Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Dallas Owner’s Guide
If you’re pricing an Oldcastle kitchen remodel in Dallas, plan on $14,000 – $45,000 for a full install, with cabinet work usually landing between $4,000 and $13,000 and countertops between $2,000 and $6,500. Oldcastle products are sold through dealers and big-box channels rather than direct, so the real variable is whether the components you have in hand match what’s actually spec’d for your space. Most Dallas owners find out something is off after the first cabinet run leaves the wall or a countertop template comes back two inches short.

Which Oldcastle Models This Applies To
Oldcastle covers a wide product family, and “Oldcastle kitchen” can mean anything from stock cabinet boxes to hardscape and masonry components. Before you order anything, find the label inside the cabinet door, on the back panel, or on the countertop underside. The label usually carries a series code and a finish code. Photograph it. A dealer can match a series code in minutes; guessing from a catalog photo will cost you weeks.
The compatibility gotcha in Dallas: Oldcastle stock cabinet runs have changed box depths and toe-kick heights across production years, so a door from a newer run often won’t hang true on an older frame without shimming. Measure the actual box depth, the toe-kick height, and the door overlay. Those three numbers, not the finish name, determine whether a replacement part fits.
On the OEM question, we’re straight with Dallas homeowners: OEM replacement doors and panels give you an exact match, but lead times can stretch and pricing runs high for a single piece. A quality aftermarket equivalent in the same overlay and finish gets you 90% of the look for less, and no one notices at eye level. Where we push back is on anything structural. Boxes, rails, and face frames should be matched to spec, not improvised.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Kitchen Remodeling Is Failing
Here’s what Dallas owners actually call us about, and what’s usually behind it:
- Doors that rub or won’t close flush. The hinge plate has shifted or the overlay was never set right for the box depth. This shows up fastest in summer humidity, when Dallas door frames swell a fraction and a marginal fit becomes a bad fit.
- Drawer boxes that stick halfway. Undermount slides wear at the roller, or the box has racked out of square. In homes built before 2000, we regularly see slides that were rated for lighter loads than what the drawer actually holds.
- Countertop seams opening or darkening. A failed seam bond, usually from improper clamping at install or adhesive that didn’t cure right. Dallas heat cycling through the kitchen window makes this worse over a few summers.
- Cabinet boxes pulling away from the wall. Fasteners into drywall instead of studs, or studs that were never hit. This is a safety issue, not a cosmetic one. A loaded upper cabinet that comes down is a real injury risk.
- Finish peeling or yellowing near the range. Heat and grease exposure on a finish that was never rated for that zone. Oldcastle finishes hold up well; a finish failing this fast usually means the wrong finish spec for the location.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Oldcastle-related kitchen work in Dallas runs like this:
| Scope | Installed price range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves you up or down the range: whether the layout changes, whether plumbing or electrical needs to move, and whether we’re replacing a single component or the whole run. Everything we quote is line-item, upfront, and fixed. The number you see is the number you pay. Every job is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right. We also carry $1,000 off projects over $10,000 and 0% financing for 18 months.

DIY or Call Us?
You can safely check a lot of this yourself. Open and close every door and drawer and note what sticks. Photograph the label inside the cabinet. Measure box depth, toe-kick height, and door overlay. Write down the series code. That’s the homework that makes a parts conversation fast.
Where DIY goes wrong: anything involving fasteners into framing, countertop handling, or gas and electrical near the range. A loaded upper cabinet that isn’t into studs is a hazard. Countertop slabs are heavy and brittle, and a two-person lift without the right clamps is how seams fail. We’re licensed and insured, our technicians are background-checked and arrive in uniform, and our techs have up to 12 years of experience. Call us at (844) 797-4808 to schedule a free estimate.
FAQs
With proper installation, 15 – 25 years is realistic for Oldcastle cabinet boxes and doors. Dallas humidity is the variable that shortens that: door and drawer hardware takes the worst of it, and finishes near the range degrade faster than the boxes do. Call (844) 797-4808 for an exact quote – estimates are free.
Often yes. A shifted hinge, a worn slide, or a failed seam can usually be corrected without replacing the component. Cracked boxes or split face frames are a replacement, not a repair. We’ll tell you which one you’re looking at before we quote anything.
A single door or drawer replacement is typically a one-visit job. A full cabinet or countertop replacement runs longer depending on lead time for the matched part. We’ll give you the schedule in writing with the quote.
We match off the series code and finish code from your label, not from a catalog photo. If the OEM part is back-ordered, we’ll walk you through the aftermarket equivalent that matches overlay and finish. Oldcastle itself doesn’t sell direct, so we work through dealer channels. KraftMaid, Cambria, and Silestone are also brands we service if you’re comparing.
Groundwork Construction Co. of Dallas is an independent service provider. We’re not affiliated with Oldcastle.
Ready to price it? Call (844) 797-4808 to schedule your free estimate and design consult. We’re a live person, 24/7, and we serve Dallas and the surrounding metro. From foundation to finish line, upfront pricing and no surprises.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.