Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The Dallas Owner’s Guide
We install Cover-compatible kitchen remodeling across Dallas, with full kitchen projects typically landing between $14,000 and $45,000 installed. If your Cover kitchen remodel has a failing component, it usually shows up long before any visible damage: a cabinet door dragging on its hinge, a drawer that won’t close flush, a countertop seam lifting, or a backsplash tile popping loose above the range. In Dallas, we see this most often in homes where summer attic heat hits 140°F and the cabinet boxes and adhesives take a beating year after year.

Which Cover Models This Applies To
Cover builds kitchen remodeling systems in a few series, and the part you need depends on which one is in your home. The most reliable way to identify your Cover model is the label inside the cabinet box or on the underside of the drawer, plus a tape measure across the opening. Cover uses standard 24-inch base cabinet depths and 12-inch drawer box heights on most of its lines, but the face frame width and hinge bore spacing vary by series. That hinge bore is the gotcha: a 35mm bore with 45mm screw spacing is common, but some Cover lines use a different offset, and a hinge that doesn’t match will not align the door no matter how carefully you adjust it.
For Cover specifically, OEM replacement parts match your cabinet series exactly, which matters when you’re replacing a single door or drawer front in a run of eight. Quality aftermarket equivalents work fine for hinges, slides, and shelf pins, and they cost less. For anything structural or finish-matched, stick with OEM. We source Cover parts based on the model number and a photo of the label, and we also work with KraftMaid, Cambria, and Silestone for homeowners who want to upgrade while they’re in there. We are an independent service provider and not affiliated with Cover.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Kitchen Remodeling Is Failing
- Doors that won’t stay adjusted. Usually a worn hinge or stripped screw hole in the face frame. Dallas humidity swings from 30% in winter to 90% in summer, and wood cabinet frames move with it, so hinge screws loosen faster here than in drier climates.
- Drawers that bind or drop. The slide is failing or the drawer box has racked out of square. Undermount slides last 8 to 12 years in most Dallas kitchens before the soft-close mechanism wears out.
- Countertop seams lifting or darkening. Failed adhesive or a seam that’s absorbed moisture. In Dallas, a seam near the sink or dishwasher is the first to go because of the heat and steam cycle.
- Backsplash tile coming loose. Thinset or mastic failure behind the tile, often above the range where heat cycling is worst. A hollow sound when you tap the tile means it’s already released.
- Cabinet boxes pulling away from the wall. Anchor screws working loose, common in older Dallas homes where wall studs aren’t where you’d expect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Cover kitchen remodeling work in Dallas runs $14,000 to $45,000 for a full kitchen, with line items you can price separately:
| Item | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet series and door style, countertop material (Cambria and Silestone sit at the upper end), whether plumbing or electrical needs to move, and how much of the existing layout you keep. Our pricing is upfront, no surprises – the number you see is the number you pay. Every project is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space.
DIY or Call Us?
You can safely check your Cover cabinets yourself: open every door and drawer, look for sagging, listen for squeaks, tap the backsplash for hollow spots, and photograph the model label. What you shouldn’t do is pull a cabinet box off the wall, reset a countertop seam, or re-anchor a run of uppers alone. A falling upper cabinet is a real injury risk, and a countertop that’s pried wrong cracks and costs more to replace than the original install. Hinges and drawer slides are a reasonable DIY swap if you match the bore and spacing exactly. Beyond that, call us at (844) 797-4808 – a live person answers 24/7 and estimates are free.
FAQs
How long do Cover kitchen cabinets and parts last in Dallas? Expect 15 to 25 years from cabinet boxes and 8 to 12 years from slides and hinges in most Dallas homes. The heat and humidity here speed up wear on moving parts, so hinge and slide replacement is the most common service we do.
Can the part be repaired instead of replaced? Often yes. A stripped hinge screw hole can be filled and re-drilled, a drawer slide can be swapped without touching the box, and a lifting seam can sometimes be re-bonded. We’ll tell you honestly if repair is the better call. Call (844) 797-4808 for a free estimate.
How long does the swap take? A hinge or slide replacement is usually done in a single visit. Cabinet or countertop work runs one to three days depending on scope. We give you the timeline in writing before we start.
How do you source the Cover part? We match your model number and label photo to the correct Cover series part, then confirm OEM versus quality aftermarket with you before ordering. No parts are carried on a truck – every part is matched to your specific cabinet. Call (844) 797-4808 to get started.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.