors Is Failing

  • Fogging or condensation between the panes. The insulated glass seal has failed and moisture is trapped inside the unit. No amount of wiping fixes it – the sealed assembly has to be replaced or the sash swapped.
  • Drafts or whistling at the frame. Weatherstripping has compressed or pulled loose, or the sash is out of square. In Dallas, this usually shows up on west- and south-facing units first.
  • A door that sticks, drags, or won’t latch. Often a sagging hinge or a shifted frame rather than the door itself. Left alone, the misalignment chews through the seal and the latch hardware.
  • Difficulty opening or closing a window. Balance or operator failure – the mechanism that holds the sash has worn out. Forcing it accelerates damage to the frame and glass.
  • Visible water intrusion or rot at the sill. Failed flashing or a degraded sill seal letting water in. This one gets worse fast in Dallas’s spring storm season and can reach the wall framing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Unilock-compatible windows and doors in Dallas depends on unit count, size, glass package, and whether the frame is sound enough for a pocket install or needs a full-frame replacement.

Scope Installed Price Range
Window replacement (standard) $4,500 – $15,000
Impact window installation $8,000 – $25,000

What drives the range: number of openings, custom sizes, impact-rated versus standard glass, and any frame or sill repair uncovered during removal. We give you a written line-item quote separating parts from labor, so you can see exactly where the money goes. No-hassle upfront pricing means the number you see is the number you pay – no change-order surprises once the unit is out. The workmanship carries our 730-Day Done Right Promise: if it’s not done right, we make it right. And $1,000 off applies to projects over $10,000, with 0% financing available for 18 months.

DIY or Call Us?

Some checks are safe and worth doing yourself. Confirm the label data, wipe and inspect the weatherstripping, tighten visible hinge screws, and test whether a sticking door is a hinge issue or a frame issue. That saves time on the call.

Where DIY goes wrong: sealed glass units can’t be repaired at home, and replacing a window sash or a full door unit involves structural openings, flashing, and water management – mistakes there show up as rot months later. Windows and doors aren’t electrical or gas work, but a bad install on a second-story opening is still a genuine fall and injury risk, and improper flashing is a slow leak you won’t see until it’s expensive. When the diagnosis points past tightening a screw, that’s our line. Our technicians are background-checked, in uniform, and bring up to 12 years of experience to the job. Call (844) 797-4808 for a free estimate, and a live person answers around the clock.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch