Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Home Additions & ADU: The Dallas Owner’s Guide
We build and finish Oldcastle-compatible home additions and ADUs in Dallas, and a full addition typically runs $45,000 – $130,000 installed, while a detached ADU lands between $90,000 – $220,000. These aren’t same-day projects – expect weeks, not hours, on the schedule. What we can do same day is get a live person on the phone at (844) 797-4808 and put a real number in front of you with a free on-site estimate.

Owners usually discover a failure the slow way. A hairline crack shows up where the Oldcastle block wall meets the existing slab, or the door in the addition starts catching on the frame three summers in. Sometimes it’s moisture wicking through the base course after a hard North Texas rain. In every case, the failure points to something specific – settling, a flashing gap, or a mix that didn’t cure right for our clay soils – and that’s what we trace before we quote.
Which Oldcastle Models This Applies To
Oldcastle makes a broad family of masonry and hardscape products that spec into additions and ADUs across Dallas, and the system you’re working with determines everything downstream: the block series, the cap and trim profiles, the lintel spacing, and the mortar bed depth. The most reliable way to identify what you have is the pallet tag or the stamp on the unit itself, plus a few field measurements – actual block face dimensions, wall height at the corner, and the reveal on any modular face. Don’t guess from a photo. Units that look identical online can run a quarter-inch different in bed depth, and that gap is where leaks start.
OEM versus aftermarket is a real decision here. Oldcastle-specific profiles keep water tables, caps, and coursing lines matched to what’s already installed, which matters most on a visible wall. For hidden structural block or a foundation course under a slab, a quality equivalent that matches compressive rating and dimension is a legitimate cost-saving move. Our technicians have up to 12 years of experience matching units to existing walls, and we say plainly which parts need the exact profile and which don’t. We’re an independent service provider, not affiliated with Oldcastle – we work with the product, not for the brand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Home Additions & ADU Is Failing
- Cracks that stair-step up the mortar joints. That pattern usually means differential settling, and in Dallas the culprit is often our expansive clay soil swelling and shrinking through wet and dry cycles. Left alone, the crack widens and the wall loses load capacity.
- Efflorescence (white chalky powder) on the base course. This is moisture moving through the masonry and leaving salt behind. It points to a missing or failed flashing detail, or a drainage plane that never got installed right.
- Doors and windows out of square in the addition. When a frame racks or a door starts rubbing, the opening has moved. That’s a structural settlement signature, not a hinge problem.
- Water staining or soft mortar at the wall-to-slab transition. Water is getting behind the wall and has nowhere to go. In older Dallas additions, we regularly see this where the base course was set directly on grade with no capillary break.
- Spalling or flaking faces on exterior units. Freeze-thaw cycles in a Texas winter, plus poor initial curing, cause the face to shear off. Once spalling starts, that unit is done and needs replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers break down for Dallas, with labor, materials, and permit coordination where applicable:
- Home addition (attached): $45,000 – $130,000
- Detached ADU: $90,000 – $220,000
- Garage conversion to living space: $30,000 – $80,000
What drives the range: square footage, whether you’re on a slab or pier-and-beam, the block and trim profile you choose, and how much site work the foundation needs. Our pricing is upfront – the number you see is the number you pay, and we hand you a written line-item quote so parts and labor are separated. Every build is covered by our 730-Day Done Right Promise, which means if it’s not done right, we make it right. Permits get pulled and inspections get passed before we call a job finished.

DIY or Call Us?
You can safely do the detective work: photograph the pallet tag, measure the block faces and wall height, note where cracks and stains appear, and check whether water pools at the base of the addition after a rain. That information makes your estimate sharper.
Where DIY goes wrong is at the structural line. Cutting into a load-bearing masonry wall, repointing a cracked joint, or trying to correct settlement without understanding the soil under the slab can turn a $2,000 repair into a foundation problem. There’s no safe weekend version of jacking a footing or rebuilding a lintel. Repointing done with the wrong mortar mix is worse than not doing it, because harder mortar traps moisture and cracks the adjacent units. Call us at (844) 797-4808 and we’ll tell you honestly whether it’s a repair or something bigger. Estimates are free, and a live person answers 24/7.
FAQs
A properly built masonry addition should hold 50-plus years in North Texas, but our expansive clay soil is the wildcard. The block itself outlasts almost everything; it’s the foundation and flashing that determine real-world lifespan. Call (844) 797-4808 for an exact assessment of your situation.
Usually yes, if the failure is cosmetic or localized. Cracked mortar joints, single spalled units, and failed flashing are repairable. If the settlement has moved a load-bearing wall or the foundation is actively shifting, repair may only buy time. We tell you which case you’re in before you spend a dollar.
Small repairs like flashing replacement or repointing a section run a few days. A wall rebuild or new addition runs weeks depending on permitting with the City of Dallas and weather. You’ll get a written schedule with the estimate, not a vague promise.
We work through the same supply channels your original builder used, matching by profile, dimension, and compressive rating against your pallet tag and field measurements. We also work with KraftMaid, Cambria, and Silestone on the interior finishes side of these builds. We don’t claim to hold parts in stock – we source to spec for your project. Call (844) 797-4808 to start your free estimate.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.