Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Dallas Owner’s Guide
We install Tremron-compatible bathroom remodeling for Dallas homeowners at a typical installed cost of $9,000 – $28,000, and most projects are scheduled rather than same-day. Tremron is a paver and hardscape brand, so the honest answer is that your “Tremron bathroom” is a paver shower floor, accent wall, or wet-area tile install – and when it fails, it shows up as loose pavers underfoot, grout that won’t stay put, or a slow drain you keep plunging. Owners usually find us after a paver pops free in a walk-in shower and the contractor who set it won’t come back. We’re an independent service provider, not affiliated with Tremron.

Key Takeaways
- Installed bathroom remodeling in Dallas runs $9,000 – $28,000; small baths land at $5,000 – $12,000.
- Most Tremron paver failures in Dallas come from Texas soil movement and shower moisture, not bad tile.
- We match your existing Tremron colors and thickness before we replace anything.
- All work is covered by our 730-Day Done Right Promise, in writing.
Which Tremron Models This Applies To
Tremron isn’t a fixture manufacturer, so there’s no model number stamped on your vanity. What matters is which Tremron paver line and thickness your wet-area install used. The common lines we see in Dallas bathrooms are Tremron’s Signature, Tremron Series, and older paver profiles in 60mm and 80mm thickness, plus the accent pavers and coping many owners use as shower curbs or tub-surround tops. Pop one loose paver and look for a stamp, batch code, or color name – that tells us more than a photo will.
Compatibility is where people get hurt. An 80mm paver won’t sit flush where a 60mm was set, and a different color lot from the same line will read as a mismatch under bathroom lighting even when the name matches. When your run is discontinued, we source a current equivalent and show you the side-by-side before anything is ordered. Aftermarket pavers can work fine for a wet-area floor if the thickness, absorption, and finish match; OEM matters most when you’re trying to tie into an existing field of pavers without a visible seam. Most jobs we schedule get done in a single visit once material is in hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
- A paver rocks or lifts underfoot. Water has gotten under the setting bed and the bond has broken. Dallas clay soil swells and shrinks seasonally, and that movement finds loose pavers first.
- Grout cracks along the same line every few months. A moving substrate, not bad grout. Re-grouting without addressing the base buys you a year at best.
- Efflorescence or white haze on the paver face. Moisture pushing through the paver and leaving mineral salts. It’s a sign water is trapped behind the install.
- Standing water near the drain or curb. The shower pan has lost slope or the weep path is clogged. You’ll see ponding that never fully drains.
- Dark, wet-looking pavers that won’t dry. Saturation under the floor. In Dallas bathrooms without proper ventilation this compounds fast and will eventually reach the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full bathroom remodeling in Dallas with us runs $9,000 – $28,000. A small bathroom remodel lands at $5,000 – $12,000, a walk-in shower installation is $4,500 – $12,000, a tub-to-shower conversion is $3,500 – $10,000, and a straight shower replacement is $3,000 – $8,500. A vanity install, if that’s the only scope, is $800 – $3,000.
| Scope in Dallas | Installed price |
|---|---|
| Bathroom remodel (full) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives the top of the range: matching a discontinued Tremron color, moving plumbing, and re-sloping a shower pan. What we include: tear-out, substrate repair, waterproofing, paver or tile setting, grout, and cleanup. You get upfront pricing – the number you see is the number you pay – and a written line-item quote before work starts. Every project carries our 730-Day Done Right Promise. We also install KraftMaid, Cambria, and Silestone for the cabinetry and countertop side of the room.
DIY or Call Us?
You can safely check a few things yourself. Look for a loose paver, confirm what drains and what ponds, and photograph the batch or color name on the back of a popped paver so you know what you’re matching. That’s useful information for a quote.
Where DIY goes wrong: re-setting a paver over a wet, unwaterproofed base, and re-grouting a floor that’s moving underneath. You’ll get a clean-looking fix that fails again within a season, and each redo adds cost. Shower pan and waterproofing work is where we see homeowners spend more than a professional install would have cost. If you’re in Dallas and the floor has already lifted once, call (844) 797-4808 and we’ll assess it.
FAQs
With a properly waterproofed base and correct slope, a quality paver floor holds for 15 – 25 years; most failures we see in Dallas come from a base issue, not the paver itself. If your install is under a decade old and already rocking, the base is the problem. Call (844) 797-4808 for an assessment.
Sometimes – a single popped paver with an intact setting bed can be reset and re-grouted. When water has reached the substrate or the floor is moving in multiple spots, a repair is a bandage. We’ll tell you which one you’re facing honestly.
A shower replacement typically runs 1 – 3 days; a full bathroom remodel in Dallas runs 2 – 4 weeks depending on scope and material lead times. Once you pick a finish, we lock the schedule.
We match the line, thickness, and color lot to your existing install and source from current supply, showing you the match before ordering. We don’t stock parts and don’t carry them on a truck. If your line is discontinued, we present the closest current equivalent for your approval.
No. You get upfront pricing before we begin, and the number you see is the number you pay – that’s how our 730-Day Done Right Promise and no-surprise pricing work together. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000.
Ready to price it? Call (844) 797-4808 for a free project estimate and design consult. Calls are answered by a live person 24/7, and every project is handled by background-checked, uniformed technicians. From start to finish, it’s one contractor and one warranty – backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.