Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Home Additions & ADU: The Dallas Owner’s Guide
We build and install Unilock-compatible home additions and ADU (accessory dwelling unit) projects across Dallas, and a full addition typically runs $45,000 – $130,000 installed, while a detached ADU runs $90,000 – $220,000. This page covers the “parts” side of those projects: the foundation materials, paver hardscape, and structural components that carry a Unilock name and fail early here. Owners usually discover a problem the same way: a hairline crack in a retaining wall block after a summer of clay movement, pavers that heave and settle around an addition’s walkway, or a paver band that washes out at the downspout after a spring storm. Dallas sits on expansive clay soil and swings between wet springs and 100-degree summers, and that cycle is hard on anything set in the ground.

Which Unilock Models This Applies To
Unilock makes a broad line of segmental retaining wall and paver systems, and the part you need has to match the wall system family, not just the color. For additions and ADUs in Dallas, the most common systems we see are the pinless, interlocking retaining wall blocks used in terraced yards behind an addition, and the larger-format structural wall blocks used where a walkout or raised patio meets the grade. Brussel, Pioneer, and Embarcadero-style wall systems have different block dimensions and connection methods, so a capstone or connector from one line will not seat properly on another.
To identify your part, look for the stamped mark or label on the block face or pallet tag, measure the block face width and depth in inches, and note the connection style (pinless lip, pin, or geogrid-only). That measurement and the connection style are what actually match the part. On the OEM-versus-aftermarket question: Unilock’s own components are the safest match for dimensional and color consistency, while quality aftermarket retaining hardware can work for geogrid and drainage pieces, but not for visible capstones where the color lot has to match. We’re an independent contractor and not affiliated with Unilock, so we match parts to your system rather than to a brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Home Additions & ADU Is Failing
- Vertical or stair-step cracks in the wall face. This usually means the base course has settled into clay that swelled and then shrank, so the wall is no longer carrying load evenly. Left alone, the crack widens each wet-dry cycle.
- Pavers heaving, rocking, or dipping near the addition. Poor compaction of the base or a missing edge restraint lets water get under the pavers, and in Dallas that happens fast after heavy spring rain.
- Efflorescence that keeps returning after cleaning. A white haze that comes back points to water moving through the block from behind, often a drainage or grading issue rather than a surface stain.
- Washout at the wall base or downspout. Soil eroding out from under the bottom course means the drainage behind the wall isn’t moving water away, and the base is quietly losing support.
- Capstones that shift, rock, or separate from the wall. The adhesive, alignment, or connector has failed, and it’s the first piece to go when the wall underneath is moving.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas, Unilock wall and paver repair or partial replacement typically runs $45,000 – $130,000 as part of the addition scope, with small spot repairs on the low end and a full terraced wall with a walkout on the high end. What drives the range: wall height and length, whether the base has to be excavated and recompacted, geogrid and drainage materials, and how much of the visible block has to be replaced to match the existing color lot. We price the part and the labor as separate lines, so you see what the material costs and what installing it costs. All work is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right.
DIY or Call Us?
A retaining wall that holds back soil next to an addition is a load-bearing structure, and it’s the part of a Unilock project we don’t recommend tackling yourself. You can safely check the obvious things: look for cracks, note where water pools after rain, measure the wall height, and photograph the block face and pallet tag so we can identify the system. What goes wrong with DIY here is the base. Backfilling and compaction on clay soil, plus getting the geogrid and drainage correct, is where a wall starts to lean within a season or two. If a wall near your addition is cracked, leaning, or washing out, call us at (844) 797-4808 for a free estimate, and we’ll tell you straight whether it’s a repair or a rebuild.
FAQs
A properly built Unilock wall with correct base prep and drainage should last 25 to 30 years or more in Dallas, but walls built on poorly compacted clay and without drainage often show movement within 3 to 5 years. The soil here is the deciding factor, not the block. Call (844) 797-4808 for an exact quote on your wall, and estimates are free.
Sometimes yes: a single cracked capstone, a washed-out section of base, or a localized paver failure can often be repaired by re-setting and re-draining that section. If the crack or lean runs more than a course or two of the wall, a partial rebuild is usually the honest answer. We’ll give you a line-item quote either way so you can compare.
A spot repair on a Unilock wall or paver section typically takes one to two days, while rebuilding a full terraced wall with a walkout commonly runs one to two weeks depending on height, access, and drainage work. We’ll give you a realistic schedule in writing before we start. Call (844) 797-4808 to schedule your free estimate.
We source Unilock-compatible block, capstone, geogrid, and drainage components to match your existing wall system and color lot, and we order based on the stamped label or measured block dimensions rather than a guess. If an exact color-lot match isn’t available, we’ll tell you before you commit. Call (844) 797-4808 to get your part matched and priced.
Additions and ADUs aren’t the only Unilock-adjacent work we handle in Dallas. The same material and brand partners show up across our kitchens and baths, with KraftMaid, Cambria, and Silestone, so you can plan your whole project with one contractor from foundation to finish line. Call (844) 797-4808 for a free estimate and design consult. We answer with a live person 24/7, offer 0% financing for 18 months, and take $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.